Robustel R1511 User manual

Robustel R1511 Hardware Manual
RT061_HM_R1511 1/10
R1511
Hardware Manual
Version: 1.0.0
Date: July 6, 2022

Robustel R1511 Hardware Manual
RT061_HM_R1511 2/10
Regulatory and Type Approval Information
Table 1: Directives
2011/65/EU
The European RoHS2.0 2011/65/EU Directive was issued by the European parliament
and the European Council on 1 July 2011 on the restriction of the use of certain
Hazardous substances in electrical and electronic equipment.
On June 4, 2015, the Official Journal of the European Union published the RoHS2.0 Amendment
Directive (EU)
In 2015/863, four phthalates (DEHP, BBP, DBP, DIBP) were officially included in the list of restricted
substances in Appendix II of RoHS 2.0 (2011/65/EU).
From July 22, 2019, all electronic and electrical products exported to Europe (except medical and
monitoring equipment) must meet this restriction; from July 22, 2021, medical equipment and
monitoring equipment will also be included in the scope of control.
2012/19/EU
The European WEEE 2012/19/EU Directive was issued by the European parliament
and the European Council on 24 July 2012 on waste electrical and electronic equipment.
2013/56/EU
The European 2013/56/EU Directive is a battery Directive which published in the EU official gazette
on 10 December 2013. The button battery used in this product conforms to the standard of
2013/56/EU directive.
Table 2: Toxic or Hazardous Substances or Elements with Defined Concentration Limits
Name of
the Part
Hazardous Substances
(Pb)
(Hg)
(Cd)
(Cr(VI))
(PBB)
(PBDE)
(DEHP)
(BBP)
(DBP)
(DIBP)
Metal
parts
o
o
o
o
-
-
-
-
-
-
Circuit
modules
o
o
o
o
o
o
o
o
o
o
Cables
and cable
assemblie
s
o
o
o
o
o
o
o
o
o
o
Plastic
and
polymeric
parts
o
o
o
o
o
o
o
o
o
o

Robustel R1511 Hardware Manual
RT061_HM_R1511 3/10
Radio Specifications
RF technologies
2G, 3G, 4G, Wi-Fi
Cellular Frequency*
2G: GSM: B3/B8
3G: WCDMA: B1/B8
4G: LTE FDD: B1/B3/B7/B8/B20/B28A
LTE TDD: B38/B40/B41
Max RF power
33dBm±2dB@GSM, 24dBm+1/-3dB@WCDMA, 23±2dBdBm@LTE
*May vary on difference models.
Simplified EU Declaration of Conformity
We, Guangzhou Robustel Co., Ltd. are located at 501, Building #2, 63 Yongan Road, Huangpu District, Guangzhou,
China, declare that this radio equipment complies with all applicable EU directives. The full text of the EU DoC is
available at the following internet address:
www.robustel.com/certifications/
FCC Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
IC Declaration of Conformity
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1)This device may not cause interference.
(2)This device must accept any interference, including interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation,
Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes :
(1) L' appareil ne doit pas produire de brouillage;
(2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d' en
compromettre le fonctionnement.
Radio Frequency Exposure Statement for IC
This device complies with IC exposure limits set forth for an uncontrolled environment. This device shall be installed
and operated with minimum distance 20cm between the radiator & body.
o:
Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is
below the limit requirement in RoHS2.0.
X:
Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials for this
part might exceed the limit requirement in RoHS2.0.
-:
Indicates that it does not contain the toxic or hazardous substance.

Robustel R1511 Hardware Manual
RT061_HM_R1511 4/10
Cet équipement est conforme aux limites d'exposition IC définies pour un environnement non contrôlé. Cet
équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et la carrosserie.
Related download link
Find more product documents or tools at:
www.robustel.com/en/documentations/
Technical Support
Tel: [phone]
Email: [e-mail]
Web: www.robustel.com
Document History
Updates between document versions are cumulative. Therefore, the latest document version contains all updates
made to previous versions.
Date
Firmware Version
Document Version
Change Description
July 6, 2022
5.0.0
1.0.0
Initial release.

Robustel R1511 Hardware Manual
RT061_HM_R1511 5/10
Overview
Robustel R1511 industrial-grade cellular VPN wireless router supports GSM 2G network, WCDMA 3G network, LTE
4G network to provide high-speed wireless network bandwidth for devices through wireless connection.
Package Checklist
Before commencing installation ensure your package has the following components:
Device
2PIN Terminal
Block
3PIN Terminal
Block
Wi-Fi Antenna
Cellular Antenna
Sim Card Sticker
Power Supply
(Optional)
Wall Mounting Kit
(Optional)
DIN rail
Mounting Kit
(Optional)
Note: the accessories could be different on specific order.
Panel Layout(May vary on difference models)

Robustel R1511 Hardware Manual
RT061_HM_R1511 6/10
Interface Descriptions
1. PIN Description
PIN
Description
Note
1
V+
Power Supply Positive
1 2
Note:
1) The input voltage is 9 to 36V DC (Without ignition
sensing)
2
V-
Power Supply Negative
3
RXD/B
RS232 Data Receive/RS485_B, may vary on different model.
345
4
GND
Signal Ground
5
TXD/A
RS232 Data Transmission/RS485_A, may vary on different
model.
2. LED Indicator.
Name
Color
Status
Description
RUN
Green
On, solid
Router is powered on (System is initializing)
On, blinking
Router starts operating
Off
Router is powered off
MDM
Green
On, solid
Link connection is working
On, blinking
Data is sent and received.
Off
Link connection is not working
USR
USR-OpenVPN
Green
On, solid
OpenVPN connection is established
Off
OpenVPN connection is not established
USR-IPsec
Green
On, solid
IPsec connection is established
Off
IPsec connection is not established
RSSI
Green
On, solid
Signal Level: Best Signal Level
Wireless module: 21-31dB (signal strength)
Green
On, slow blinking (1s)
Signal Level: Average Signal Level
Wireless module: 11-20dB (signal moderate)
On, fast blinking
Signal Level: Abnormal Signal Level
Wireless module: 21-31dB (signal weak)
Green
Off
No signal
WLAN
Green
On, solid
Wi-Fi is enabled and working properly
Green
Off
Wi-Fi is disabled or not working properly
Note: You can choose the display type of USR LED. For more details, please refer to
RT123_SM_RobustOS Software Manual, Services > Advanced > System >System Settings > User LED Type.

Robustel R1511 Hardware Manual
RT061_HM_R1511 7/10
3. Reset Button.
Function
Operation
Reboot
Press and hold the RST button for 2~ 5 seconds under the operating status.
Restore to default
configuration
Press and hold the RST button for 5~10 seconds, the RUN LED starts blinking quickly, the router will restore to default
configuration.
Restore to factory
default settings
Once the operation of restoring default configuration is performed twice within one minute, the router will restore to factory
default settings.
Note: The more details please refer to RT123_SM_RobustOS Software Manual, 2.3 Factory Reset.
4. Ethernet Ports. There are two Ethernet ports on R1511, including ETH0 (WAN/LAN), and ETH1. Each has two
LED indicators. The green one is a link indicator but the yellow one doesn’t mean anything (always off). For
details about status, see the table below.
Ethernet LED Indicator
Status
Description
Link indicator
(Green)
On, solid
Connection is established
On, blinking
Data is being transferred
Off
Connection is not established

Robustel R1511 Hardware Manual
RT061_HM_R1511 8/10
Hardware Installation
1. SIM Card Installation. Insert the SIM cards into the device, then stick the sticker.
2. Antenna Installation. Rotate the antenna into the antenna connector accordingly.
3. Terminal Block Installation. Insert the 2PIN, 3PIN terminal blocks into the interfaces connector.
4. Mounting Kit installation.
1Wall mounting

Robustel R1511 Hardware Manual
RT061_HM_R1511 9/10
2DIN rail mounting
5. Connect the Router to a Computer
Connect a standard Ethernet cable to the port marked ETH0~ETH1 at the front of the R1511 Router, and connect
the other end of the cable to your computer.
6. Power Supply installation. There are two cables associated with the power adapter. Following to the color of
the head, connect the cable marked red to the positive pole through a terminal block, and connect the yellow
one to the negative in the same way.
Note: The range of power voltage is 9 to 36V DC.

Robustel R1511 Hardware Manual
RT061_HM_R1511 10/10
Login to the Device
1. Connect the router’s Ethernet port to a PC with a
standard Ethernet cable.
2. Before logging in, manually configure the PC with
a static IP address on the same subnet as the
gateway address, click and configure "Use the
following IP address".
3. To enter the gateway's web interface, type
http://192.168.0.1 into the URL field of your
Internet browser.
4. Use login information shown in the product label
when prompted for authentication.
5. After logging in, the home page of the web
interface is displayed, then you can view system
information and perform configuration on the
device.
6. The automatic APN selection is ON by default, if
need to specify your own APN, please go to the
menu Interface->Link Manager->Link
Setting->WWAN Settings to finish the specific
setting.
7. The more configuration details please refer to
RT123_SM_RobustOS Software Manual.
(END)
Support: [e-mail]
Website: www.robustel.com
©2022 Guangzhou Robustel Co., Ltd.
All rights reserved. Subject to change without notice.