Roller Pro Rider E-Bike User manual

USER
MANUAL
E·BIKE
RP·RIDER
RIDER

IMPORTANT
WELCOME
TABLE OF CONTENTS
NON-COMPLIANCE WITH SAFETY INSTRUCTIONS COULD CAUSE SERIOUS BODY DAMAGE
AND IN EXTREME CASES, DEATH.
Thank you for your purchase of the Roller-Pro Rider E-Bike
The Roller-Pro Rider E-Bike takes the power of electricity, the style of a traditional Bike, adds them
together, and tops it off with a bit of swag.
To ensure your safety and the safety of others, please read and follow the guidelines in this user
manual carefully and thoroughly before and during riding.
If you have any questions regarding the Roller-Pro Rider E-Bike, contact us on atencionalcli-
[email protected]
IMPORTANT ------------------------------------------------------------------ 1
WELCOME -------------------------------------------------------------------- 1
GENERAL INFORMATION ------------------------------------------------ 2
IMPORTANT INFORMATION -------------------------------------------- 2
SPECIFICATIONS ----------------------------------------------------------- 4
PARTS OF THE ROLLER-PRO RIDER E-BIKE --------------------- 5
DESCRIPTION OF THE FUNCTIONS --------------------------------- 5
FOLDING YOUR E-BIKE -------------------------------------------------- 6
CHARGING THE BATTERY ---------------------------------------------- 7
RIDING YOUR E-BIKE ----------------------------------------------------- 8
PRACTICING GUIDELINES ---------------------------------------------- 8
MAINTENANCE -------------------------------------------------------------- 9
DECLARATION OF CONFORMITY ------------------------------------- 10
1

Before operating this vehicle, please read all instructions. This manual will guide you through the
functions, usage, and proper care of your Roller-Pro Rider E-Bike. If you have any questions or
cannot find the information you need in the manual, please contact your place of purchase or our
customer service center. Before contacting customer service, please have your purchase informa-
tion ready as this may be needed during the call. This information may be recorded below.
Notes with this icon MUST be read, understood, and obeyed to Prevent injury or damage,etc.
Notes with this icon include relevant information.
Properly dispose of all packaging material. Some items may be packed in plastic bags or other
material and may cause suffocation or injury to pets or children.
Keep the packaging in a safe place in case it needs to be used later for transportation.
Verify that all parts of the product are available. If any part is missing, contact Roller-Pro
customer service center. If any ports or cables or surrounding parts are damaged, do not use
the product.
Always use the original accessories supplied. Charge your Rider E-Bike using the included
charger. The use of a different one could cause failures in the product and invalidate its
warranty.
Always use appropriate clothing when riding the Rider E-Bike. In order to avoid any injury, it is
always recommendable to use knee pads, elbow pads, gloves.
Do not use the product if your weight less than 20Kg or exceed 120 Kg.
Do not attempt to open or modify your Rider E-Bike as doing so will void the manufacturer´s
warranty and could lead to serious injuries or death.
Do not use your Rider E-Bike in situations or places where you can cause danger or an
accident to people around you.
Never ride your Rider E-Bike under the influence of drugs or alcohol. Do not ride in case you
are tired.
Within this manual, “the Roller-Pro Rider E-Bike”, “your Roller-Pro Rider E-Bike”, “your E-Bike” and
“the E-Bike” refer to the Roller-Pro Rider E-Bike. The Roller-Pro Rider E-Bike is a personal bike that
uses electrical power. By riding the Roller-Pro Rider E-Bike, the user acknowledges and accepts
responsibility for all risks associated with the use of the electric bike which may include, but are not
limited to, muscle injuries, broken bones, lacerations, serious injury, and possible death, which may
be sustained while using the Roller-Pro Rider E-Bike.
To better ensure your safety, ALWAYS USE APPROPRIATE PROTECTIVE GEAR, read and follow
all instructions and warnings in the User Manual.
Appropriate protective gear should always be worn at all times
Use the Roller-Pro Rider E-Bike at your own risk. ROLLER-PRO shall not be held responsible
for accidents due to poor judgment.
It is important that you follow all safety warnings that appear throughout this manual and
exercise good judgment when using your Roller-Pro Rider E- Bike. Consult this manual
before attempting to ride.
GENERAL INFORMATION
IMPORTANT INFORMATION
Safety Warnings
When reading this manual, note these icons:
2

Do not ride your Rider E-Bike in ramps, curbs, slopes, slippery surfaces or try to perform
acrobatics or tricks. This can cause serious injuries.
Always use your Rider E-Bike in a smooth way. Do not be aggressive as this can cause failure
or an accident.
Do not use your Rider E-Bike in wet areas where water is present, muddy places, sandy places
or stony roads.
Do not ride your Rider E-Bike during bad or stormy weather. Example: Rain, snow, hail, frost,
fog, extreme heat.
Never insert objects into the product other than the cables etc. as described in this manual.
Be very careful when allowing children or elderly people use the product. These people may not
have the physical abilities necessary to drive safely.
Respect always all the traffic signals and make sure you observe the direction in which you are
riding your Rider E-Bike. Always be careful of pedestrians or nearby people and objects.
Do not ride your Rider E-Bike while talking on the phone, writing a message or conversing with
someone. This could cause an accident.
Do not ride your Rider E-Bike on highways, bicycle lane, bus lane, near cars. It is important you
check the local laws before starting to use your E-Bikes.
If the product is to be used by children, the caregiver should explain the contents of the user
manual to the children. The caregiver should provide adequate supervision to ensure that the
device is being used as explained in the user manual.
Risk of shock! Do not allow water and/or liquids to come in contact with any part of the product.
Use dry, non-abrasive cloth to remove debris or dust. Do not spray liquids onto the product.
Never submerge the product or any of the product’s components and/or accessories into water.
Do not ride over stairs.
Do not allow more than one person on your E-Bike at a time. Do not jump on the E-Bike.
People with a lack of balance or pregnant should not use this product.
Be very careful when allowing children or elderly people use the product. These people may not
have the necessary Physical abilities to drive safely.
Always calculate the distance required for braking. The Rider E-Bike employs an electronic
brake which reacts gradually. Therefore, it is extremely important to apply the brakes on time in
order to avoid any collision.
Do not ride your Rider E-Bike in dark areas where there is no light.
Do not place your feet in any other area besides the inferior base where you are supposed to
have them.
Always avoid riding through potholes or stony roads as this will deteriorate the E-Bike parts and
will cause failures.
The product shall only be used as described in this manual.
When not in use, cover the E-Bike to protect it from dust. Do not store it in a dusty environment,
humid, as this may cause damage over time.
WARNING- RISK OF FIRE - No user serviceable parts.
IMPORTANT:
YOU MUST COMPLY WITH ALL LOCAL LAWS AND / OR STATES OF YOUR REGION / COUN-
TRY ON THE USE OF THIS TYPE OF DEVICE
3

Disposal at End-of-Life
This product must not be disposed of by incineration, landfilling, or mixing with household trash.
Improper disposal of the battery contained within this product may result in the battery heating up,
rupturing, or igniting which may cause serious injuries. The substances contained inside the battery
present chemical risks to the environment. The recommended disposal for ROLLER-PRO®,
Roller-Pro Rider E-Bike at its end-of-life is to dispose of the entire unit at or through an e-waste
recycling center, program, or facility. Local regulations and laws pertaining to the recycling and
disposal of lithium-ion batteries and/or products containing them will vary according to country,
state, and local governments. You must check laws and regulations corresponding to where you live
in order to dispose of the battery and/or unit properly. It is the user’s responsibility to dispose of their
waste equipment properly in accordance with local regulations and laws.
For additional information about where you should drop off your batteries and electrical or electronic
waste, please contact your local or regional waste management office, your household waste
disposal service, or your point-of-sale.
SPECIFICATIONS
Parameter Description
Material
Colour
Max. range
Top speed
Weight (net)
Max. load
Battery
Display
Tyre
Brake
Dimensions (ready to drive)
Dimensions (folded)
Input voltage
Output voltage
Charging time
Power
Type
Range
Max. Incline
Working temperature
Storage temperature
Iron
Black/Blue
20 km
25 km/h based on terrain
15 kg
120 kg
4.0Ah / 6.0Ah (Lithium ion battery) 36V
LED
Front 12" / Rear 12"
Rear disc brake
900 x 945 x 480 mm
900 x 650 x 200 mm
AC: 110-240V – 50/60 Hz. 3.0Ah
DC 42V 2.0Ah
3 - 4 Hours
350 W
Brushless
12 /15 Km. (4.0 Ah) 15 /20 Km. (6.0 Ah)
15º
0 – 40ºC
-10ºC – 45ºC
These figures may vary depending on the speed, the person's weight and the unit's load (typical
range: maximum load, 75 kg load, 25ºC and 60% maximum average speed on a flat surface)
4