Rompa Cube Tube User manual

1. Product Name
Cube Tube
2. Product Code
14111
3. Colour
As shown above. Customer can choose from a range of colours, please contact
ROMPA® for colour choices
4. Brief Description
A foam cube with reinforced tunnel to crawl through.
5. Contents
1 x Cube Tube
6. Snoezelen® Stimulations
Visual
7. Best Use
Place Cube in an area where there is enough room to use the product safely.

8. Compatible ROMPA® Products
ROMPA® offers an extensive range of soft play items and wall/floor cushioning.
Visit www.rompa.com for more information.
9. Starting Up
Choose a suitable location indoors.
10. Detailed Description
A foam cube with reinforced tunnel to crawl through. One colour as standard
(please specify when ordering). The central area can be made in a different colour
for visual contrast and ease of use by those with visual impairments.
11. Safety
Please read all the following safety information before each use
ALWAYS SUPERVISE THE USE OF THIS PRODUCT
Use indoors, in dry environments.
Remove all packaging and either store this in a safe place out of reach of clients or
dispose of this responsibly. Plastic bags and wrapping can be hazardous to children
and vulnerable people.
The Cube Tube contains a foam filling. Do not attempt to access the interior part of
this product. Never allow children or vulnerable people to access the interior part of
this product.
Avoid sharp or pointed objects which could puncture the product. Take care with
zips on clothing etc. Remove shoes.
Should any seams become damaged, contact ROMPA®immediately to arrange
repair or replacement. Should the product require re-filling, contact ROMPA®
immediately to discuss this.
Do not place near sources of heat or fire that may damage the surface (radiators,
fires, underfloor heating, hot central heating pipes etc.)
Some of our products contain zips for manufacturing purposes only. Do not attempt to
open these or to access the interior part of these products. Never allow children or
vulnerable people to access the interior part of this product.

12. Technical Specification
Size: 72.5 x 72.5 x 72.5cm
Tunnel: 56cm diameter.
13. Installation
Place cube where desired, ensuring that a risk assessment of the area has been made and
the surrounding area is clear from obstruction and access routes are clear to enable safe use
of the product.
14. Care and Maintenance
FABRIC MAINTENANCE
If you look after your Cube Tube it should give you many years of service.
But please observe the following:-
Always supervise the use of resources.
Organise a regular cleaning schedule.
Vinyl will crack, tear and rub off if subjected to sharp objects or continual rubbing by hard
objects. Remove shoes, and avoid buckles, zips or sharp/hard/pointed objects coming into
contact with the surface.
Check seams regularly to ensure that these are not worn or split and the interior filling
cannot be accessed.
Wipe off accidental marks/liquids at the time they occur or are noticed.
From time to time, if possible, lift floor cushion or move furniture to clean all surfaces and
the floor underneath.
Furniture and cushioning is intended to provide comfort and relaxation. Avoid eating and
drinking whilst using these products.
If the material for your furniture can be steam cleaned, please exercise great caution for the
simple reason that when creating furniture, seams and stitching are necessary which create
tiny holes where it is possible for liquid to get through into the inner foam. Should a lot of
steam/water be accidentally used, there is potential for the inner foam to get saturated and
be detrimental to your furniture.
Do not place near sources of heat or fire that may damage the surface (radiators, fires,
underfloor heating, hot central heating pipes etc.)
Direct contact with bright sunlight may affect material over time.
Do not saturate the material with lots of water.
Some of our products contain zips for manufacturing purposes only. Do not attempt to open
these or to access the interior part of these products. Never allow children or vulnerable people
to access the interior part of this product.

PVC (Vinyl)
Use a soft brush remove all loose dust/dirt
Clean with a mild detergent (such as Lux soap flakes in luke-warm solution) applied to a
sponge or damp cloth.
This may be sanitised using a weak solution of Milton fluid.
Do not use excessive amounts of water and always ensure the PVC is dry after cleaning.
Do not use an abrasive cleaning pad.
Do not use boiling/very hot water, washing up liquid / aggressive detergent or solvent based
cleaner as this will cause the coating to discolour and go hard.
Steam cleaning is not advised.
15. Troubleshooting
Not applicable
Further copies of these instructions can be downloaded at www.rompa.com
We hope you find our instructions invaluable. If you have any suggestions for improving
them further your comments will be greatly received –please contact us at
[email protected]
CUBE TUBE 14111, January 2017,
Copyright ROMPA® Ltd