RiverRidge 02-154/06-096 User manual

ITEM#: 02-154/06-096 White
ITEM#: 02-155/06-097 Gray
ASSEMBLY INSTRUCTIONS
ADULT ASSEMBLY REQUIRED
WARNING
SEE FULL WARNING ON PAGE 2
This product requires assembly by an adult because of small parts. Care should be taken
in unpacking and assembling this item to keep small parts away from children. During assembly
children should be kept away from the product due to possible risk of injury.
Young children can be seriously injured or killed if furniture tips over.
Don’t use this item for a TV stand or place heavy objects on top of item.
Always use angle-braces or anchors to secure furniture to the wall.
RiverRidge®Wall Shelf with Hooks

THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER SHELF OR A TOTAL OF 60 POUNDS.
DO NOT LOAD EACH SHELF WITH MORE THAN 20 POUNDS OR 60 POUNDS TOTAL WEIGHT.
IF OVERLOADED WITH MORE THAN 20 POUNDS PER SHELF OR 60 POUNDS TOTAL
WEIGHT, SHELF MAY TIP FROM WALL AND CAUSE SERIOUS INJURY OR DEATH.
This product is suitable for children 3 years and older.

PARTS LIST
NO QTY DESCRIPTION
1 1PC
2 1PC
3 1PC
4 1PC
5 1PC
6 1PC
7 1PC
8 1PC
9
10
1PC
3PCS
Top Shelf Left Rail Board
Top Shelf Right Rail Board
Middle Shelf Left Rail Board
Middle Shelf Right Rail Board
Bottom Shelf Left Rail Board
Bottom Shelf Right Rail Board
Top Shelf
Middle Shelf
Bottom Shelf
Rear Rail Board
Rear Lower Back Board
Left Side Frame
11 1PC
12 1PC
Right Side Frame
13 1PC

TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED)
THE USE OF A POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY
DO NOT USE ITEM IF ANY PARTS ARE MISSING OR DAMAGED
PARTS LIST
NO QTYPARTS DESCRIPTION
A16PCS Wood Dowel
B
C
D
3PCS
E
F
G
2PCS
2PCS
1PC
12PCS
27PCS Screw (3.5x25mm)
Machine Screw (6x20mm)
Wood Peg
Screw (4x35mm)
Wall Mounting Paper Template
3PCS
Plastic Anchor
Screw (4x30mm)
To order replacement parts at no cost to you, email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.

STEP 1
STEP 2
1. Insert 1 screw (C) through hole on top shelf left rail board (1) and tighten to rear rail board (10).
2. Repeat above step to assemble top shelf right rail board (2) to rear rail board (10).
1. Insert 1 screw (C) through hole on middle shelf left rail board (3) and tighten to rear rail
board (10).
2. Repeat above step to assemble middle shelf right rail board (4) to rear rail board (10).

STEP 3
STEP 4
1. Insert 1 screw (C) through hole on bottom shelf left rail board (5) and tighten to rear rail
board (10).
2. Repeat above step to assemble bottom shelf right rail board (6) to rear rail board (10).
1. Insert 4 wood dowels (A) into wood dowel holes on top shelf (7).
2. Attach top shelf (7) to pre-assembled rail boards (1, 2, 10) by inserting wood dowels (A) into
wood dowel holes on rail boards (1, 2, 10).
3. Insert 7 screws (C) through holes on top shelf (7) and tighten to rail boards (1, 2, 10).

STEP 5
STEP 6
1. Insert 4 wood dowels (A) into wood dowel holes on middle shelf (8).
2. Attach middle shelf (8) to pre-assembled rail boards (3, 4, 10) by inserting wood dowels (A)
into wood dowel holes on rail boards (3, 4, 10).
3. Insert 7 screws (C) through holes on middle shelf (8) and tighten to rail boards (3, 4, 10).
1. Insert 4 wood dowels (A) into wood dowel holes on bottom shelf (9).
2. Attach bottom shelf (9) to pre-assembled rail boards (5, 6, 10) by inserting wood dowels (A)
into wood dowel holes on rail boards (5, 6, 10).
3. Insert 7 screws (C) through holes on bottom shelf (9) and tighten to rail boards (5, 6, 10).

STEP 7
1. Insert 4 wood dowels (A) into wood dowel holes on end of rear lower back board (11).
2. Attach 3 wood pegs (F) to rear lower back board (11) by inserting 3 screws (D) through
holes on rear lower back board (11) and tighten to wood pegs (F).
1. Attach pre-assembled top shelf (7) and rail boards to left side frame (12) by inserting 2
machine screws (B) through holes on top shelf left rail board (1) and tighten to left side
frame (12).
2. Repeat above step to attach middle shelf (8) and bottom shelf (9) to left side frame (12).
3. Attach rear lower back board (11) to left side frame (12) by inserting wood dowels (A) into
wood dowel holes on left side frame (12).
STEP 8

STEP 9
STEP 10
1. Attach rear lower back board (11) to right side frame (13) by inserting wood dowels (A) into
wood dowel holes on right side frame (13).
2. Attach pre-assembled top shelf (7) and rail boards to right side frame (13) by inserting 2
machine screws (B) through holes on top shelf right rail board (2) and tighten to right side
frame (13).
3. Repeat above steps to assemble middle shelf (8) and bottom shelf (9) to right side frame (13).
Option #1: Securing to Drywall
1. Using wall mounting paper template to determine position, screw 2 plastic anchors (E) into drywall.
2. Insert 2 screws (G) into holes on plastic anchors (E) and tighten.
3. Hang wall shelf on wall by inserting 2 screw heads (G) into holes on metal brackets, then slide wall
shelf down to ensure it is fixed firmly on wall.
Option #2: Securing to Drywall and Wood Stud
1. Using wall mounting paper template to determine position, screw 2 screws (G) into drywall and
wood stud and tighten.
2. Hang wall shelf on wall by inserting 2 screw heads (G) into holes on metal brackets, then slide wall
shelf down to ensure it is fixed firmly on wall.

ATTENTION ADULTS: Cabinet should be checked periodically for damage or
loose screws/parts. Take appropriate action necessary to correct hazards such as
tightening of screws and taking any damaged parts away from children.
WARNING Please make sure youritem is
secured to the wall, per assembly instructions.
CARE INSTRUCTIONS:
Wipe clean with a water dampened cloth. Wipe dry with clean cloth.
IMPORTANT:
Keep assembly instructions for future reference.

Enjoy your new RiverRidge®Wall Shelf!
To order replacement parts at no cost to you,email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.
RiverRidge® is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016
Thank you for purchasing this RiverRidge®Home item. We hope you
enjoy it and consider purchasing other RiverRidge®items.