RINGFEDER GWB EKN User manual

Partner for Performance www.ringfeder.com
A
C
B
D
E F
08.2019
Assembly
Metal Bellows Couplings
RINGFEDER®GWB
GWB CKN
Fastening: Flange connections
GWB AK
Fastening: Inner conical hub
GWB PKA
Fastening: Pluggable clamping hubs
GWB EKN
Fastening: Radial set screws
GWB DKN, GWB AKN, GWB AKD
Fastening: Clamping hubs
GWB Z5106
Fastening: Split clamping hubs
EN

208.2019
TA!
!
C1
K1
V
L5
EN
Safety instructions
Rotating machine parts may injure operators and service staff!
Therefore:
Switch off the drive before assembly work.
Safeguard the machine against accidental switch-on.
Mount all covers and protection devices before switching on
the machine.
RINGFEDER®products may only be mounted by specialist staff
and for suitable applications.
Attention
Please read these instructions through carefully.
In the event of infringement of these notes all claims of
liability will become void.
RINGFEDER POWER TRANSMISSION reserves the right
to technical changes to improve the product.
RINGFEDER® Metal Bellows Couplings are accepted
state of the art.
If you experience problems or have any questions, our
technical and service staff will be happy to assist you. See
the reverse of these instructions for the corresponding
contact information.
Used lubricants
Designation
Shell Omala 220 Gear & Bearing Oil or comparable lubricant
Legend
Assembly Cleaning
Attention!
Absolutely observe!
Guided length Preload distance
Length expanding
mandrel
Clamping length
Valid data on the required tightening torque can be
found in the Product Paper & Tech Paper “Metal
Bellows Couplings“ or on our website. Please check
whether the machinery manufacturer has provided
discrepant tightening torque values.
Assembly
Metal Bellows Couplings
RINGFEDER®GWB

308.2019
A2
A1
!
A3
1
2
A4
1
2
3
C1C1
TA!
A5
1
2C1C1
TA!
GWB EKN
EN

408.2019
B1
!
B2 B3
1
2
B4
1
2
3
C1C1
B5
1
2
TA!C1C1
GWB DKN, GWB AKN, GWB AKD
EN

508.2019
C2 C3
1
1
2
2
C1
!
C4
1
1
2
2
TA!
TA!
C1C2
C5 V
GWB PKA
EN