Roverpet F26 User manual

Roverpet 20 Kiji Dava Circle Prescott, Arizona 86301 800-658-5925 [e-mail]
Page 1 of 2
Roverpet #F26 –2’x 6’Floor Assembly Instructions
Inventory List: Roverpet #F26 Sealed Floor
1) #F26 PVC floor for 2’ x 6’ pet cage AND/OR (2) #F26 PVC floor for 4’ x 6’ pet cage
(8) #250 floor clips for each included floor
Assembly Procedure
1.) Unpack contents of shipping carton and compare to inventory list above.
2.) Place the #F26 floor, flat side down, on your floor. Make sure the #F26 floor is resting completely flat on your floor
surface.
3.) Place your existing Roverpet dog cage over the floor. The Roverpet dog cage will rest on the outside of the #F26 floor
frame.
4.) With the dog cage positioned over the #F26 floor, install (1) #250 floor clip in the middle of each PVC panel. Snap the
clip over the panel frame and #F26 floor frame, securing the panel to the #F26 floor.

Roverpet 20 Kiji Dava Circle Prescott, Arizona 86301 800-658-5925 [e-mail]
Page 2 of 2
Note: If your dog cage contains a door panel, place the (1) #250 clip just to the inside of the door opening area.
5.) For multi-floor dog cages: Install (6) #250 floor clips over the #F26 floor frames where they meet together. Place (2)
#250 floor clip at the furthest most points of the #F26 frames and (4) more #250 floor clips evenly spaced across the
two #F26 floor frames. Connecting the pet enclosure panels to the #F26 floor frames involves the same process as
stated in step #4.
Congratulations, you are now ready to use your Roverpet #F26 Dog Cage with Floor!
CAUTION
*** ONCE THE FLOORS ARE ASSEMBLED DO NOT WALK ON THEM ***
www.roverpet.com
Property of Roverpet