RiverRidge Bayfield 06-115 User manual

ASSEMBLY INSTRUCTIONS
ADULT ASSEMBLY REQUIRED
WARNING SEE FULL WARNING ON PAGE 2
ITEM #: 06-115 White
RiverRidge®Bayfield Two-Door Wall Cabinet
This product requires assembly by an adult because of small parts. Care should be taken in
unpacking and assembling this item to keep small parts away from children.
Young children can be seriously injured or killed if furniture tips over.
Don’t use this item for a TV stand or place heavy objects on top of item.
Always use angle-braces or anchors to secure furniture to the wall.

THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER SHELF OR A TOTAL OF
60 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 20 POUNDS OR 60
POUNDS TOTAL WEIGHT. IF OVERLOADED WITH. MORE THAN 20 POUNDS
PER SHELF OR 60 POUNDS TOTAL WEIGHT, SHELF MAY TIP FROM THE WALL
AND CAUSE SERIOUS INJURY OR DEATH.

Top board1PC
QTYNO DESCRIPTION
1
Left side panel1PC2
Right side panel1PC3
Upper front cross bar1PC4
Adjustable shelf1PC5
Shelf1PC6
Rear lower cross bar
Upper rear cross bar
1PC7
Bottom board1PC8
Back board
2PCS9
Door2PCS10
1
2
3
4
5
6
7
10
10
11
9
9
8
1PC11

Wood Dowel (6 x 30mm)
Cam Bolt
Cam Lock
Shelf Holder
Hinge
Screw (4 x 12mm)
Screw (4 x 35mm)
Screw (4 x 45mm)
4PCS
26PCS
8PCS
8PCS
3PCS
16PCS
6PCS
4PCS
A
B
C
D
E
F
G
H
Plastic Connection Strip1PC
I
J14PCS Screw (2.5 x 10mm)
Plastic Anchor
Wall Mounting Paper Template
3PCS
1PC
K
TOOLS NEEDED FOR ASSEMBLY : FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED)
THE USE POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY
DO NOT USE THIS ITEM IF ANY PARTS ARE MISSING OR DAMAGED
To order replacement parts at no cost to you,email [e-mail]
call 1-(844)-223-5201 or order parts online at www.riverridgehome.com

STEP 1
1. Insert 2 cam bolts (A) into pre-threaded holes on left side panel (2).
2. Insert 2 cam bolts (A) into pre-threaded holes on right side panel (3).
1. Insert 4 cam bolts (A) into pre-threaded holes on top board (1).
1. Attach 2 hinges (E) to door (10) by inserting 4 screws (G) through holes on hinges (E), then
tighten to door (10).
2. Repeat above step to assemble 2 more hinges (E) to another door (10).
STEP 2
STEP 3
A
AA
A
A
A
A
A
1
23
GG
G
G
GG
E
E
E
x2
10

1. Insert 6 wood dowels (C) into wood dowel holes on left side panel (2).
2. Attach upper front cross bar (4), shelf (6), rear lower cross bar (7) and upper rear cross bar (11)
to left side panel (2) by inserting wood dowels (C) into wood dowel holes and insert cam bolts (A)
into cam lock holes on upper front cross bar (4), shelf (6), rear lower cross bar (7) and upper rear
cross bar (11).
3. Insert 2 cam locks (B) into cam lock holes on shelf (6), then rotate clockwise to secure cam
bolts (A) in place.
1. Insert 6 wood dowels (C) into wood dowel holes on right side panel (3).
2. Attach right side panel (3) to upper front cross bar (4), shelf (6), rear lower cross bar (7) and
upper rear cross bar (11) to by inserting wood dowels (C) into wood dowel holes and insert cam
bolts (A) into cam lock holes on upper front cross bar (4), shelf (6) rear lower cross bar (7) and
upper rear cross bar (11).
3. Insert 2 cam locks (B) into cam lock holes on shelf (6), then rotate clockwise to secure cam
bolts (A) in place.
STEP 4
STEP 5
CC
C
CCC
BB
4
11
2
6
7
C
C
C
C
C
C
BB
11
2
3
4
67

1. Insert 8 wood dowels (C) into wood dowel holes on top board (1).
2. Attach top board (1) to left side panel (2), right side panel (3), upper front cross bar (4) and upper
rear cross bar (11) by inserting wood dowels (C) into wood dowel holes and inserting cam
bolts (A) into cam lock holes on left side panel (2), right side panel (3), upper front cross bar (4)
and upper rear cross bar (11).
3. Insert 4 cam locks (B) into cam lock holes on left side panel (2) and right side panel (3), then
rotate clockwise to secure the cam bolts (A) in place.
4. Insert 1 screw (F) into screw hole on upper cross bar (4),then tighten to top board (1).
1. Insert 6 wood dowels (C) into wood dowel holes on left side panel (2), right side panel (3) and
rear lower cross bar (7).
2. Attach bottom board (8) to left side panel (2), right side panel (3) and rear lower cross bar (7) by
inserting wood dowels (C) into wood dowel holes on bottom board (8).
3. Insert 5 screws (F) through holes on bottom board (8), then tighten to left side panel (2), right
side panel (3) and rear lower cross bar (7).
STEP 7
F
F
F
F
F
C
C
C
C
C
C
8
STEP 6
C
CC
C
C
C
C
CF
B
B
BB
1
4
2
3

1. Slide 2 back boards (9) into grooves on plastic connection strip (I).
2. Attach 2 back boards (9) to back of cabinet by inserting 14 screws (J) through holes on back
boards (9), then tighten to cabinet.
1. Insert 4 shelf holders (D) into desired position.
2. Place adjustable shelf (5) onto 4 shelf holders (D), making sure all 4 shelf holders are at
same height.
STEP 8
STEP 9
D
DD
D
D
5
I
I
J
J
J
J
J
JJ
JJ
J
J
JJ
9
9J
9
9

1. Attach doors (10) to cabinet by inserting 8 screws (G) through holes on hinges (E), then tighten
to left side panel (2) and right side panel (3).
2. Note: Tightening screw in position “a” will adjust doors up or down; tightening screw in position
“b” will adjust doors to or from cabinet and tightening screw in position “c” will adjust doors side
to side.
G
G
G×2
G×2
G×2
b
a
a
bc
c
STEP 10
E
10
10

STEP 11
Option #1: Securing to Drywall
1. Using paper wall mounting template to determine position, screw 3 plastic anchors (K) into drywall.
2. Place cabinet against wall and insert 3 screws (H) into holes inside cabinet and into plastic anchors (K)
and tighten.
Option #2: Securing to Drywall and Wood Stud
1. Place cabinet against wall, insert 3 screws (H) through holes inside cabinet, then tighten to drywall and
wood stud.
Important: Keep assembly instructions for future reference.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose
screws/parts. Take appropriate action necessary to correct hazards such as tightening
of screws and taking any damaged parts away from children.
CARE INSTRUCTIONS:
Wipe clean with a water dampened cloth. Wipe dry with clean cloth.
WARNING Please make sure your item is
secured to the wall, per assembly instructions.

Thank you for purchasing this RiverRidge® Home item. We hope you
enjoy it and consider purchasing other RiverRidge® items.
To order replacement parts at no cost to you, email [e-mail],
call 1-(844)- 223-5201or order parts online at www.riverridgehome.com
RiverRidge® is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016
Enjoy your new RiverRidge® Cabinet!