RiverRidge Bayfield 06-116 White User manual

ASSEMBLY INSTRUCTIONS
ADULT ASSEMBLY REQUIRED
WARNING SEE FULL WARNING ON PAGE 2
ITEM #: 06-116 White
RiverRidge®Bayfield Linen Tower with Open Shelves
This product requires assembly by an adult because of small parts. Care should be taken in
unpacking and assembling this item to keep small parts away from children.
Young children can be seriously injured or killed if furniture tips over.
Don’t use this item for a TV stand or place heavy objects on top of item.
Always use angle-braces or anchors to secure furniture to the wall.

THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER SHELF OR A TOTAL OF
100 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 20 POUNDS OR
100 POUNDS TOTAL WEIGHT. IF OVERLOADED WITH MORE THAN 20 POUNDS
PER SHELF OR 100 POUNDS TOTAL WEIGHT, SHELF MAY TIP FROM THE WALL
AND CAUSE SERIOUS INJURY OR DEATH.

1
2
3
4
4
5
6
7
10
11
9
8
Top Board
DESCRIPTION
Left Side Panel
Right Side Panel
Upper Front Cross Bar
Adjustable Shelf
Shelf
Rear Cross Bar
Bottom Board
Back Board
Door
Shelf
1PC
QTY
1PC
1PC
2PCS
1PC
1PC
1PC
1PC
1PC
1PC
1PC
NO
1
2
3
4
5
6
7
8
9
10
11

Wood Dowel (6 x 30mm)
Cam Bolt
Cam Lock
Shelf Holder
Hinge
Screw (4 x 12mm)
Screw (4 x 35mm)
Screw (4 x 30mm)
4PCS
26PCS
16PCS
16PCS
2PCS
8PCS
4PCS
2PCS
A
B
C
D
E
F
G
H
2PCS
I
J10PCS Screw (2.5 x 10mm)
Plastic Anchor
TOOLS NEEDED FOR ASSEMBLY : FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED)
THE USE POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY
DO NOT USE THIS ITEM IF ANY PARTS ARE MISSING OR DAMAGED
To order replacement parts at no cost to you,email [e-mail]
call 1-(844)-223-5201 or order parts online at www.riverridgehome.com
K2PCS Screw (4 x 12mm)
L2PCS Adjustable Anchor Bracket

STEP 1
1. Insert 6 cam bolts (A) into pre-threaded holes on left side panel (2).
2. Insert 6 cam bolts (A) into pre-threaded holes on right side panel (3).
1. Insert 4 cam bolts (A) into pre-threaded holes on top board (1).
2. Attached 2 brackets (L) to top board (1) by inserting 2 screws (K) through holes on brackets (L),
then tighten to top board (1).
1. Attach rear cross bar (7) to shelf (6) by inserting 2 screws (F) through holes on rear cross bar (7),
then tighten to shelf (6).
2. Insert 2 wood dowels (C) into wood dowel holes on upper front cross bar (4). Attach upper front
cross bar (4) to shelf (11) by inserting wood dowels into wood dowel holes on shelf (11). Insert
1 screw (F) through hole on upper front cross bar (4), then tighten the screw (F).
STEP 2
STEP 3
A
A
A
A
A
AA
AA
A
A
A
F
F
F
C
C
6
7
23
11
4
A
K
KL
L
A
A
A
1

1. Attach 2 hinges (E) to door (10) by inserting 4 screws (G) through holes on hinges (E), then
tighten to door (10).
1. Insert 9 wood dowels (C) into wood dowel holes on left side panel (2).
2. Attach upper front cross bars (4), shelf (6), rear cross bar (7), bottom board (8) and shelf (11)
to left side panel (2) by inserting wood dowels (C) into wood dowel holes and inserting cam bolts
(A) into cam lock holes on upper front cross bars (4), shelf (6), rear cross bar (7), bottom board
(8) and shelf (11).
3. Insert 6 cam locks (B) into cam lock holes on shelf (6), bottom board (8) and shelf (11), then
rotate clockwise to secure cam bolts (A) in place.
STEP 4
STEP 5
GG
E
10
GG
GG
E
E
CC
C
B
B
B
B
B
B
CC
C
CC
C
2
4
4
6
7
11
8

1. Insert 9 wood dowels (C) into wood dowel holes on right side panel (3).
2. Attach right side panel (3) to upper front cross bars (4), shelf (6), rear cross bar (7), bottom
board (8) and shelf (11) by inserting wood dowels (C) into wood dowel holes and inserting
cam bolts (A) into cam lock holes on upper front cross bars (4), shelf (6), rear cross bar (7),
bottom board (8) and shelf (11).
3. Insert 6 cam locks (B) into cam lock holes on shelf (6), bottom board (8) and shelf (11), then
rotate clockwise to secure cam bolts (A) in place.
1. Insert 6 wood dowels (C) into wood dowel holes on top board (1).
2. Attach top board (1) to left side panel (2), right side panel (3) and upper front cross bar (4) by
inserting wood dowels (C) into wood dowel holes and inserting cam bolts (A) into cam lock
holes on left side panel (2), right side panel (3) and upper front cross bar (4).
3. Insert 4 cam locks (B) into cam lock holes on left side panel (2) and rightside panel (3), then
rotate clockwise to secure cam bolts (A) in place.
4. Insert 2 screws (F) through holes on upper front cross bar (4), then tighten screw (F).
STEP 6
STEP 7
3
28
11
6
4
4
7
C
C
C
C
C
C
C
C
CB
B
B
B
B
B
C
C
C
C
C
C
F
F
BB
BB
1
2
3
4

1. Attach back board (9) to back of cabinet by inserting 10 screws (J) through holes on back
board (9) then tighten to cabinet.
1. Insert 4 shelf holders (D) into desired position.
2. Place adjustable shelf (5) onto 4 shelf holders (D), making sure all 4 shelf holders are at
same height.
STEP 8
STEP 9
D
D
D
D
D
5
J
J
J
JJ
JJ
J
JJ
9

1. Attach door (10) to cabinet by inserting 4 screws (G) through holes on hinges (E) then tighten to
right side panel (3).
2. Note: Tightening screw in position “a” will adjust door up or down; tightening screw in position
“b” will adjust door to or from cabinet and tightening screw in position “c” will adjust door side
to side.
G
G
G×2
G×2
b
a
a
bc
c
STEP 10
E
10

STEP 11
Important: Keep assembly instructions for future reference.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose
screws/parts. Take appropriate action necessary to correct hazards such as tightening
of screws and taking any damaged parts away from children.
CARE INSTRUCTIONS:
Wipe clean with a water dampened cloth. Wipe dry with clean cloth.
WARNING Please make sure your item is
secured to the wall, per assembly instructions.
Option #1: Securing to Drywall
1. Position cabinet against wall in desired location. Using a pencil, make 2 small marks on wall through holes
on brackets (L). Move cabinet away from wall and screw 2 plastic anchors (I) into wall on pencil marks.
2. Place cabinet against wall, insert 2 screws (H) through holes on metal brackets (L), then tighten to plastic
anchors (I).
Option #2: Securing to Drywall and Wood Stud
1. Position cabinet against wall in desired location. Insert 2 screws (H) through holes on metal brackets (L),
then tighten through drywall and into wood stud.
*Tip: Anchor brackets (L) can be adjusted to correct distance from wall to cabinet as needed. Once adjusted,
be sure to re-tighten brackets inside cabinet for stability.
H
H
I
I
I
H
H
DRYWALL
WALL ANCHOR
WITH SCREW
SCREW
ONLY
DRYWALL
OPTION #2OPTION #1
WOOD
STUD
H
I

Thank you for purchasing this RiverRidge ® Home item. We hope you
enjoy it and consider purchasing other RiverRidge® items.
To order replacement parts at no cost to you, email customer.service@ssi- rr.com,
call 1-(844)-223-5201or order parts online at www.riverridgehome.com
RiverRidge ® is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016
Enjoy your new RiverRidge® Cabinet!