RIOTEC LS6307 USB User manual

Programming Quick Guide
-LS6307 USB (HID)
Installation
Make sure that the scanner has the correct cable to plug
in the PC as below described:
Reset Configuration to Defaults
If you are unsure of the scanner configuration or have
scanned the incorrect codes, please scan the following
3 barcodes. This will reset the scanner to its factory
defaults settings.
** Code Programming ON
(Pro CMD : 0006010)
Load Factory Default
(Pro CMD : 0001160)
** Code Programming OFF
(Pro CMD : 0006000)
Keyboard Country
Scan the appropriate country code below to program
the keyboard for your country or language. As a
general rule, the following characters are not
supported by the scanner for countries other than the
United States: @ | $ # { } [ ] = / ‘ \ < > ~
Follow the steps mentioned below to program.
1. “Code Programming ON”
2. “Select Country Code”
3. Read digit codes (according to country code)
4. “Save ”
5. “Code Programming OFF”
** Code Programming ON
(Pro CMD : 0006010) ** Code Programming OFF
(Pro CMD : 0006000)
Select Country Code
( Pro CMD : 1103000 ) Save
(Pro CMD：0000160)
Country/Language Number Country/Language Number
U.S. 0 Netherlands(Dutch) 14
Belgium 1 Norway 15
Brazil 2 Poland 16
Canada(French) 3 Portugal 17
Czech 4 Romania 18
Denmark 5 Russia 19
Finland(Swedish) 6 Slovakia 21
France 7 Spain 22
Germany/Austria 8 Sweden 23
Greece 9 Switzerland(German) 24
Hungary 10 Turkey F 25
Israel(Hebrew) 11 Turkey Q 26
Italy 12 U.K 27
Latin-American 13 Japan 28
It is must to be read “save” after read “digit code”.
0
(Pro CMD : 0000000 ) 2 (Pro CMD : 0000020 )
1
(Pro CMD : 0000010 ) 3 (Pro CMD : 0000030 )
4
(Pro CMD : 0000040 ) 7
(Pro CMD : 0000070 )
5
(Pro CMD : 0000050 ) 8
(Pro CMD : 0000080 )
6
(
Pr
o
C
MD
:
0000
060
)
9
(
Pr
o
C
MD
:
0000090
)
Barcode Configuration Method:
(Flow chart for setup procedure :)
Start Configuration End Configuration
** Code Programming ON
(Pro CMD : 0006010)** Code Programming OFF
(Pro CMD : 0006000)
Trigger Mode Auto-Sensing
READING
MODE
Pro CMD : 0302000 Pro CMD : 0302010

Start Confi
g
uration End Confi
g
uration
** Code Programming ON
(Pro CMD : 0006010)** Code Programming OFF (Pro CMD : 0006000)
1D Symbologies On/Off – 1
CODE39ENABLE CODE 39 CODE39 DISABLE
Pro CMD : 0408020 Pro CMD : 0408010
CODE93 ENABLE CODE 93 CODE93 DISABLE
Pro CMD : 0410020 Pro CMD : 0410010
CODE 128
ENABLE CODE 128 CODE 128 DISABLE
Pro CMD : 0400020 Pro CMD : 0400010
CODABAR
ENABLE CODABAR DISABLE
CODABAR
Pro CMD : 0409020 Pro CMD : 0409010
I 2OF5 ENABLE I 2OF5 DISABLE
INTERLEAV
ED 2 OF 5
Pro CMD : 0405020 Pro CMD : 0405010
1D Symbologies On/Off – 2
UPC-A ENABLE UPC/EAN UPC-A DISABLE
Pro CMD : 0404020 Pro CMD : 0404010
UPC-E ENABLE UPC-E DISABLE
Pro CMD : 0403020 Pro CMD : 0403010
EAN-8 ENABLE EAN-8 DISABLE
Pro CMD : 0401020 Pro CMD : 0401010
EAN-13 ENABLE EAN-13 DISABLE
Pro CMD : 0402020 Pro CMD : 0402010
EAN-128 ENABLE EAN-128 DISABLE
Pro CMD : 0412020 Pro CMD : 0412010
ENABLE Industrial 25 DISABLE
Pro CMD: 0417020 Pro CMD: 0417010
2D Symbologies On/Off
Data Matrix
ENABLE Data Matrix Data Matrix DISABLE
Pro CMD : 0504020 Pro CMD : 0504010
QR Code
ENABLE QR Code DISABLE
QR Code
Pro CMD : 0502020 Pro CMD : 0502010
Aztec ENABLE Aztec Aztec DISABLE
Pro CMD : 0503020 Pro CMD : 0503010
PDF 417 ENABLE PDF 417 PDF 417 DISABLE
Pro CMD : 0501020 Pro CMD : 0501010