ROSE DISPLAYS ANOFRAME SQUARE WITH CABLE AND SAUCER User manual

Parts
35 Congress Street, Salem MA 01970
Tel# [phone] Fax# [phone]
e-mail:[e-mail]
split rails
solid rail
Figure 2
Step 1
Locate the two split rails and the
solid rail that is the same length as
the split rails.
Insert corner brackets into side
AnoFrame rails. Insert two corner
brackets into each end of the solid
side Ano rail. Insert one corner
bracket into each end of each split
side Ano rail. Fig. 1 & Fig. 2
Note: Tension tabs on corner
brackets face towards outside of
frame.
Step 2
Insert saucer into end of top Ano rail.
Fig. 3.
Note: It is easier to slide the saucer in
the Ano rail if you hold the cable as
close to the saucer as possible. Fig 4.
Step 3
Assemble frame following steps in
Fig. 5 sliding sides together in the
order shown.
Step 4
Insert poster. Fig 6.
Note: The AnoFrame shown here is
a square profile. It is available in
either square or round profile.
AnoFrameTM
Square Profile Instruction Sheet
solid rail
solid rail
split rails
Instructions For assembly
Incept-8.23.02
Figure 1
Figure 5
The AnoFrame is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INANFSQCableandSaucer
Corner
Brackets
AnoFrame Rails
12AF-100
AnoFrame
Split Rails
Figure 6
Cable and
Saucer
16-0018SS
Figure 4Figure 3

Parts
split rails
solid rail
Figure 2
Step 1
Locate the two split rails and the
solid rail that is the same length as
the split rails.
Insert corner brackets into side
AnoFrame rails. Insert two corner
brackets into each end of the solid
side Ano rail. Insert one corner
bracket into each end of each split
side Ano rail. Fig. 1 & Fig. 2
Note: Tension tabs on corner
brackets face towards outside of
frame.
Step 2
Insert saucer into end of top Ano rail.
Fig. 3.
Note: It is easier to slide the saucer in
the Ano rail if you hold the cable as
close to the saucer as possible. Fig 4.
Step 3
Assemble frame following steps in
Fig. 5 sliding sides together in the
order shown.
Step 4
Insert poster. Fig 6.
Note: The AnoFrame shown here is
a square profile. It is available in
either square or round profile.
AnoFrameTM
Square Profile Instruction Sheet
solid rail
solid rail
split rails
Instructions For assembly
Incept-8.23.02
Figure 1
Figure 5
The AnoFrame is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INANFSQCableandSaucer
Corner
Brackets
AnoFrame Rails
12AF-100
AnoFrame
Split Rails
Figure 6
Cable and
Saucer
16-0018SS
Figure 4Figure 3