ROSE DISPLAYS GOTCHA WITH GOTCHA CLIPS User manual

The Gotcha® is a registered trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products. Part #99INSGO
Parts
35 Congress Street, Salem MA 01970
Tel# [phone] Fax# [phone]
e-mail:[e-mail]
Instructions For Hanging
Instruction Sheet
Step 1
Place poster on a flat surface. Snap the Gotcha
Holder open and insert poster (top and bottom).
To close, snap the Gotcha Holder shut. Fig. 1
Note: It is easier to open and close the Gotcha
Holder by starting at one end and working your
way down the holder.
Step 2
Insert Gotcha Clips into slot on backside of the
top Gotcha Holder only. (You should hear a
"SNAP" when the clips are inserted properly).
Fig. 2
Note: For best results, place the clips 1/3 of the
way in from each end on the top Gotcha Holder.
Step 3
Suspend poster.
Important note:
Please save and reuse the Gotcha Holder and
Gotcha Clips for future projects.
Gotcha Clips
06-5066
Gotcha
®
Gotcha
12G100
Incept-3.1.99
Figure 1
Figure 2

The Gotcha® is a registered trademark. Neither the manufacturer nor
any sales agent may be held liable for injury, loss or damage resulting from
the use of these products. Part #99INSGOGEN
Parts
Instructions For Hanging
Instruction Sheet
Step 1
Place poster on a flat surface. Snap the Gotcha
Holder open and insert poster (top and bottom).
To close, snap the Gotcha shut. Fig. 1
Note: It is easier to open and close the Gotcha
Holder by starting at one end and working your
way down the holder.
Step 2
Insert Gotcha Clips into slot on backside of the
top Gotcha Holder only. (You should hear a
"SNAP" when the clips are inserted properly).
Fig. 2
Note: For best results, place the clips 1/3 of the
way in from each end on the top Gotcha Holder.
Step 3
Suspend poster.
Important note:
Please save and reuse the Gotcha Holder and
Gotcha Clips for future projects.
Gotcha Clips
06-5066
Gotcha
®
Gotcha
12G100
Incept-3.1.99
Figure 1
Figure 2

The Gotcha® is a registered trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products. Part #99INSGO1UP
Parts
35 Congress Street, Salem MA 01970
Tel# [phone] Fax# [phone]
e-mail:[e-mail]
Instructions For Hanging
OneUp
®
Instruction Sheet
Step 1
Place poster on a flat surface. Snap the Gotcha
Holder open and insert poster (top and bottom).
To close, snap the Gotcha Holder shut. Fig. 1
Note: It is easier to open and close the Gotcha
Holder by starting at one end and working your
way down the holder.
Step 2
Note: For OneUp applications, the Gotcha
Holder is conveniently marked in the center.
Find the mark and insert the OneUp Gotcha Clip
into slot on backside of the top Gotcha Holder
only. (You should hear a "SNAP" when the clips
are inserted properly). Fig. 2
Step 3
Suspend poster.
Important note:
Please save and reuse the Gotcha Holder and
Gotcha Clips for future projects.
OneUp Gotcha Clip
1Up-5066
Gotcha
®
Gotcha
12G100
Incept-3.1.99
Figure 1
Figure 2

The Gotcha® is a registered trademark. Neither the manufacturer nor
any sales agent may be held liable for injury, loss or damage resulting from
the use of these products. Part #99INSGO1UPGEN
Parts
Instructions For Hanging
OneUp
®
Instruction Sheet
Step 1
Place poster on a flat surface. Snap the Gotcha
Holder open and insert poster (top and bottom).
To close, snap the Gotcha shut. Fig. 1
Note: It is easier to open and close the Gotcha
Holder by starting at one end and working your
way down the holder.
Step 2
Note: For OneUp applications, the Gotcha
Holder is conveniently marked in the center.
Find the mark and insert the OneUp Gotcha Clip
into slot on backside of the top Gotcha only. (You
should hear a "SNAP" when the clips are inserted
properly). Fig. 2
Step 3
Suspend poster.
Important note:
Please save and reuse the Gotcha Holder and
Gotcha Clips for future projects.
OneUp Gotcha Clip
1Up-5066
Gotcha
®
Gotcha
12G100
Figure 1
Figure 2
Incept-3.1.99