ring Stick Up Cam Operating and safety instructions

Stick Up Cam Plug-In

1. Set up your Stick Up Cam.
Download the Ring app.
The Ring app walks you through setting up and managing your
Stick Up Cam.
Search for “Ring” in one of the app stores below, or visit:
ring.com/app
Grab your Wi-Fi password.
You’ll need it to set up your Stick Up Cam.
Write it down below so it’s handy when you need it:
Download from
Windows Store
Power it up!
First, plug the included power cable into the
back of your Stick Up Cam.
Then plug the power adapter into an outlet.
Installing outdoors?
Remove the indoor plug faceplate by pressing the “PUSH” button and
sliding it o of the adapter. Then grab the included outdoor power cable,
and slide it’s connector onto the power adapter until it clicks into place.
If you plan to install Stick Up Cam
outdoors, secure the power adapter to
a wall or floor with the included screws.
32

Set up your Stick Up Cam in the Ring app.
In the Ring app, select Set Up a Device.
When prompted, select Security Cams and follow the in-app instructions.
Try it out!
After setup, tap the Live View button in the Ring app to see live video from
your Stick Up Cam.
Blue light flashing?
If the light on the front of your Stick Up Cam is flashing after setup, it’s
updating its software.
Do not unplug your Stick Up Cam while the light is flashing!
2. Install your Stick Up Cam.
Choose a location.
Stick Up Cam is happy just about anywhere, indoors or out. It comes ready
to sit on a flat surface like a table or shelf, but can also be mounted to a wall.
Choose a spot where it can provide the view you want, within reach of a
power outlet.
Table or shelf Mounted on a wall
Wanna mount to a ceiling?
Mount to a ceiling with the Ring Stick Up Cam Mount (sold separately).
54

Place it at your chosen location, then plug it in. Your Stick Up Cam is now
ready to protect you.
Once you’re done, check out the live video in the Ring app to make sure
you have the view you want.
If you’d like a downward camera angle...
Swivel the base around so that the long side faces the front, then tilt your
Stick Up Cam so it points downward.
How to use Stick Up Cam
on a table or shelf:
112 3
112
Swivel the base so the long side faces the front.
Insert and drive the security screw into the base screw location with a
standard Phillips-head screwdriver (not included).
Turn your Stick Up Cam over to access the battery compartment screw
hole, and drive the second security screw.
3
Install the security screws (optional).
Your Stick Up Cam comes with two optional security screw locations.
One secures the battery compartment, and the other secures the mounting
bracket to the base. To use them, open the battery compartment and/or
remove the mounting bracket, then pop out the rubber plug(s).
1
12
3
76

How to install Stick Up Cam
on a wall:
Remove the base.
Unscrew it using a standard Phillips-head screwdriver (not included).
Re-attach the base.
Screw it into the back of your Stick Up Cam
with the “UP” arrow on the bracket pointing
upward.
Remove the mounting bracket.
Slide it down to remove it from the base.
Drive the screws.
Hold the bracket against your
wall, making sure the “UP” arrow
is pointing upward, and mount it
with the included screws.
98