roblight FL 1100 User manual

Control m anual for FL 1100
(D M X m o d e l)
DMX installation

You can order a custom addressing (part num ber 9903 0071) of the unit
when ordering the light generators. The light generators will be supplied
with a label informing about the settings.
Factory default setting:
Factory custom set up addresses:
Factory default Address settings are as follow s:
Electronically setting:
CH1 dim m ing 0-100%
CH2 Dim m ing 16 bit (High resolution 65536 levels).
Mecannically setup directly on the hardware inside the unit:
CH3 DMX addressable special functions.
CH4 Colour w heel.
CH5 Tw inkle w heel.

Setting up addressing on site.
Please note that the follow ing steps requires a skilled technician. And that
working on a light generator with requires a trained electrican.
Use caution!
On www.eldoled.com /software download software for eldoLED
TOOLbox pro:
eldoLED FluxTool softw are v1.04 W IN.zip
eldoLED FluxTool softw are v1.04 M AC.zip
eldoLED Show m aster DM X softw are v 1.5.zip
Dow nload and follow user m anuals in: User m anuals/Accessories/User Ma-
nual TO O Lbox PC Softw are v1.0.pdf. Connect TO O Lbox and follow eldoLED
manual.
According to DM X protocol driver address should be set to light generator
desired DM X address. Driver:
Channel 1: Dim m ing 0-100% light
Channel 2: Dim m ing. Fine resolution, 16 bit (LSB: Least Significant Bit).
(O n e D M X c h a n n e l re p re se n ts a n u m b e r fro m 0 to 2 5 5 w h ic h is a 8 b its n u m -
ber. In order to have m ore than 256 DM X steps, tw o channels can be com bi-
ned (256 tim es 256). This is called 16 bits resolution)

Wheel control board code on driver. Wheel must be set to driver DMX
address +2.
Exam ple:
DMX address 1 on driver -
wheel sets to address 3
DMX address 8 on driver - wheel sets to address 10.
When the light generator is addressed replace the sealing
Connect TOOLbox as show n and follow eldoLED m anual.
X1 x10 x100

DMX protocol
(F a c to ry d e fa u lt a d d re ss se ttin g )

Part nam e Description Ordrering
DMX cable 2.5 m XLR plugs 9903 0056
DMX cable 5 m XLR plugs 9903 0052
DMX cable 10 m XLR plugs 9903 0057
DMX cable 11 to 50 m XLR
plugs 9903 0058
DMX cable 51 to 100 m XLR
plugs 9903 0059
DMX 512 Sunlite control unit
USB 0160 0302
Netdel 100-240VAC / 5VDC 6708 0002
Starter kit D M X Cabels,
TOOLbox,Sunlite 0126 8300
Factory DM X addressing 9903 0071
DMX control unit program -
ming per hour 9903 0070
If p r o b le m s is n o t s o lv e d u s in g t h is g u id e p le a s e c o n t a c t R o b lig h t A /S
Accessories/spare parts
RobLight accepts no responsibility for possible errors in catalogues, brochures and other printed m aterial.
RobLight reserves the right to alter or discontinue its products w ithout notice. © 2019 RobLight A/S
RobLight A/S, Nordhavnsvej 1A, DK-9900 Frederikshavn
T: [phone], E: info@ rob-lig h t.c o m
www.rob-lig h t.c o m
99082179, 18-05-2021, Rev. 1.0