RiverRidge 06-033 User manual

ASSEMBLY INSTRUCTIONS
RiverRidge® ROLLING SIDE CABINET
ITEM#:06-033 White
ITEM#:06-034 Espresso
ADULT ASSEMBLY REQUIRED
This product requires assembly by an adult because of the small parts. Care should be
taken in unpacking and assembling this item to keep the small parts away from children.
WARNING
Young children can be seriously injured or killed, if furniture tips over.
Don’t use this item for a TV stand.
Use angle-braces or anchors to secure furniture to the wall.

Send requests for missing or damaged parts replacements by email to :
[email protected] or call toll free 1-(844)-223-5201 or order parts on line at
www.riverridgehome.com
THIS SHELF UNIT WILL HOLD UP TO 12 POUNDS PER SHELF OR A TOTAL OF 36 POUNDS. DO
NOT LOAD EACH SHELF WITH MORE THAN 12 POUNDS. IF LOADED WITH MORE THAN 12
POUNDS PER SHELF AS THIS MAY CAUSE DAMAGE TO THE SHELF AND MAY CAUSE SERIOUS
INJURY OR DEATH.


PARTS LIST
TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILIPS SCREWDRIVER (NOT INCLUDED)
THE USE OF POWER SCREWDRIVER IS NOT RECOMMENDED
1
1PC TOP BOARD
2
1PC RIGHT SIDE PANEL
3
1PC LEFT SIDE PANEL
4 2PCS MIDDLE CROSS BAR
5
1PC BOTTOM BOARD
6
1PC SHELF
7 2PCS BOTTOM CROSS BAR
A
16PCS CAM BOLT
B
16PCS CAM LOCK
C
16PCS WOOD DOWEL
D
1PC METAL HANDLE
E 2PCS SCREW 4x20mm
F
2PCS REAR WHEEL WITH STOPPER
G
2PCS FRONT WHEEL
H
16PCS SCREW 4x12mm

STEP1
STEP-1:
1. Screw 4 Cam Bolts (A) into the pre-threaded holes on the Top Board (1).
STEP2
STEP-2:
1. Attach 2 Front Wheels (G) to Bottom Board (5) by inserting 8 Screws (H) through the holes on the
Front Wheels (G) then tighten to Bottom Board (5).
2. Attach 2 Rear Wheels with Stoppers (F) to Bottom Board (5) by inserting 8 Screws (H) through the
holes on the Rear Wheels with Stoppers (F) then tighten to Bottom Board (5).

STEP3
STEP-3:
1. Screw 4 Cam Bolts (A) into the pre-threaded holes on the Right Side Panel (2).
2. Insert 8 Wood Dowels (C) into the dowel holes on the Right Side Panel (2).
STEP4
STEP-4:
1. Screw 4 Cam Bolts (A) into the pre-threaded holes on the Left Side Panel (3).
2. Insert 8 Wood Dowels (C) into the dowel holes on the Left Side Panel (3).

STEP 5
A
A
A
AC
C
CC
C
C
C
C
STEP-5:
1. Attach 1 Bottom Cross Bar (7) to Left Side Panel (3) by inserting the Cam Bolt (A) into the cam
bolt holes and inserting Wood Dowels (C) into the dowel holes on the Bottom Cross Bar (7).
2. Insert 1 Cam Lock (B) into the cam lock holes on the Bottom Cross Bar (7), then rotate clockwise
to secure the Cam Bolts in place.
3. Repeat above steps to assemble the second Bottom Cross Bar (7) and 2 Middle Cross Bars (4) to
Left Side Panel (3).
STEP 6
4
4
7
7
STEP-6:
1. Slide Shelf (6) to the grooves on the Middle Cross Bars (4) and the Left Side Panel (3).

STEP 7
STEP-7:
1. Attach Right Side Panel (2) to pre-assembled unit by inserting the cam bolts into cam lock holes
and inserting the wood dowels into the dowel holes on the Middle Cross Bar (4) and Bottom
Cross Bar (7).
2. Insert 4 Cam Locks (B) into the cam lock holes on the Middle Cross Bar (4) and Bottom Cross Bar
(7), then rotate clockwise to secure the Cam Bolts in place.
STEP 8
STEP-8:
1.Screw 4 Cam Bolts (A) into the pre-threaded holes on the bottom board (5).

STEP 9
STEP-9:
1. Attach pre-assembled unit to Bottom Board (5) by inserting 4 Cam Bolts (A) into the cam lock
holes on the Left Side Panel (2) and Right Side Panel (3), then rotate clockwise to secure the Cam
Bolts in place.
2. Attach the Metal Handle (D) to Right Side Panel (2) by inserting 2 screws (E) through the holes on
the Right Side Panel (2), then tighten to Metal Handle (D).
STEP 10
STEP-10
1. Attach the Top Board (1) to pre-assembled unit by inserting 4 Cam Bolts into cam lock holes on
the Left Side Panel (2) and Right Side Panel (3), then inserting Cam Lock (B) into the cam lock
holes, then rotate clockwise to secure the Cam Bolt in place.

ENJOY YOUR NEW RiverRidge® ROLLING SIDE CABINET NOW !
Attention Adults: The cabinet should be checked periodically for damage or loose screws/parts.
Take appropriate action necessary to correct the hazard such as tightening of screws and taking
any damaged parts away from children.
Thank you for purchasing this RiverRidge® Home Products item. We hope you enjoy it, and
consider purchasing other RiverRidge® items.
Send requests for missing or damaged parts replacements by email to :
[email protected] or call toll free 1-(844)-223-5201 or order parts on line at
www.riverridgehome.com
RiverRidge® is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016.