Rosslare SA-95 User manual

SA-95/96
Hardwired Piezo Siren and Strobe January 2013
Installation Manual
1
1. Introduction
The SA-95 and SA-96 are members of Rosslare’s family of sirens.
Table 1 describes the models.
Table 1: Model Description
Model Functions
SA-95 Small Hardwired Siren and Strobe
SA-96 Large Hardwired Siren and Strobe
SA-95 is a small hardwired siren with one piezoelectric sounder and 4
ultra bright strobe LED arrays. The SA-96 is a large hardwire siren with
3 piezoelectric sounders and 8 ultra bright strobe LED arrays. Both
sirens are inexpensive and hardwired that are ideal for residential,
commercial, and institutional applications. The attractive modern
designs are intended for indoor installation and are perfect for
locations where both aesthetics and performance are required, such as
private homes, store fronts, medical facilities, and financial or
manufacturing institutions.
The SA-95 and SA-96 sirens require no power supply; they are
powered and activated from the hosting control panel.
The SA-95 and SA-96 sirens come in blue (L) and amber (A) as shown
in Figure 1 and Figure 2.
Figure 1: SA-95
SA-95L SA-95A
Figure 2: SA-96
SA-96L SA-96A
2. Technical Specifications
2.1 Electrical Specifications
SA-95 SA-96
Input Voltage: 8 to 14 VDC from panel
Current
Consumption:
Standby – 0 mA, Maximum – 150 mA @ 12 VDC
Strobe Type: Ultra bright LED array
Tamper: Cover and wall
Siren type: Piezoelectric
Siren output: 85 dB/100 cm 95 dB/100cm
2.2 Environmental Specifications
SA-95 SA-96
Weatherproof: IP65
Operating
Temperature:
-30˚C to 60˚C (-22˚F to 140˚F)
Storage
Temperature:
-40˚C to 70˚C (-40˚F to 158˚F)
Operating
Humidity:
0 to 95% (non-condensing)
2.3 Physical Specifications
SA-95 SA-96
Dimensions
(H x W x D)
100 x 130 x 50 mm
(3.9 x 5.1 x 2 in.)
280 x 245 x 59 mm
(10.9 x 9.6 x 2.4 in.)
Weight: 200 g (7 oz) 607 g (21.3 oz)
All manuals and user guides at all-guides.com

2
3. Installing the SA-95/96
3.1 Mounting the SA-95/96
The SA-95 and SA-96 can be easily mounted onto the wall.
To mount the siren on the wall:
For the following instructions, please refer to Figure 3 and Figure 4.
1. Open the SA-95/96 case and remove the back plane).
2. Use the mounting template or back plate to determine the desired
location.
Figure 3: SA-95 Mounting
3. Drill two holes in the wall accordingly and insert the anchors
provided.
4. Mount and fasten the siren with the screws provided. Ensure that
it is fastened and level.
5. Reassemble the unit.
Figure 4: SA-96 Mounting
4. Wiring the SA-95/96 Siren
The wirings of the SA-95 and SA-96 sirens require opening the unit as
explained in Section 3.1.
The SA-95 and SA-96 are compatible and can be connected to any of
Rosslare’s hardwire and wireless intrusion panels.
Each unit consists of the following terminals (Figure 5 and Figure 6):
Siren +/-
Strobe +/-
Tamper
To wire the siren:
1. Connect the Siren +/- terminals to the siren output (12 V) of the
intrusion panel.
2. Connect the Strobe +/- terminals:
a. To activate the strobe with the siren, connect the Strobe +/-
terminals to the Siren +/- terminals.
b. To activate the strobe without the siren, connect the Strobe
+/- terminals to any Aux output 12 VDC from the intrusion
panel.
3. Connect the Tamper terminals to the intrusion panel tamper
terminals to have the tamper alarm of the siren in the panel.
Figure 5: SA-95 Terminal Blocks
Figure 6: SA-96 Terminal Blocks
All manuals and user guides at all-guides.com

3
Limited Warranty
ROSSLARE ENTERPRISES LIMITED (ROSSLARE) TWO-YEAR LIMITED
WARRANTY is applicable worldwide. This warranty supersedes any
other warranty. ROSSLARE'S TWO-YEAR LIMITED WARRANTY is
subject to the following conditions:
WARRANTY
Warranty of ROSSLARE'S products extends to the original purchaser
(Customer) of the ROSSLARE product and is not transferable.
PRODUCTS COVERED BY THIS WARRANTY AND DURATION
ROSSLARE ENTERPRISES LTD. AND/OR SUBSIDIARIES (ROSSLARE)
warrants that the SA-95 and SA-96 Hardwired Piezoelectric Sirens and
Strobes to be free from defects in materials and assembly in the course
of normal use and service. The warranty period commences with the
date of shipment to the original purchaser and extends for a period of
2 years (24 months).
WARRANTY REMEDY COVERAGE
In the event of a breach of warranty, ROSSLARE will credit Customer
with the price of the Product paid by Customer, provided that the
warranty claim is delivered to ROSSLARE by the Customer during the
warranty period in accordance with the terms of this warranty. Unless
otherwise requested by a ROSSLARE representative, return of the failed
product(s) is not immediately required.
If ROSSLARE has not contacted the Customer within a sixty (60) day
holding period following the delivery of the warranty claim, Customer
will not be required to return the failed product(s). All returned
Product(s), as may be requested at ROSSLARE’S sole discretion, shall
become the property of ROSSLARE.
To exercise the warranty, the user must contact ROSSLARE Enterprises
Ltd. to obtain an RMA number after which, the product must be
returned to the Manufacturer freight prepaid and insured.
In the event ROSSLARE chooses to perform a product evaluation within
the sixty (60) day holding period and no defect is found, a minimum
US$ 50.00 or equivalent charge will be applied to each Product for
labor required in the evaluation.
ROSSLARE will repair or replace, at its discretion, any product that
under normal conditions of use and service proves to be defective in
material or workmanship. No charge will be applied for labor or parts
with respect to defects covered by this warranty, provided that the
work is done by ROSSLARE or a ROSSLARE authorized service center.
EXCLUSIONS AND LIMITATIONS
ROSSLARE shall not be responsible or liable for any damage or loss
resulting from the operation or performance of any Product or any
systems in which a Product is incorporated. This warranty shall not
extend to any ancillary equipment not furnished by ROSSLARE, which is
attached to or used in conjunction with a Product, nor to any Product
that is used with any ancillary equipment, which is not furnished by
ROSSLARE.
This warranty does not cover expenses incurred in the transportation,
freight cost to the repair center, removal or reinstallation of the
product, whether or not proven defective.
Specifically excluded from this warranty are any failures resulting from
Customer's improper testing, operation, installation, or damage
resulting from use of the Product in other than its normal and
customary manner, or any maintenance, modification, alteration, or
adjustment or any type of abuse, neglect, accident, misuse, improper
operation, normal wear, defects or damage due to lightning or other
electrical discharge. This warranty does not cover repair or replacement
where normal use has exhausted the life of a part or instrument, or any
modification or abuse of, or tampering with, the Product if Product
disassembled or repaired in such a manner as to adversely affect
performance or prevent adequate inspection and testing to verify any
warranty claim.
ROSSLARE does not warrant the installation, maintenance, or service of
the Product. Service life of the product is dependent upon the care it
receives and the conditions under which it has to operate.
In no event shall ROSSLARE be liable for incidental or consequential
damages.
LIMITED WARRANTY TERMS
THIS WARRANTY SETS FORTH THE FULL EXTENT OF ROSSLARE’S WARRANTY.
THE TERMS OF THIS WARRANTY MAY NOT BE VARIED BY ANY PERSON,WHETHER OR
NOT PURPORTING TO REPRESENT OR ACT ON BEHALF OF ROSSLARE.
THIS LIMITED WARRANTY IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES.ALL
OTHER WARRANTIES EXPRESSED OR IMPLIED,INCLUDING WITHOUT LIMITATION,
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE,ARE SPECIFICALLY EXCLUDED.
IN NO EVENT SHALL ROSSLARE BE LIABLE FOR DAMAGES IN EXCESS OF THE
PURCHASE PRICE OF THE PRODUCT,OR FOR ANY OTHER INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES,INCLUDING BUT NOT LIMITED TO LOSS OF
USE,LOSS OF TIME,COMMERCIAL LOSS,INCONVENIENCE,AND LOSS OF PROFITS,
ARISING OUT OF THE INSTALLATION,USE,OR INABILITY TO USE SUCH PRODUCT,TO
THE FULLEST EXTENT THAT ANY SUCH LOSS OR DAMAGE MAY BE DISCLAIMED BY
LAW.
THIS WARRANTY SHALL BECOME NULL AND VOID IN THE EVENT OF A VIOLATION OF
THE PROVISIONS OF THIS LIMITED WARRANTY.
Contact Information
Asia Pacific, Middle East, Africa
Rosslare Enterprises Ltd.
Kowloon Bay, Hong Kong
Tel: [phone]
Fax: [phone]
[e-mail]
United States and Canada
Rosslare Security Products, Inc.
Southlake, TX, USA 76092
Toll Free: [phone]
Local: [phone]
Fax: [phone]
[e-mail]
Europe
Rosslare Israel Ltd.
Rosh HaAyin, Israel 48091
Tel: [phone]
Fax: [phone]
[e-mail]
Latin America
Rosslare Latin America
Buenos Aires, Argentina 1642
[e-mail]
China
Rosslare Electronics (Shenzhen) Ltd.
Shenzhen, China
Tel: [phone]
Fax: [phone]
[e-mail]
www.rosslaresecurity.com
0706-0960431+03
All manuals and user guides at all-guides.com