Riester ri-thermo tymPRO+ User manual

ri-thermo®
tymPRO+tymPRO+
ORDERING INFORMATION
APPEARANCE
No. 1835-BT Tympanic thermometer ri-thermo®tymPROtymPRO++Bluetooth
No. 1835 Tympanic thermometer ri-thermo®tymPROtymPRO
No. 12634 Probe cover for ri-thermo®tymPRO 1 rack / 10 pcs
No. 12640 Probe cover for ri-thermo®tymPRO 30 racks / 300 pcs
No. 12911 Anti-theft cable, length 50 cm, black, keyring at both end for ri-thermo®tymPRO
No. 12953 Calibration kit for ri-thermo®tymPRO
No. 13347 Bluetooth connectivity: Bluetooth USB-Dongle for RVS-100
Quick Start GuideQuick Start Guide
Probe coverProbe cover
ejection buttonejection button
MeasurementMeasurement
indicatorindicator
°C / °F button°C / °F button
Probe lensProbe lens
Display screenDisplay screen
Memory buttonMemory button
Probe coverProbe cover
Battery coverBattery cover
LugLug
Cradle andCradle and
probe coverprobe cover
Memory modeMemory mode
Temperature readingTemperature reading
DISPLAY SCREEN
Error messageError message
Probe cover indicatorProbe cover indicator
Temperature unitTemperature unit
Battery indicatorBattery indicator
Bluetooth symbolBluetooth symbol
((ri-thermo®tymPROtymPRO++only)only)
Please visitPlease visit riester.deriester.de for more informationfor more information

USING THE DEVICE
Replacing Probe Cover
Measuring Temperature
STEP 1. Firmly insert the thermometer probe into
new probe cover in the probe cover cassette.
You will hear two clicks when the probe cover is
attached properly.
STEP 1. To turn on ri-thermo®tymPROtymPRO, briey press and release the button.
“”, when ashing, this indicates the tymPROtymPRO is ready to use and a new probe
cover should be attached. Alternatively, attach a new probe cover to turn it on. When
ready, the thermometer displays the last measurement.
STEP 2. Lift the probe out of the cassette with a
new probe cover attached. Do not touch the cover.
Now, you can measure the temperature.
STEP 3. Briey press and release the button.
You will hear a beep to indicate measurement is
complete and thermometer may be removed. The
indicator blinks during the measurement and turns
solid blue when the measurement is completed.
STEP 4. Read the result.
The Bluetooth symbol is
for ri-thermo®tymPROtymPRO++
only.
STEP 5. Press ejection
button to discard used
probe cover into clinical
waste bin or recycling
facitilies (in line with
local guidelines).
STEP 2. Gently t the
probe with a new probe
cover into the ear canal.
Ensure that the probe
shaft is aligned with the
ear canal.
THERMOMETER
99484 Rev. A 2023-03-14
Rudolf Riester GmbH P.O. Box 35 | Bruckstraße 31 | 72417 Jungingen | Germany
Tel.: [phone] | Fax.: [phone] | [e-mail] | www.riester.de
Refer to instructions for use for full functional usage
Please visitPlease visit riester.deriester.de for more informationfor more information