RH T-BASE User manual

T-BASE TASK FLOOR LAMP
P A R T S E N C L O S E D
(A) Threaded Collar
(B) Inner Pole
(C) Bulb (1)
(D) Socket
(E) Dimmer Switch
Page 1 of 2

T-BASE TASK FLOOR LAMP
For safety purposes, this lamp is equipped with a polarized plug (one
blade is wider than the other). If the plug does not fit securely into
outlet, do not force it-contact a professional electrician. Use the
plug with an extension cord only if it can be fully inserted into the
cord’s socket. Never alter the plug in any way.
This fixture has been rated for one (1) 4-Watt Type G9 Dimmable
LED lightbulb (included). To avoid the risk of fire, do not exceed
the recommended wattage.
W A R N I N G S
All wires are connected. When unpacking, be careful not to pull
wires, as a bad connection may result. Do not connect electricity
until your fixture is fully assembled. To reduce the risk of fire,
electrical shock, or personal injury, always turn off fixture and allow it
to cool prior to replacing the lightbulb. Do not touch or look directly
at the bulb when fixture is illuminated. Keep flammable materials
away from lit bulb.
W A R N I N G : This product can expose you to lead, which is
known to the State of California to cause cancer and birth defects or
other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
W A R N I N G : S T R A N G U L A T I O N H AZARD
Keep cord at least 3 feet away from cribs, bassinets, and toddler beds.
Keep out of reach of children under 3 years of age.
A S S E M B LY & I N S T A L L A T I O N
1. Carefully remove all parts from the box and remove all plastic
coverings.
2.
Insert Bulb (C) into Socket (D) by pushing in.
4.
5.
Push the button on Dimmer Switch (E) to desired luminance.
Assembly is complete.
HEIGHT ADJUSTMENT
1. Loosen Threaded Collar (A) in a counterclockwise direction.
2. Adjust lamp by pulling or pushing Inner Pole (B) up or down to
desired height.
3. Tighten the Threaded Collar (A) in a clockwise direction.
CARE INSTRUCTIONS
Wipe all surfaces with a soft, dry cloth. Do not use any harsh cleaners
(including ammonia-based products) or abrasives on your lamp, as they
3. Plug into proper electrical outlet and test fixture.
will damage the finish.
Page 2 of 2
IMPORTANT SAFETY INSTRUCTIONS
THIS PRODUCT IS NOT A TOY AND HAS NO PLAY
VALUE.