RH SONORA Programming manual

SONORA TABLE LAMP
ASSEMBLY & INSTALLATION INSTRUCTIONS
UNITED STATES ENGLISH

SONORA TABLE LAMP UNITED STATES ENGLISH
RH.COM
REVISION 04/23/22
SONORA TABLE LAMP
PARTS INCLUDED
(A) Finial (1)
(B) Harp (1)
(C) Harp Saddle (4)
(D) LED Bulb (1)
(A)
(B)
(D)
(C)

SONORA TABLE LAMP UNITED STATES ENGLISH
RH.COM
REVISION 04/23/22
IMPORTANT: PLEASE READ
PLEASE FOLLOW THE ASSEMBLY INSTRUCTIONS CLOSELY.
IMPROPER ASSEMBLY OR INSTALLATION CAN RESULT IN
PERSONAL OR PROPERTY DAMAGE. IF YOU ARE UNSURE
ABOUT YOUR WALL TYPE OR WHAT MOUNTING METHOD YOU
SHOULD USE, CONSULT A QUALIFIED PROFESSIONAL OR YOUR
LOCAL HARDWARE STORE.
INSTALLATION BY A LICENSED ELECTRICIAN IS STRONGLY
RECOMMENDED.
IMPORTANT SAFETY FEATURES
BULBS
This fixture has been rated for up to one (1) 100-watt maximum Type
A incandescent lightbulbs or, up to one (1) 10-watt maximum LED
lightbulbs. To avoid the risk of fire, do not exceed the recommended
wattage.
DIMMER SWITCH COMPATIBILITY
This fixture is dimmer switch compatible, and may only be used with a
(an) on-line dimmer switch.
WARNINGS
All wires are connected. When unpacking, be careful not to pull wires,
as damage may result. Do not connect electricity until the fixture is
fully assembled. To reduce the risk of fire, electrical shock, or personal
injury, always turn off fixture and allow it to cool prior to replacing
the lightbulb. Do not touch or look directly at the bulb when fixture is
illuminated. Keep flammable materials away from lit bulb.
WARNING STRANGULATION HAZARD
Keep cord at least 3 feet (92 cm) away from cribs, bassinets, and
toddler beds.
Keep out of reach of children under 3 years of age.
THIS PRODUCT IS NOT A TOY AND HAS NO PLAY VALUE.
ASSEMBLY AND INSTALLATION
SHUT OFF THE MAIN ELECTRICAL SUPPLY FROM
THE FUSE BOX OR CIRCUIT BREAKER PANEL.
1. Carefully remove all parts from the box and remove all plastic
coverings.
2. Insert the LED Bulb (D) into the threaded socket.
3. Insert Harp (B) into the Harp Saddle (C).
4. Unscrew the Finial (A) from the Harp (B) and place the desired
shade (not included) over the Harp (B).
5. Attach the Finial (A) and tighten to secure the shade.
6. Plug into proper electrical outlet and test fixture.
7. Assembly is complete.
WARRANTY
If you are not completely satisfied with your purchase, please contact
us to return or exchange your item(s) within 30 days of the delivery
date, with proof of purchase. Note that returns or exchanges are not
accepted for special orders, items that have been installed, mattresses
and/or foundations no longer in their original packaging, and other
items listed below. Other exclusions may apply. Contact us for details.
Unfortunately, galleries cannot accept returns of furniture or other
large items.
CARE INSTRUCTIONS
Do not use polishes or cleaners on the fixture. Wipe clean with a soft,
dry cloth.