RiverRidge Bayfield 06-115 User manual

ASSEMBLY INSTRUCTIONS
ITEM #: 06-115 White
RiverRidge®Bayfield Two-Door Wall Cabinet
ADULT ASSEMBLY REQUIRED
WARNING
SEE FULL WARNING ON PAGE 2
This product requires assembly by an adult because of small parts. Care should be taken
in unpacking and assembling this item to keep small parts away from children. During assembly
children should be kept away from the product due to possible risk of injury.
Young children can be seriously injured or killed if furniture tips over.
Don’t use this item for a TV stand or place heavy objects on top of item.
Always use angle-braces or anchors to secure furniture to the wall.

THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER SHELF OR A TOTAL OF
60 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 20 POUNDS OR 60
POUNDS TOTAL WEIGHT. IF OVERLOADED WITH. MORE THAN 20 POUNDS
PER SHELF OR 60 POUNDS TOTAL WEIGHT, SHELF MAY TIP FROM THE WALL
AND CAUSE SERIOUS INJURY OR DEATH.

1
2
3
4
5
6
7
10
10
11
9
9
8
Top board1PC
QTYNO DESCRIPTION
1
Left side panel1PC2
Right side panel1PC3
Front cross bar
1PC4
Adjustable shelf1PC5
Shelf1PC6
Lower cross bar
Rear cross bar
1PC7
Bottom shelf1PC8
Back board
2PCS9
Door2PCS10
1PC11
PARTS LIST

TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED)
THE USE OF A POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY
DO NOT USE ITEM IF ANY PARTS ARE MISSING OR DAMAGED
PARTS LIST
NO QTYPARTS DESCRIPTION
A8PCS Cam Bolt
B8PCS Cam Lock
C26PCS Wood Dowel
D
3PCS
E
F
Screw (2.5x10mm)
G16PCS
H
14PCS
J
4PCS
4PCS Hinge
Shelf Holder
Screw (4x45mm)
6PCS
Screw (4x12mm)
Screw (4x35mm)
Plastic Anchor3PCS
K
Wall Mounting Paper Template1PC
Plastic Connection Strip1PC
I
To order replacement parts at no cost to you, email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.

STEP 1
1. Insert 2 cam bolts (A) into cam bolt holes on left side panel (2).
2. Insert 2 cam bolts (A) into cam bolt holes on right side panel (3).
1. Insert 4 cam bolts (A) into cam bolt holes on top board (1).
1. Attach 2 hinges (E) to door (10) by inserting 4 screws (G) through holes on hinges (E), then
tighten to door (10).
2. Repeat above step to assemble 2 more hinges (E) to another door (10).
STEP 2
STEP 3
A
AA
A
A
A
A
A
1
23
GG
G
G
GG
E
E
E
x2
10

1. Insert 6 wood dowels (C) into wood dowel holes on left side panel (2).
2. Attach front cross bar (4), shelf (6), lower cross bar (7) and rear cross bar (11) to left side
panel (2) by inserting wood dowels (C) into wood dowel holes and insert cam bolts (A) into cam
lock holes on front cross bar (4), shelf (6), lower cross bar (7) a rear cross bar (11).
3. Insert 2 cam locks (B) into cam lock holes on shelf (6), then rotate clockwise to secure cam
bolts (A) in place.
1. Insert 6 wood dowels (C) into wood dowel holes on right side panel (3).
2. Attach right side panel (3) to front cross bar (4), shelf (6), lower cross bar (7) and rear cross
bar (11) to by inserting wood dowels (C) into wood dowel holes and insert cam bolts (A) into
cam lock holes on front cross bar (4), shelf (6) lower cross bar (7) and rear cross bar (11).
3. Insert 2 cam locks (B) into cam lock holes on shelf (6), then rotate clockwise to secure cam
bolts (A) in place.
STEP 4
STEP 5
CC
C
CCC
BB
4
11
2
6
7
C
C
C
C
C
C
BB
11
2
3
4
67

1. Insert 8 wood dowels (C) into wood dowel holes on top board (1).
2. Attach top board (1) to left side panel (2), right side panel (3), front cross bar (4) and cross
bar (11) by inserting wood dowels (C) into wood dowel holes and inserting cam bolts (A) into
cam lock holes on left side panel (2), right side panel (3), front cross bar (4) and rear cross
bar (11).
3. Insert 4 cam locks (B) into cam lock holes on left side panel (2) and right side panel (3), then
rotate clockwise to secure the cam bolts (A) in place.
4. Insert 1 screw (F) into screw hole on cross bar (4),then tighten to top board (1).
1. Insert 6 wood dowels (C) into wood dowel holes on left side panel (2), right side panel (3) and
lower cross bar (7).
2. Attach bottom shelf (8) to left side panel (2), right side panel (3) and lower cross bar (7) by
inserting wood dowels (C) into wood dowel holes on bottom shelf (8).
3. Insert 5 screws (F) through holes on bottom shelf (8), then tighten to left side panel (2), right
side panel (3) and lower cross bar (7).
STEP 7
F
F
F
F
F
C
C
C
C
C
C
8
STEP 6
C
CC
C
C
C
C
CF
B
B
BB
1
4
2
3

1. Slide 2 back boards (9) into grooves on plastic connection strip (I).
2. Attach 2 back boards (9) to back of cabinet by inserting 14 screws (J) through holes on back
boards (9), then tighten to cabinet.
1. Insert 4 shelf holders (D) into desired position.
2. Place adjustable shelf (5) onto 4 shelf holders (D), making sure all 4 shelf holders are at
same height.
STEP 8
STEP 9
D
DD
D
D
5
I
I
J
J
J
J
J
JJ
JJ
J
J
JJ
9
9J
9
9

1. Attach doors (10) to cabinet by inserting 8 screws (G) through holes on hinges (E), then tighten
to left side panel (2) and right side panel (3).
2. Note: Tightening screw in position “a” will adjust doors up or down; tightening screw in position
“b” will adjust doors to or from cabinet and tightening screw in position “c” will adjust doors side
to side.
G
G
G×2
G×2
G×2
b
a
a
bc
c
STEP 10
E
10
10

STEP 11
Option #1: Securing to Drywall
1. Using paper wall mounting template to determine position, screw 3 plastic anchors (K) into drywall.
2. Place cabinet against wall and insert 3 screws (H) into holes inside cabinet and into plastic anchors (K)
and tighten.
Option #2: Securing to Drywall and Wood Stud
1. Place cabinet against wall, insert 3 screws (H) through holes inside cabinet, then tighten to drywall and
wood stud.
K
H
H
DRYWALL
WALL ANCHOR
WITH SCREW
SCREW
ONLY
DRYWALL
OPTION #2OPTION #1
WOOD
STUD
ATTENTION ADULTS: Cabinet should be checked periodically for damage or
loose screws/parts. Take appropriate action necessary to correct hazards such as
tightening of screws and taking any damaged parts away from children.
WARNING Please make sure youritem is
secured to the wall, per assembly instructions.
CARE INSTRUCTIONS:
Wipe clean with a water dampened cloth. Wipe dry with clean cloth.
IMPORTANT:
Keep assembly instructions for future reference.

Enjoy your new RiverRidge®Cabinet!
To order replacement parts at no cost to you,email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.
RiverRidge® is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016
Thank you for purchasing this RiverRidge®Home item. We hope you
enjoy it and consider purchasing other RiverRidge®items.