RH Newman User manual

Newman Task Table Lamp
Page 1 of 2
2.
1.

Newman Task Table Lamp
This lamp has a polarized plug (one blade is wider than the
other) as a feature to reduce the risk of electric shock.
This plug will t in a polarized outlet only one way. If the plug
does not t fully in the outlet, reverse the plug. If it still does not
t, contact a qualied electrician. Never use with an extension
This xture has been rated for one (1) 10-Watt integrated LED
All wires are connected. When unpacking, be careful not to pull
wires, as a bad connection may result. Do not connect electricity
until your xture is fully assembled. To reduce the risk of re,
electrical shock, or personal injury, always turn off xture and allow it
to cool prior to replacing the lightbulb. Do not touch or look directly
at the bulb when xture is illuminated. Keep ammable materials
away from lit bulb.
THIS PRODUCT IS NOT A TOY AND HAS NO PLAY VALUE.
W A R N I N G : S T R A N G U L AT I O N HAZ AR D
Keep cord at least 3 feet away from cribs, bassinets, and toddler beds.
Keep out of reach of children under 3 years of age.
AS S E MB LY & I NS TALLATION
1. Carefully remove all parts from the box and remove all plastic
coverings.
2.
CAR E INS TR UCTIONS
Wipe all surfaces with a soft, dry cloth. Do not use any harsh cleaners
(including ammonia-based products) or abrasives on your xture, as
they will damage the nish.
Page 2 of 2
I M P O R T A N T S A F E T Y I N S T R U C T I O N S
cord unless plug can be fully inserted. Do not alter the plug.
W AR N ING S
Plug into proper electrical outlet and test xture.
3. Assembly is complete.
energy-saving bulb (included). To avoid the risk of re, do not
exceed the recommended wattage.
CAUTION:
REMINDER:
To prevent tipping, make sure the arm is assembled facing forward,
as shown in diagram 2 on page 1.
The LED bulb is replaceable. please check with the RH service
center for more information.