Wine racks America Baker Style Kit User manual

Cordless Drill
*Please verify that you have the correct number of parts before proceeding.
Depending on the model you purchased, your bundle should contain the following:
Baker Style Kit
Assembly GUIDE or visit
wineracksamerica.com
Questions?
888.373.6057
Package Contents tools for assembly
Page 1
Vertical Leg Support
Horizontal trim piece
Horizontal bottle shelves
VERTICAL LEG SUPPORT (x4)
HORIZONTAL BOTTLE SHELF (x15)
HORIZONTAL TRIM PIECE (x4)
Screwdriver
(x68)

ATTACHING YOUR RACK TO THE WALL
ATTACHING YOUR RACK TO THE WALL
Baker Style Kit
Assembly GUIDE or visit
wineracksamerica.com
Questions?
888.373.6057
Page 2
* Minimize the risk of splitting your ladders by drilling a 1/16" pilot hole before driving the wood screws.
For best results, drive the screw most of the way in with your drill, then finish tightening by hand.
Depending on how many bottles you store, your wine cellar rack could weigh as much as 540 lbs.
To avoid tipping attach your racking to the wall using one of the following methods.
1. Put the rack in the desired location.
2. Shim the front of the rack so it is
parallel with the wall behind it.
3. Locate a wall stud behind the rack.
4. Drive a 2 1/2" wood screw through a
back spacer bar to attach to the stud.
1. Use "L" brackets (located at any hardware store).
2. Attach to both the rack and the wall in any out of
the way spot.
Baker Baker/Case