Rize I-126Q User manual

1 2
All frames include:
(2) Side Rails
(2) End Caps
(2) Screws
(2) Thumb Nuts
(1) Center Rail
Insta-Lock Bed Frame Assembly Instructions
Use with models:I-126Q, I-115PR, I-416QPG, I-414PR
Foot parts for I-126Q & I-416QPG
(5) Glides
Foot parts for I-115PR & I-414PR
(4) Plastic Sockets
(4) Rollers
(1) Glide
Parts included:
3
3
Find the keyholes on the cross rails needed for the appropriate size bed. Insert rivets on the other cross rail into
the selected keyholes. Slide arms away from each other to lock the position. Repeat on the other side of the bed.
Set side rails out with the headboard brackets
on the same end. Swing out cross rails from
the side rails to a 90° angle.
Install the glides OR the sockets & rollers on the
legs, including the leg on the center rail.
Plastic
Glide
Roller
◄
◄
◄
Socket
End Cap
Queen
Full
Twin
End Cap
Keyhole
Rivets
4If you are using this frame for a Full or Queen size bed,
attach the center rail to the side rails. Line up the hole at
the end of the center rail under the hole in the middle
of the side rails. Secure with a screw and thumb nut.
Slip the end caps over the foot ends of the side
rails (opposite the headboard brackets).
5
Screw
Thumb Nut Queen
Full
www.rizebeds.com | 1-844-545-8865 | [e-mail] Copyright Rize 10/25/2019
Headboard
Bracket