Rimage Desktop 360i Operating and safety instructions

1110858_A
a. Power on your computer.
b. At your computer, insert the
Rimage Software for Macintosh
CD in the disc drive.
c. From your computer desktop,
select the Rimage Software CD
icon. The Rimage Software CD contents display.
d. From the software CD, select Rimage Installer.
The installation window opens.
e. Follow the onscreen prompts to complete the installation.
f. When the installation is complete, select Quit.
Install the Rimage software.
If you are unfamiliar with the procedures in this document, ask your
computer technician for help or refer to your computer documentation.
Before you begin:
• You must have administrative privileges to install the Rimage 360i
software on your computer.
• Do not plug in any cables until you are instructed to do so.
• Obtain a Macintosh computer that meets the computer specifications
listed in the ‘Learn more’ section of the
Rimage 360i User Guide.
1 2
Setup and Installation
for Macintosh®
Connect the Rimage 360i cables.
Important! You must have administrative privileges to
install the Rimage 360i software on your computer.

a. Connect the USB 2.0 cable from the Rimage 360i to
your computer USB 2.0 port.
b. Connect the power cord from the Rimage 360i to a
power outlet.
c. To power on the Rimage 360i, press the
power switch.
Note: The computer must have a USB 2.0 port.
For more information, refer to the computer
specifications listed in the ‘Learn More’ section of
your Rimage 360i User Guide.

Note: If you are prompted to restart your computer,
select Restart. The software installation completes
and the computer restarts.

USB 2.0
Cable
Power
Cord
The Rimage software for Macintosh includes an application
called Discribe®. Discribe allows you to select data and
labels for your discs. After installation, Discribe is located at
Applications > Discribe.
Power
Switch

2110858_A
43 5
6
Add the Rimage 360i to your printer list. Install the ink cartridges. Activate your software.
Learn more.
For more information about operating and maintaining your
Rimage 360i, refer to your Rimage 360i User Guide.
For information about the Discribe software, refer to the
Discribe User Manual. After you install the Rimage Software
for Macintosh, the Discribe User Manual is located on your
computer at Applications > Discribe Robot.
For additional support and product information,
go to www.rimage.com/support.html.
You have 30 days to activate your software. Until your
software is activated, you will be prompted to activate your
software each time you use it.
a. Open the ink cartridge
access door.
b. When the ink cartridge
carriages are still, lift both
cartridge latches.
c. Slide the matching ink
cartridges into the
matching carriages as
shown.
d. Close the ink cartridge
latches.
e. Close the ink cartridge
access door. The printer
initializes.
f. Align the ink cartridges. For specific
instructions, refer to the Rimage 360i User
Guide.
Ink
Cartridge
Access
Door
a. At your computer, navigate: System Preferences >
Print & Fax. The Print & Fax window opens.
b. From the Print & Fax window, select . The Printer
Browser window opens.
c. From the Printer Name list, select 360i.
d. Select Add. The printer is added to your printer list
and the Printer Browser window closes.
e. Close the Print & Fax window.
Ink
Cartridge
Latch
Using OS X v 10.4
a. At your computer, navigate: System Preferences >
Print & Fax. The Print & Fax window opens.
b. From the Print & Fax window, select Setup Printers.
The Printer List window opens.
c. From the printer list popup menu, select USB. In the
printer list, 360i displays.
d. From the printer list, select 360i.
e. Select Add. The printer is added to your printer list
and the Printer List window closes.
f. Close the Print & Fax window.
Using OS X v 10.3