RH PAUILLAC FABRIC SHADE TABLE LAMP User manual

PAUILLAC FABRIC SHADE TABLE LAMP
OF F
OUT
IN
(A)
(B)
(C)
(D)
PARTS ENCLOSED
(A) Shade (1)
(B) Bulb (1)
(C) Shade Bracket (1)
(D) LED Bulb (1)

PAUILLAC FABRIC SHADE TABLE LAMP
IMPORTANT SAFETY INSTRUCTIONS
INSTALLATION BY A LICENSED ELECTRICIAN IS STRONGLY
RECOMMENDED.
For safety purposes, this lamp is equipped with a polarized plug (one
blade is wider than the other). If the plug does not fit securely into
outlet, do not force it – contact a professional electrician. Use the
plug with an extension cord only if it can be fully inserted into the
cord’s socket. Never alter the plug in any way.
This fixture has been rated for one (1) 40-Watt max Type T3 lightbulb
(included), one (1) 9-Watt compact fluorescent lightbulb (not
included) or one (1) 5.5-Watt LED lightbulb (included). To avoid the
risk of fire, do not exceed the recommended wattage.
WARNINGS
All wires are connected. When unpacking, be careful not to pull
wires, as a bad connection may result. Do not connect electricity
until your fixture is fully assembled. To reduce the risk of fire,
electrical shock, or personal injury, always turn off fixture and allow it
to cool prior to replacing the lightbulb. Do not touch or look directly
at the bulb when fixture is illuminated. Keep flammable materials
away from lit bulb.
WARNING: This product can expose you to lead, which is
known to the State of California to cause cancer and birth defects or
other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
THIS PRODUCT IS NOT A TOY AND HAS NO
PLAY VALUE.
WARNING: STRANGULATION HAZARD
Keep cord at least 3 feet away from cribs, bassinets, and toddler
beds. Keep out of reach of children under 3 years of age.
ASSEMBLY & INSTALLATION
1. Carefully remove all parts from the box and remove all plastic
coverings.
2. Insert Bulb (B) or LED Bulb (D) into the socket.
3. Place Shade (A) onto Shade Bracket (C).
4. Remove plastic cover from the electrical plug.
5. Plug into proper electrical outlet and test fixture.
6. Assembly is complete.
CARE INSTRUCTIONS
Do not use polishes or cleaners on the lamp. Wipe clean with a soft,
dry cloth.