ROSE DISPLAYS ANOGOTCHA ROUND WITH CABLE AND BALL User manual

Parts
Instructions for Hanging
Incept-9.9.02
AnoGotcha™is a trademark and Gotcha®is a registered trademark of Rose
Displays, Ltd. Neither the manufacturer nor any sales agent may be held
liable for injury, loss or damage resulting from the use
of these products. Part #02INSAnoGCableandBall
End Caps
06-5525T-Top Gotcha
AnoGotcha Shell
12AG400
Instruction Sheet
AnoGotcha™
Step 1
Insert T-Top Gotcha Holder into the
AnoGotcha Shell. Fig. 1
Step 2
Insert ball into top rail of the holder.
Note: It is easiest to slide the ball into the
holder if you hold the cable as close to the ball
as possible. Fig. 2
Step 3
Push end caps into place. Fig. 3
Step 4
Snap the AnoGotcha Holder completely open
so that hinge is turned up as far as possible.
Insert poster into holder until top of poster
meets top of holder. To close snap the
AnoGotcha Holder shut. Fig. 4
Step 5
Suspend poster. Fig. 5
Important note:
Please save and reuse the AnoGotcha Holder,
End Caps, and Cable and Ball for future
projects.
Figure 5
Figure 1 Figure 2
Figure 3
Figure 4
Cable and Ball
16-0018P
35 Congress Street, Salem, MA 01970
Tel# [phone] Fax# [phone]
e-mail:[e-mail]

Parts
Instructions for Hanging
Incept-9.9.02
AnoGotcha™is a trademark and Gotcha®is a registered trademark of Rose
Displays, Ltd. Neither the manufacturer nor any sales agent may be held
liable for injury, loss or damage resulting from the use
of these products. Part #02INSAnoGCableandBall
End Caps
06-5525
T-Top Gotcha
AnoGotcha Shell
12AG400
Instruction Sheet
AnoGotcha™
Step 1
Insert T-Top Gotcha Holder into the
AnoGotcha Shell. Fig. 1
Step 2
Insert ball into top rail of the holder.
Note: It is easiest to slide the ball into the
holder if you hold the cable as close to the ball
as possible. Fig. 2
Step 3
Push end caps into place. Fig. 3
Step 4
Snap the AnoGotcha Holder completely open
so that hinge is turned up as far as possible.
Insert poster into holder until top of poster
meets top of holder. To close snap the
AnoGotcha Holder shut. Fig. 4
Step 5
Suspend poster. Fig. 5
Important note:
Please save and reuse the AnoGotcha Holder,
End Caps, and Cable and Ball for future
projects.
Figure 5
Figure 1 Figure 2
Figure 3
Figure 4
Cable and Ball
16-0018P