RH METAL BEVELED MEDICINE CABINE Instruction manual

METAL BEVELED MEDICINE CABINET
ASSEMBLY A ND I NSTAL L AT I ON I NSTRUCT I ONS
ENGLISH

(B)
(A)
(C)
(D)
RH.COM
REVISION 03-17-2023
METAL BEVELED MEDICINE CABINET
PARTS INCLUDED
A) Medicine cabinet
B) Glass shelves (large (4), small (3))
C) Tapping screws (4)
D) Shelf supports (large (16), small (12))
METAL BEVELED MEDICINE CABINET - ENGLISH

(C) tapping screws
(D) shelf supports
RH.COM
REVISION 03-17-2023
STORAGE
1. Store medicine cabinet according to carton markings.
2. Do not stack objects on carton.
HANDLING
1. Due to the weight and size of the cabinet, it is advised to have at
least two people handle the package.
SAFETY AND PRE-INSTALLATION INFORMATION
1. Professional installation is recommended.
2. To provide adequate support, you or your installer should install
blocking per the size of the inset medicine cabinet purchased. See
CHART A for sizing information on the recessed portion of the box.
3. At a minimum, you will need a level, screw driver or drill to install
your cabinet. Tools are not included.
4. The multidirectional door allows you to open the medicine cabinet
door towards the left or towards the right depending on your
needs. Rotate the medicine cabinet 180 degrees to obtain the
desired hinge position.
INSTALLATION OF CABINET
1. Insert your medicine cabinet into your pre-installed blocking in the
wall cavity. (FIGURE 1)
2. Mount cabinet to the wall by using at least 4 tapping screws,
fastening the recessed portion of the cabinet to the wall blocking.
Use screws appropriate for the substrate to create the blocking
support. Additional screws and anchors may be used to offer
additional support depending on your blocking substrate.
(FIGURE 2)
3. Once the cabinet is installed, you can insert the supports for your
glass shelves. Large cabinets require 16 supports for the four
provided shelves, while small cabinets require 12 supports for the
three provided shelves. (FIGURE 3)
CHART A
Large Small
22 7/8" (58 cm) W 17 1/4" (44 cm) W
32 3/4" (83 cm) H 23 5/8" (60 cm) H
3 7/8" (10 cm) D 3 7/8" (10 cm) D
FIGURE 1
FIGURE 2
FIGURE 3
METAL BEVELED MEDICINE CABINET - ENGLISH

FIGURE 4
FIGURE 5
(A) (B)
BRISTOL INSET MEDICINE CABINET ENGLISH
REVISION 05-01-2022 RH.COM
INSTALLATION OF CABINET CONT.
4. Insert glass shelf into the supports and use
a screw driver to tighten the screw underneath,
repeat for each shelf.
5. If you find the door needs adjustment, the left
screw A is used to adjust the tightness of the door,
while the right screw B is for door alignment, these
can be adjusted after installation to ensure the
door sits at the right angle and does not hang open.
A) B)
4)
5)
RH.COM
REVISION 03-17-2023
4. Insert glass shelf into the supports. Use a screw driver to tighten
the screw underneath. Repeat for each shelf. (FIGURE 4)
5. If you find the door needs adjustment, the left screw A is used to
adjust the tightness of the door, while the right screw B is for door
alignment. These can be adjusted after installation to ensure the
door sits at the right angle and does not hang open. (FIGURE 5)
WARRANTY
Your product comes with a limited 90 day manufacturer’s warranty that
covers any defects in material, workmanship under normal use and
maintenance during the warranty period. We will repair the product at
no charge, using new or refurbished replacement parts. The warranty
does not cover conditions, malfunctions or damage resulting from
negligence, improper installation, maintenance, care, storage, shipping,
or modification by the end user. Removing the door before, during or
after installation will void the warranty.
CLEANING INSTRUCTIONS
To maintain and protect the finish on any metal parts, clean with a soft,
damp cloth only. Glass should be cleaned with glass cleaner and a soft
cloth. It is advised to never clean metal parts with an abrasive cleaner.
While metal parts will age and change color over time, this process will
be affected by improper care or maintenance.
METAL BEVELED MEDICINE CABINET - ENGLISH