Rimage DL5200 User manual

Rimage DLN5200/DL5200 Specifications
Note: For printer specifications, refer to your Everest Printer User Guide or PrismPlus! Printer User Guide.
Item Description
Rimage DLN5200 Two disc recorders, Rimage DLN5200 autoloader, an Everest printer, a network-
ready embedded PC, and Rimage software.
Rimage DL5200 Two disc recorders, Rimage DL5200 autoloader, an Everest printer, and Rimage
software.
Input Bin Capacity One removable 50-disc bin.
Output Capacities Five single-disc output trays and one 75-disc output bin.
Rimage DLN5200
(Embedded PC)
Celeron D 340 processor with 533Mhz Front Side Bus
512MB DDR2-400, SDRAM
Windows XP Embedded with Service Pack 2
Two 36 GB, Serial ATA, 10,000 RPM, 8 MB cache, Hard Drives
Rimage DL5200 PC
requirements Pentium 4 2.8 GHz, 512MB L2 Cache , 800MHz FSB
512MB DDR2-200, 400Mhz Bus
Windows 2000 Professional with SP4; Windows XP Professional with SP2 or
higher; Windows Server 2003.
Rimage recommends 4 hard drives – One for the OS, one for the Rimage System
Folder, and two for caching (one for each recorder).
One open PCI slot for the provided FireWire®/USB card.
Height 23.25 inches (59.1 cm)
Width 14.5 inches (36.8 cm)
Allow an additional 2.4 inches (6.1 cm) of space for the door to swing open.
Depth 23.5 inches (59.1 cm)
Allow an additional 2.5 inches (6.4 cm) for cabling in the rear of the autoloader.
DLN5200 Weight 51 lbs (23.2 kg) without Everest printer, 95 lbs. (43.2 kg) with Everest printer.
DL5200 Weight 44.5 lbs (20.2 kg) without Everest printer, 88.5 lbs. (40.2 kg) with Everest printer.
Power 100 – 240VAC, 60/50 Hz, 4.7 – 3.7 Amps
Operating Temperature 60° to 80º F (15.5º to– 26.7° C)
Humidity 40–80% non-condensing
5/17/2007 1