Roper Rhodes Hampton HAM400FC User manual

LR
Depending on the intended location of the unit, you have
the option of choosing whether you want a left or right
hand opening door.
Choose the desired handing and fix hinges to the door
and then the carcass
Recommended
position for handle
JOINING UNITS
This unit can be joined to other units with furniture fixing bolts (not provided). It is recommended that units are joined before they are fixed to
the wall.Clamp the units together using suitable clamps, ensuring they are flush and level with each other. Drill holes through the side of the
unit and using the bolts, join units together. Remove clamps and fix the assembly to the wall as required using corner brackets (not
supplied).
Customer Services, Roper Rhodes Ltd, Brassmill Lane Trading Estate, Bath, BA1 3JF
Tel:[phone] | Fax: [phone]
Email: [email protected] | Web: www.roperrhodes.co.uk
HAMPTON
FLOOR CUPBOARD UNIT / HAM400FC
Please retain for future use
RR-HAMFC REV : JH/08/2016
Figure 4 Figure 5
Pilot holes
Block of wood
Figure 1
Figure 3
Figure 2
FITTING HANDLES
• A pilot hole located at the back of the door can be drilled if
using a single screw knob.
• If you have chosen a pull handle with 2 screws then please
pilot and then drill through the door with the handles in the
desired location.
• Carefully drill any holes using a clamped block of wood to
protect the front of the door/drawer - See fig. 1.
• Drill the door from the back (Fig. 2) and the drawer from the
front (Fig. 3)
• The handles can simply be screwed into place using the
screws supplied.
• If you choose third party handles please measure carefully
before drilling.
Recommended
for knob (Pilot
hole included)
DOOR REVERSING
Recommended
for knob
Recommended
position for handle

Once the handing has been chosen fix the name plate in
place using self adhesive on reverse of plate
DRAWER ADJUSTMENT
The drawer may require adjustment to ensure alignment.
This is achieved with the adjustable runners. They are
located at the front on the underside of the drawer. By
rotating the wheel indicated in Fig.7 vertical adjustment of
the drawer can be made.
Carcas
Front View
Drawer Side
Adjustable Runner Wheel
Side View
The drawers have a quick release function. The drawer is
removed by squeezing the handles on both of the runners
and pulling the drawer forward. The quick release handles
are located at the front on the underside of the drawer.
(see Fig.8)
Figure 8Figure 7
Figure 6
HAMPTON
FLOOR CUPBOARD UNIT / HAM400FC
Please retain for future use
Customer Services, Roper Rhodes Ltd, Brassmill Lane Trading Estate, Bath, BA1 3JF
Tel:[phone] | Fax: [phone]
Email: [email protected] | Web: www.roperrhodes.co.uk
RR-HAMSCT REV : JH/08/2016
Replacement Components
Should you require any replacement components for this product please contact Roper Rhodes using the contact details below.
FURNITURE AFTERCARE INSTRUCTIONS
As with all wooden furniture, this product should be treated with care.
We recommend...
Wipe away any water splashes or condensation after use. Excessive exposure to water will deteriorate the furniture.
All bathrooms should be well ventilated with a suitable extractor fan.
Clean with a soft damp cloth only.
Use a wax free polish if one must be used.
For removal of lime scale deposits use a suitable proprietary cleaner If necessary test on an inconspicuous area first.
Do not scrub or scour
Do not use abrasive cleaning
agents
Please DO NOT...