RiverRidge Somerset 06-039 User manual

ASSEMBLY INSTRUCTIONS
RiverRidge® SOMERSET 2 DOOR WALL CABINET
ITEM #:06-039 WHITE
ITEM #:06-078 GRAY

Send requests for missing or damaged parts replacements by email to:
[e-mail] or call toll free 1-(844)-223-5201 or order parts on line at
www.riverridgehome.com
THIS SHELF UNITWILL HOLD UP TO25POUNDS PER SHELF OR ATOTAL OF75 POUNDS. DO
NOT LOAD EACH SHELF WITH MORE THAN 25POUNDS AND A TOTAL OF75 POUNDS TOTAL
WEIGHT. IF OVERLOADED WITH MORE THAN 25 POUNDS PER SHELF AND 75 POUNDS TOTAL
WEIGHT THE SHELF MAY FALL FROM THE WALL AND CAUSE SERIOUS INJURY OR DEATH.

PARTS LIST
NO PARTS QTY DESCRIPTION
1
1PC LEFT DOOR
2
1PC RIGHT DOOR
3
1PC RIGHT SIDE PANEL
4
1PC LEFT SIDE PANEL
5
1PC CROSS BAR
6
1PC SHELF
7
1PC TOP BOARD
8
1PC BOTTOM BOARD
9
1PC UPPER BACK BOARD
10
1PC MIDDLE BACK BOARD
11
1PC LOWER BACK BOARD
12
1PC ADJUSTABLE SHELF
13
1PC RIGHT SUPPORT BOARD
14
1PC LEFT SUPPORT BOARD

NO PARTS QTY DESCRIPTION
A
20PCS WOOD DOWEL
B
16PCS CAM BOLT
C
16PCS CAM LOCK
D
26PCS WOOD SCREW 3X10MM
E
4PCS HINGE
F
2PCS MAGNET PLATE
G
20PCS WOOD SCREW 3X12MM
H
1SET MAGNET WITH 2 SCREWS
I
4PCS SHELF HOLDER
J
4PCS MACHINE SCREW
4X15MM
K
2PCS HANDLE
L
2PCS PLASTIC ANCHOR
M
2PCS WOOD SCREW 4X40MM
N
1PC PLASTIC CONNECTION
STRIP

STEP 1
STEP 1
1.Attach 1 magnet plate (F) to left door (1) by inserting 1 wood screw (D) through hole on magnet plate (F) and
tighten to left door (1).
2.Attach 1 handle (K) to left door (1) by inserting 2 machine screws (J) through holes on left door (1) and tighten
to handle (K).
3.Repeat above steps to assemble another magnet plate (F) & handle (K) to right door(2).
STEP 2
STEP 2
1.Insert 2 wood dowels (A) into dowel holes on right support board (13) .
2.Screw 3 cam bolts (B) into pre-threaded holes on right support board (13).
3.Attach 2 metal hinges (E) to right support board(13) by inserting 6 wood screws (D) through holes on metal
hinges (E) and tighten to right support board (13).
4.Repeat above steps for left support board(14).

STEP 3
STEP 3
1.Attach right support board (13) to right side panel (3) by inserting wood dowels (A) into dowel holes and
cam bolts (B) into cam lock holes on right side panel (3).
2.Insert 3 cam locks (C) into cam lock holes on right side panel (3) and rotate clockwise to secure cam bolts
(B) in place.
3.Repeat above steps to assemble left side panel (4) and left support board (14).
STEP 4
STEP 4
1.Screw 2 cam bolts (B) into pre-threaded hole on left side panel (4) and right side panel (3).
2.Insert 8 wood dowels (A) into dowel holes on left side panel (4) and right side panel (3).
3.Attach cross bar (5) to left side panel (4) by inserting wood dowels (A) into dowel holes on cross bar (5).
4.Attach shelf (6) to left side panel (4) by inserting cam bolt (B) and wood dowels (A) into holes on shelf (6),
then insert 1 cam lock (C) into cam lock hole on shelf (6) and rotate clockwise to secure the cam bolt (B) in
place.
5.Attach right side panel (3) to cross bar (5) and shelf (6) by inserting wood dowels (A) into holes on cross
bar (5), and inserting cam bolt (B) and wood dowels (A) into holes on shelf (6).
6.Insert 1 cam lock (C) into cam lock hole on shelf (6) and rotate clockwise to secure cam bolt (B) in place.
C
13
C
C
3
14
C
C
C
4

STEP 5
STEP 5
1.Screw 4 cam bolts (B) into the pre-threaded holes on bottom board (8).
2.Insert 4 wood dowels (A) into dowel holes on bottom board (8).
3.Attach bottom board (8) to left side panel (4) and right side panel (3) by inserting cam bolts (B) and wood
dowels (A) into holes on left side panel (4) and right side panel (3).
4.Insert 4 cam locks (C) into cam lock holes on left side panel (4) and right side panel (3) and rotate
clockwise to secure cam bolts (B) in place.
5.Attach magnet (H) to top board (7) by inserting 2 wood screws (H) through holes on magnet (H) and tighten
to bottom of top board (7).
6.Screw 4 cam bolts (B) into pre-threaded holes on top board (7).
7.Insert 4 wood dowels (A) into dowel holes on the bottom of top board (7).
8.Attach top board (7) to left side panel (4) & right side panel (3) by inserting wood dowels (A) and cam
bolts (B) into dowel holes and cam lock holes on left side panel (4) and right side panel(3).
9.Insert 4 cam locks (C) into cam lock holes on left side panel (4) and right side panel (3) and rotate clockwise to
secure cam bolts (B) in place.

STEP 6
STEP 6
1.Connect upper back board (9) and middle back board (10) together by sliding into plastic connection strip (N).
2.Attach upper back board (9) and middle back board (10) to cabinet by inserting wood screws (G) through
holes on upper back board (9) and middle back board (10), then tighten to cabinet.
3.Attach lower back board (11) to cabinet by inserting wood screws (G) through holes on lower back board (11)
and tighten to cabinet.
STEP 7
STEP 7
1.Attach left door (1) to left support panel (14) by inserting 6 wood screws (D) through holes on metal
hinges (E) and tighten to left door (1).
2.Repeat above step to assemble right door(2).
3.Adjust hinges to make doors close tight as needed.
90°
G
7
G
9
9
N
10
3
10
11
2
D
1

STEP 8
STEP 8
1. Place drawing with hole positions on wall in desired position and drill 2 holes.
2. Insert 2 plastic anchors (L) into holes and attach cabinet in place by inserting 2 long wood screws (M)
through holes on cross bar (5) and tighten into plastic anchors (L) in wall.
STEP 9
STEP 9
1.Insert 4 plastic holders (I) into holes on left side panel (4) and right side panel (3).
2.Make sure shelf holders (I) are at same height.
3.Place adjustable shelf (12) onto shelf holders (I).
4
12
I
3