Rize 1000004 User manual

1000004 Queen/King/California King
Bed Frame Assembly Instructions
Instructions
See King size on next page.
Parts Included
• Bed Frame Rails - 2
•Stem Glides - 6
• Sockets - 6
• End Caps - 2
• Center Rail - 1
• Bolts - 4
• Nuts - 4
• Cross Rails - 4
• Plug Locks - 4
Slide leg covers on bed frame rails over inner legs on cross rails.
Leg Cover
Bed Frame Rail
Cross Rail
Find the keyholes on the cross arms needed for the appropriate size bed. See images below.
For Queen Size Beds
For California King Size Beds
12 Insert 6plastic sockets into legs on cross
rails and side rails . Insert glides into plastic
sockets.
3
Leg Socket
◄

Copyright 2019 Rize. Rev 9/12/2019
www.rizebeds.com / 1-844-545-8865 / [e-mail]
Insert rivets on extender rail into selected keyholes. Slide arms away from each other to lock the position. Then insert
plug lock into keyhole at the end of the overlap. Repeat on the other side of the bed.
Position the center rail in the middle of the bed
frame. Secure each end of center rail to the
extender rail with boltsand nuts. Center rail can
be used for all sizes.
Step 3 continued
Plug Lock
Slide end caps over the foot end of the side rails. The
caps are designed so each one fits one side rail, the
right side or the left side.
For King Size Beds
4 5