RiverRidge 06-141 User manual

ASSEMBLY INSTRUCTIONS
ITEM #: 06-141 White
RiverRidge®Ellsworth Double Tilt-Out Laundry Hamper
ADULT ASSEMBLY REQUIRED
WARNING
SEE FULL WARNING ON PAGE 2
This product requires assembly by an adult because of small parts. Care should be taken
in unpacking and assembling this item to keep small parts away from children. During assembly
children should be kept away from the product due to possible risk of injury.
Young children can be seriously injured or killed if furniture tips over.
Don’t use this item for a TV stand or place heavy objects on top of item.
Always use angle-braces or anchors to secure furniture to the wall.

THIS UNIT WILL HOLD UP TO 25 POUNDS PER SHELF AND 15 POUNDS PER
CLOTH HAMPER OR A TOTAL OF 55 POUNDS. DO NOT LOAD EACH SHELF WITH
MORE THAN 25 POUNDS, EACH CLOTH HAMPER WITH MORE THAN 15 POUNDS
OR 55 POUNDS TOTAL WEIGHT. IF OVERLOADED WITH MORE THAN 25 POUNDS
PER SHELF, 15 POUNDS PER CLOTH HAMPER OR 55 POUNDS TOTAL WEIGHT,
SHELF MAY TIP FROM THE WALL AND CAUSE SERIOUS INJURY OR DEATH.

1
2
3
3
4
55
6
7
88
9
10
11
12
13
14
14
16
15 ×2
2PCS
QTYNO DESCRIPTION
1
2PCS2
4PCS3
2PCS4
4PCS5
2PCS6
2PCS7
4PCS8
Cloth Hamper
Hamper Front Door
Hamper Back Panel
Hamper Side Panel
Hamper Bottom Board
Hamper Support Bar
Hamper Left Cross Bar
Hamper Right Cross Bar
Wooden Rod
2PCS9
1PC10 Top Board
Left Side Panel
1PC11
1PC12 Right Side Panel
Bottom Board
1PC13
2PCS14 Back Board
Middle Support Panel
1PC15
1PC16 Middle Support Feet
PARTS LIST

Wood Dowel
Cam Bolt
Cam Lock
Hamper Stopper
Hinge
Knob
Machine Screw (4x18mm)
4PCS
12PCS
14PCS
14PCS
2PCS
2PCS
4PCS
A
B
C
D
E
F
G
Screw (4x15mm)
Screw (4x10mm)
8PCS
2PCS
H
I
Screw (4x30mm)
Screw (4x20mm)
2PCS
40PCS
J
K
TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED)
THE USE OF A POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY
DO NOT USE ITEM IF ANY PARTS ARE MISSING OR DAMAGED
PARTS LIST
NO PARTS QTY DESCRIPTION
Screw (3x12mm)
16PCS
L
Screw (2.5x10mm)
20PCS
M
Adjustable Anchor Bracket2PCS
N
Plastic Anchor2PCS
O
To order replacement parts at no cost to you, email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.

STEP 1
STEP 2
STEP 3
F
F
LL
L
L
LL
E
E
E
G
G
1
×2
JJ
J
J
JJ
JJ
1
5
5
×2
II
II
3
3
6
7
×2
1. Attach 2 hinges (E) to hamper front door (1) by inserting 4 screws (L) through holes on
hinges (E), then tighten to hamper front door (1).
2. Attach knob (G) to hamper front door (1) by inserting machine screws (F) through hole on
hamper front door (1), then tighten to knob (G).
3. Repeat above steps to assemble hinges (E) and knob (G) to another hamper front door (1).
1. Attach 2 hamper support bars (5) to hamper front door (1) by inserting 8 screws (J) through
holes on hamper support bars (5), then tighten to hamper front door (1).
2. Repeat above step to assemble hamper support bars to another hamper front door (1).
1. Attach hamper left cross bar (6) to hamper side panel (3) by inserting 2 screws (I) through
holes on hamper side panel (3), then tighten to hamper left cross bar (6).
2. Attach hamper right cross bar (7) to hamper side panel (3) by inserting 2 screws (I) through
holes on hamper side panel (3), then tighten to hamper right cross bar (7).
3. Repeat above steps to assemble another hamper left cross bar (6) and hamper right cross
bar (7) to other hamper side panels (3)

STEP 4
STEP 5
J
JJ
J
J
J
33
3
3
4
22
1
1
6
7
J
J
J
J
J
J
1
3
3
6
5
5
7
×2
×2
1. Attach 2 hamper side panels (3) to hamper front door (1) by inserting 6 screws (J) through
holes on hamper side panels (3), then tighten to hamper support bars (5).
2. Repeat above step to assemble another 2 hamper side panels (3) to hamper front door (1).
1. Slide hamper bottom board (4) into groove on hamper front door (1).
2. Attach hamper back panel (2) to hamper side panels (3) and hamper bottom board (4), make
sure hamper bottom board (4) slides into groove on hamper back panel (2).
3. Insert 6 screws (J) though holes on hamper side panels (3), then tighten to hamper back
panel (2).
4. Repeat above steps to assemble another hamper bottom board (4) and hamper back panel (2)
to other hamper side panels (3).

13
13
13
STEP 6
STEP 7
15
15
16
A
A
A
A
B
B
B
B
C
C
1. Screw 2 cam bolts (A) into cam bolt holes on bottom board (13).
2. Insert 2 wood dowels into wood dowel holes on bottom board (13)
3. Attach middle support panel (15) to bottom board (13) by inserting cam bolts (A) into cam lock
holes and wood dowels (C) into wood dowel holes on middle support panel (15).
4. Insert 2 cam locks (B) into cam lock holes on middle support panel (15), then rotate clockwise
to secure cam bolts (A) in place.
1. Screw 2 cam bolts (A) into cam bolt holes on bottom board (13).
2. Attach middle support feet (16) to bottom board (13) by inserting cam bolts (A) into cam lock
holes on middle support feet (16).
3. Insert 2 cam locks (B) into cam lock holes on middle support feet (16), then rotate clockwise to
secure cam bolts (A) in place.

STEP 8
STEP 9
11
12 A
A
A
A
11
12
B
B
B
B
C
C
C
C
13
15
1. Screw 2 cam bolts (A) into cam bolt holes on left side panel (11).
2. Screw 2 cam bolts (A) into cam bolt holes on right side panel (12).
1. Insert 4 wood dowels (C) into wood dowel holes on left side panel (11) and right side
panel (12).
2. Attach bottom board (13) to left side panel (11) by inserting cam bolts (A) into cam lock holes
and wood dowels (C) into wood dowel holes on bottom board (13).
3. Insert 2 cam locks (B) into cam lock holes, then rotate clockwise to secure cam bolts (A)
in place.
4. Repeat above steps to assemble right side panel (12) to bottom board (13).

STEP 10
STEP 11
A
A
A
A
A
A
N
N
N
H
H
H
10
11
12
13
B
B
B
B
B
B
C
C
C
C
15
10
1. Screw 6 cam bolts (A) into cam bolt holes on top board (10).
2. Attach 2 adjustable anchor brackets (N) to top board (10) by inserting 2 screws (H) through
holes on adjustable anchor brackets (N), then tighten to top board (10).
1. Insert 6 wood dowels (C) into wood dowel holes on top board (10).
2. Attach top board (10) to left side panel (11), middle support panel (15) and right side panel (12)
by inserting wood dowels (C) into wood dowel holes and inserting cam bolts (A) into cam lock
holes on left side panel (11), middle support panel (15) and right side panel (12).
3. Insert 6 cam locks (B) into cam lock holes on left side panel (11), middle support panel (15)
and right side panel (12), then rotate clockwise to secure cam bolts (A) in place.

11
13
12
12
STEP 12
STEP 13
10
10
LL
EEEEE
LLL
14
14
M
M
M
M
M
M
M
MMM
M
M
MM
M
M
M
MM
M
3
7
1
1. Attach assembled hampers to outside cabinet by inserting 8 screws (L) through 4 hinges (E),
then tighten to bottom board (13).
1. Attach 2 back boards (14) to back of cabinet by inserting 20 screws (M) through holes on
back boards(14), then tighten to back of cabinet.

11
STEP 15
10
D
DDD
D1
1
STEP 14
DRYWALL
WALL ANCHOR
WITH SCREW
SCREW
ONLY
DRYWALL
OPTION #2OPTION #1
WOOD
STUD
11
N10
K
K
K
KK
O
O
O
3
3
12
1
1
6
7
1. Insert 4 hamper stoppers (D) into holes on left side panel (11), middle support panel (15) and
right side panel (12).
Option #1: Securing to Drywall
1. Position cabinet against wall in desired location. Using a pencil, make 2 small marks on wall through
holes on brackets (N). Move cabinet away from wall and screw 2 plastic anchors (O) into wall on
pencil marks.
2. Place cabinet against wall, insert 2 screws (K) through holes on brackets (N), then tighten to plastic
anchors (O).
Option #2: Securing to Drywall and Wood Stud
1. Position cabinet against wall in desired location. Insert 2 screws (K) through holes on brackets (N),
then tighten through drywall and into wood stud.
*Tip: Anchor brackets (N) can be adjusted to correct distance from wall to cabinet as needed. Once
adjusted, be sure to re-tighten brackets inside cabinet for stability.

STEP 16
99
9
3
3
9
×2 ×2
11
11
10
10
1
1
1
1
8
8
1. Insert 2 wooden rods (8) through tabs on cloth hamper (9).
2. Place wooden rods (8) and cloth hamper (9) into cabinet as shown.
Insert wooden rods (8)
into grooves on hamper side panels (3) to avoid movement.
3. Repeat above steps to assemble other wooden rods (8) and cloth hamper to unit.
IMPORTANT:
Keep assembly instructions for future reference.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose
screws/parts. Take appropriate action necessary to correct hazards such as tightening
of screws and taking any damaged parts away from children.
CARE INSTRUCTIONS:
Wipe clean with a water dampened cloth. Wipe dry with clean cloth.
WARNING Please make sure your item is
secured to the wall, per assembly instructions.

Enjoy Your New RiverRidge®Hamper!
To order replacement parts at no cost to you, email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.
Thank you for purchasing this RiverRidge® Home item. We hope you
enjoy it and consider purchasing other RiverRidge® items.
RiverRidge® is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016