Rohnson R-2818 User manual

INSTRUCTION MANUAL
AIR FRYER
MODEL: R-2818
Read this manual thoroughly before using and save it for future reference

1
IMPORTANT SAFEGUARDS
Before using the electrical appliance, the following basic precautions should always be
followed including the following:
1. Read all instructions.
2. Before using check that the voltage of wall outlet corresponds to the one shown on the
rating plate.
3. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest
authorized service facility for examination, repair or electrical or mechanical adjustment.
4. If the supply cord is damaged it must be replaced by the manufacturer or an authorized
service agent or a qualified technician in order to avoid a hazard.
5. The use of accessory not recommended by the manufacturer may cause injuries to
persons.
6. Do not touch the hot surface. Use the handle or the button.
7. Do not use the appliance for other than intended use.
8. Cooking appliances should be positioned in a stable situation with the handles (if any)
positioned to avoid spillage of the hot liquids.
9. Do not let the cord hang over the edge of a table or counter or touch a hot surface.
10. Do not place on or near a hot gas or electric burner or in a heated oven.
11. Extreme caution must be used when moving fryer containing hot oil.
12. Do not leave the appliance unattended when it is being operated.
13. Children should be supervised to ensure that they do not play with the appliance.
14. The appliance must not be immersed.
15. Unplug from outlet when not in use and before cleaning. Allow to cool down before
putting on or taking off parts, and before cleaning the appliance.
16. Use special gloves when moving the appliance
17. Make sure handles are properly assembled to basket and locked in place. See detailed
assembly instructions.
18. Before use, always ensure that the oil tank is positioned correctly.
19. Never connect the fryer to the electricity supply without placing oil in the oil tank first.
20. The oil in the oil tank will be still hot after it is switched off. Never attempt to move
your fryer until it is completely cool down, lift the oil tank use the handles.
21. Though the detachable oil tank can be completely immersed in water and clean, it must

2
be thoroughly dried before next use to prevent electric shock.
22. To prevent fire, do not place the appliance close to flammable materials such as curtains,
and do not place anything above the appliance.
23. Make sure all papers, cardboard or plastic have been removed before frying food.
24. The appliance can not be used for storing things, especially papers, cardboard or plastic.
25. Always disconnect the appliance from the supply before close the appliance.
26. The appliances are not intended to be operated by means of an external timer or
separate remote-control system.
27. On completion of frying and before opening the lid, always raise the basket and wait a
few seconds to allow steam pressure to subside.
28. This appliance shall not be used by children from 0 year to 8 years. This appliance can
be used by children aged from 8 years and above if they are continuously supervised. This
appliance can be used by people with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved. Keep
the appliance and its cord out of reach of children aged less than 8 years. Cleaning and user
maintenance shall not be made by children.
29. This appliance is intended to be used in household and similar applications such as:
–staff kitchen areas in shops, offices and other working environments
–farmhouses
–by clients in hotels, motels and other residential type environments
–bed and breakfast type environments
30. Save these instructions.

3
KNOW YOUR AIR FRYER
Control panel
Top lid
Upper housing
Lower housing
Wire rack
Frying tank
CONTROL PANEL

4
INTRODUCTION FOR OPERATING MODES
The appliance has two operating modes including “Default mode”and “Custom mode”.
1. Default mode
Connect the appliance with power source, press the Power button “ ” and the appliance
enters into the “Default mode”, then press the Menu button “ ” to select your desired
menu, and the icon of selected menu will be lighted up, then press the Start/Stop button
“ ” and the appliance starts working according to the selected menu.
2. Custom mode
Connect the appliance with power source, press the Power button “ ” and press the Menu
button “ ” to select your desired menu. Then press Temperature/Time button “ ”, when
the display indicates “ ”, press “ ” or “ ” to adjust the temperature. After
finish setting temperature, press Temperature/Time button “ ” again to enter into the
time-setting mode, then press “ ” or “ ” to adjust the time. After finish setting time,
press the Start/Stop button “ ” and the appliance starts working according to the selected
menu with new temperature and time.
3.Food flipping
To assure even cooking/browning, open the frying basket drawer halfway through the
cooking time. Check, turn or vigorously shake foods in the frying basket.
IMPORTANT: When you take the inner pot out of the air fryer, the machine is in power off
state, reload the inner pot in 10 minutes the machine continues to work .

5
INTRODUCTION FOR MENUS
Ingredient
Default
temperature
Suggested
cook time
Shake
Remark
Frozen French
fries
200℃
15-20mins
Shake
Adjustable time: 1-60mins
Chop
200℃
15-20mins
Shake
Adjustable time: 1-60mins
Bake
180℃
30mins
Adjustable time: 1-60mins
Chicken leg,
chicken wing
200℃
25-40mins
Shake
Adjustable time: 1-60mins
Fish
200℃
12mins
Shake
Adjustable time: 1-60mins
Beefsteak
200℃
25mins
Shake
Adjustable time: 1-60mins
Dry fruit
30℃(Adjustable
temperatures:30-80℃)
4 hours
Adjustable time: 2-24
hours
Shrimp
180℃
12-15mins
Shake
Adjustable time: 1-60mins
USING FOR THE FIRST TIME
1. Before using the appliance for the first time, remove all the packaging materials, labels
and/or stickers from the appliance.
2. Remove all the detachable parts and wash them in soapy water, and then rinse them with
clean water and dry them with a clean cloth or paper towel.
3. Assemble all the parts of the appliance well in position and place the appliance on a
suitable position. Do not put the appliance in the closet or at a place which is close to the
wall.
4. Connect the appliance with power source. When the appliance is used for the first time,
odor or smoke will occur, which is caused by the protective film on the heating element.
This is normal. So it is recommended that the appliance should work without load for about
15 minutes remove the odor. Please open the door and window and make the room be
ventilated when the appliance is used for the first time.

6
OPERATION INSTRUCTION
NOTE: Make sure all the packaging materials are removed before adding food. The frozen
food needs to be preheated. And please immediately cook the food which has been
defrosted.
French fries
1. Connect the appliance with power source. Press the Power button “ ” and then press
Menu button “ ” to select the “French fries”“ ”, and the default temperature and time
of “French fries”setting are 200℃and 20 minutes separately, which are indicated in the
display. And you can adjust your desired temperature and time by following the operation
specified in the section of “Custom mode”, and the display will indicate the new
temperature and time.
2. Put the wire rack into the frying tank and then add 500g frozen French fries on the wire
rack.
3. Install the frying tank well in position and then press the Start/Stop button “ ”, then the
appliance starts to work.
4. When the appliance finishes working, five beeps can be heard, and the food are fried
well.
Chop
1. Connect the appliance with power source. Press the Power button “ ” and then press
Menu button “ ” to select the “Chop”“ ”, and the default temperature and time of
“Chop”setting are 200℃and 15 minutes separately, which are indicated in the display.
And you can adjust your desired temperature and time by following the operation specified
in the section of “Custom mode”, and the display will indicate the new temperature and
time.
2. Put the wire rack into the frying tank and then evenly add a layer of chops on the wire
rack.
3. Install the frying tank well in position and then press the Start/Stop button “ ”, then the
appliance starts to work.
4. When the appliance finishes working, five beeps can be heard, and the food are fried
well.
Bake
1. Connect the appliance with power source. Press the Power button “ ” and then press

7
Menu button “ ” to select the “Bake”“ ”, and the default temperature and time of
“Bake”setting are 180℃and 30 minutes separately, which are indicated in the display.
And you can adjust your desired temperature and time by following the operation specified
in the section of “Custom mode”, and the display will indicate the new temperature and
time.
2. Put the wire rack into the frying tank and then add appropriate amount of food on the
wire rack.
3. Install the frying tank well in position and then press the Start/Stop button “ ”, then the
appliance starts to work.
4. When the appliance finishes working, five beeps can be heard, and the food are fried
well.
Chicken leg, chicken wing
1. Connect the appliance with power source. Press the Power button “ ” and then press
Menu button “ ” to select the “Chicken leg, chicken wing” “ ”, and the default
temperature and time of “Chicken leg, chicken wing” setting are 200℃and 20 minutes
separately, which are indicated in the display. And you can adjust your desired temperature
and time by following the operation specified in the section of “Custom mode”, and the
display will indicate the new temperature and time.
2. Put the wire rack into the frying tank and then evenly add a layer of chicken legs or
chicken wings on the wire rack.
3. Install the frying tank well in position and then press the Start/Stop button “ ”, then the
appliance starts to work.
4. When the appliance finishes working, five beeps can be heard, and the food are fried
well.
NOTES:
(1) Please pay attention to the food to avoid it being scorched during working process, and
it is necessary apply some seasonings on the food at the end of the work.
(2) Be careful when removing food after the food is cooked well. Use special gloves to
prevent being burnt.
Fish
1. Connect the appliance with power source. Press the Power button “ ” and then press
Menu button “ ” to select the “Fish”“ ”, and the default temperature and time of
“Fish”setting are 200℃and 12 minutes separately, which are indicated in the display. And

8
you can adjust your desired temperature and time by following the operation specified in
the section of “Custom mode”, and the display will indicate the new temperature and time.
2. Put the wire rack into the frying tank and then evenly add a layer of fishes on the wire
rack.
3. Install the frying tank well in position and then press the Start/Stop button “ ”, then the
appliance starts to work.
4. When the appliance finishes working, five beeps can be heard, and the food are fried
well.
Beefsteak
1. Connect the appliance with power source. Press the Power button “ ” and then press
Menu button “ ” to select the “Beefsteak”“ ”, and the default temperature and time of
“Beefsteak”setting are 200℃and 25 minutes separately, which are indicated in the display.
And you can adjust your desired temperature and time by following the operation specified
in the section of “Custom mode”, and the display will indicate the new temperature and
time.
2. Put the wire rack into the frying tank and then evenly add a layer of beefsteaks on the
wire rack.
3. Install the frying tank well in position and then press the Start/Stop button “ ”, then the
appliance starts to work.
4. When the appliance finishes working, five beeps can be heard, and the food are fried
well.
Dry fruit
1. Connect the appliance with power source. Press the Power button “ ” and then press
Menu button “ ” to select the “Dry fruit”“ ”, and the default temperature and time of
“Dry fruit”setting are 30℃and 4 hours separately, which are indicated in the display. And
you can adjust your desired temperature and time by following the operation specified in
the section of “Custom mode”, and the display will indicate the new temperature and time.
2. Put the wire rack into the frying tank and then evenly add a layer of fruits which have
been cut well and are of uniform thickness on the wire rack.
3. Install the frying tank well in position and then press the Start/Stop button “ ”, then the
appliance starts to work.
4. When the appliance finishes working, five beeps can be heard, and the food are fried
well.

9
Shrimp
1. Connect the appliance with power source. Press the Power button “ ” and then press
Menu button “ ” to select the “Shrimp”“ ”, and the default temperature and time of
“Shrimp”setting are 180℃and 12 minutes separately, which are indicated in the display.
And you can adjust your desired temperature and time by following the operation specified
in the section of “Custom mode”, and the display will indicate the new temperature and
time.
2. Put the wire rack into the frying tank and then evenly add a layer of shrimps on the wire
rack.
3. Install the frying tank well in position and then press the Start/Stop button “ ”, then the
appliance starts to work.
4. When the appliance finishes working, five beeps can be heard, and the food are fried
well.
CLEANING AND MAINTENANCE
1. Unplug the appliance and allow it to cool down thoroughly before cleaning. Clean all
accessories such as wire rack and frying tank by hot water with detergent.
2. Immerse the wire rack and frying tank into the water for cleaning thoroughly. Do not use
a abrasive cleaning tool to clean, otherwise, the non-stick and plating coating on the surface
will easily fall off.
3. Clean the inner wall of the appliance regularly. Gently wipe off the oil with a warm
cotton cloth, then dry it with a dry cloth.
4. Never immerse the appliance into water for cleaning.
5. Do not clean the frying tank with any metal tool to avoid its surface coating being
damaged.

10
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT
IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection centre or to a
dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for
the environment and health, deriving form inappropriate disposal and enables the
constituent materials to be recovered to obtain significant savings in energy and resources.
As a reminder of the need to dispose of household appliances separately, the product is
marked with a crossed-out wheeled dustbin.
Table of contents
Other Rohnson Fryer manuals

Rohnson
Rohnson R-2827 User manual

Rohnson
Rohnson R-2817 User manual

Rohnson
Rohnson R-2846 User manual

Rohnson
Rohnson R-2828 User manual

Rohnson
Rohnson R-2823 User manual

Rohnson
Rohnson R-2836 User manual

Rohnson
Rohnson R-2857 User manual

Rohnson
Rohnson R-2843 User manual

Rohnson
Rohnson R-2832 Quick guide

Rohnson
Rohnson Smartchef R-2838 User manual
Popular Fryer manuals by other brands

cecotec
cecotec CECOFRY EXPERIENCE WINDOW WHITE 6000 instruction manual

Buffalo
Buffalo DC319-P Assembly, installation and operation instructions

Nordcap
Nordcap ZANUSSI 2B5LT EF7 / 2B5LT user manual

Frymaster
Frymaster BIH1721 Series Installation & operation manual

Black & Decker
Black & Decker BXAF5500E instructions

Gourmia
Gourmia GTF7950MEX user manual