Rosen AV7950H User manual

Dual Mutimedia
Headrest Replacement
Entertainment System
Quick Start Guide

NOTICE OF INTENDED USE
Rosen Electronics are designed to enable viewing of video
ONLY for rear-seat occupants, and are not intended for
viewing by the driver when the vehicle is in motion. Such
use might distract the driver or interfere with the driver’s
safe operation of the vehicle, and thus result in serious
injury or death. Such use might also violate state or local
laws.
Rosen Electronics disclaims any liability for any bodily
injury or property damage that might result from any
improper or unintended use.
About the Registered Marks
This item incorporates copy protection technology that is protected by U.S. patents
and other intellectual property rights of Rovi Corporation. Reverse engineering and
disassembly are prohibited.
NOTE: Features and specications listed in this manual are subject to change
without notice
Manufactured under license from Dolby Laboratories.“Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
iPod®and iPhone®are registered trademarks of Apple, Inc.
NOTICES

For complete Owner’s Manual, please visit
Rosen Electronics online at
www.RosenElectronics.com
Turning On The System
A) Turn vehicle ignition to ON or ACC
B) Press POWER on the front display or wireless remote on each system
1

POWER
SPEAKER
SOURCE ENTER
PLAY/PAUSE
EJECT
PREVIOUS
NEXT
POWER
MUTE
SOURCE
PLAY/PAUSE
N/A
PREVIOUS
NEXT
Front Panel Controls
Front Panel Controls- Monitor Only Systems
2
A) Short Press: Switches internal sources between Main and Aux 1.
B) Long Press: Enables Rosen supported Dash System* to be accessed by
the monitor only system.
* Please contact an authorized Rosen dealer for a list of supported systems.
Source Button

3
Pause Stop
Play
Day/Night
Power
Speaker
Source
A) Turn on by pressing the OFF/ON button located on the ear piece. The power
LED on the ear piece should illuminate. If not, check that the batteries are
inserted properly and have a charge.
B) The headphones each have a two-position slide switch labeled “Ch.A/
Ch.B”. They must have a clear line of sight to the headrest monitor and must be
switched to the designated A/B Channel to operate properly.
C) To adjust the volume, use the knob on the ear piece.
Using The Headphones
Remote Control

4
A) Touch the SOURCE button on the front control panel or remote control until
“DVD Player” appears.
B) With the label facing away from you, insert a disc into the disc slot. Do not
force disc into slot. If a DVD/CD menu appears on the screen, press PLAY or
ENTER as instructed on the screen. Most disc will load and play automatically.
C) To obtain best viewing angle, adjust the screen display as needed by pressing
the bottom corners.
Note: Not all discs are supported by this system. You may nd a disc that will not play
on this system, but works ne on other players. Various manufacturers of discs change
technology from time to time which may create compatibility issues. This is not a probelm
with the unit and is not covered by warranty.
Please check with the Owner’s Manual for more detailed information.
Playing A Disc
A) Press SPEAKER on the remote or touch front control panel.
“SPEAKER SOUND ON FM__ PRESS LEFT OR RIGHT TO ADJUST” will
appear on the screen.
B) Turn the vehicle’s radio on and tune to the FM frequency displayed on the
screen.
C) If radio interference is heard, try another frequency (see Owner’s Manual for
more information.
Listening Over Vehicle Speakers
A) Connect the RCA audio and video outputs of the device to the Rosen RCA
adapter cable. Plug into AUX input port on front of monitor.
B) Press SOURCE on the remote or front control panel until “AUX 1” appears on
the screen.
Using External Video Sources

5
Selecting a display mode: The system’s “widescreen” display has a 16:9 aspect
ratio - wider than a standard television. While many DVDs provide widescreen
video images that t the screen, standard broadcast TV and many video games
do not.
• To view a widescreen DVD, press the DISPLAY button on the remote until
“WIDE” is displayed on the screen.
• To watch a fullscreen DVD, the internal game system, or
broadcast television, select “STANDARD.”
Change the Display Adjustments Remote Control Only: The display has
adjustable video settings. To change these settings, press and hold the DISPLAY
button on the remote control to bring up the following menu:
BRIGHTNESS 32
CONTRAST 32
COLOR 32
TINT 32
To select a setting to be changed: Press the DOWN arrow button to move the
cursor down the menu list. Once you have selected the item to change, use the
LEFT and RIGHT arrows on the remote or the front panel to adjust the settings.
After you have nished making your desired changes, press the DISPLAY button
on the remote to exit and save the changes you have made.
To change the value of a setting: Use the LEFT and RIGHT arrow buttons. The
range is from 0 to 63.
Adjusting The Display
Using External HDMI Sources
A) Connect the external source HDMI output to the AV Box or HDMI input port.
B) Press MODE (SOURCE on the remote control) until “AUX 2” appears on the
screen.

All rights reserved. Copyright 2015 Rosen Electronics, LP
GC1075
Rev A