Royalcraft MP1 User manual

Product size:
Coee Table: Dia50*H52cm
Egg Chair: W73*D80*H90cm
The intended use of this product is for domestic use only.
Important, please retain for future reference.
Read carefully .
 ____________________ 
A. Mir  
A. Mir Co., Ltd. 1 / 7

ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 2 / 7
www.royalcraft.co.uk
Before you start
Don’ts
Do not use scourers, abrasives, washing powders, chemical
cleaners or any other substances containing abrasives since
these substances can damage the product, including the glass
panel.
To preserve the table top design do not place greasy / oily items
directly onto the surface. Use place-mats to prevent spillages of
food or drink.
Do not place very hot or very cold items on the glass surface
unless adequately thick table-mats are used to prevent such
items from coming into contact with the glass.
Do not use the table as a chopping surface.
Do not strike the table with hard or pointed items.
Do not sit or lean on the table.
Do not use power tools to construct this product.
Do not use this product if parts are missing, damaged or worn.
Do not stand or climb onto the product and do not use it as a
ladder, as this could lead to it unbalancing and overturning.
Never tilt the chairs during use.
Never drag furniture when moving it, always lift it.
Number of people required for assembly
One person
Time to assemble
30 minutes
Tools required
Monaco 3pc Egg Chair Bistro Set
Assembly instructions
Dos
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Unwrap all packaging materials and place the components on a
suitable surface to prevent scratching your product.
Check all contents are present prior to assembly as per the parts
list provided. In the event of problems or missing parts, please
contact the seller.
Check all screws and bolts are tightened and inspect regularly.
Cover furniture when not in use to add additional protection to your
product.
During severe weather conditions, including high winds, rain, hail,
thunderstorms, extreme heat and cold temperatures, the product
should be stored inside in a cool, dry place.
To best preserve the synthetic rattan, please use a protective
cover when your furniture is not in use. We would also recommend
using a gazebo or parasol over your furniture during the summer
period and prolonged sunny spells. This will help prevent harmful
UV rays from damaging and discolouring the material.
Ensure that the product is clean and dry before storage.
Clean your product with a sponge and warm soapy water then
wipe with a clean, dry cloth.
Where instructions as to the; storage, commissioning, installation,
use and maintenance of the goods or (if there is none) good trade
practice are not followed and a defect arises this will void the
12 month manufacturer's guarantee on the product.
Warnings
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
Ensure that this product is fully assembled as illustrated before use.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Do not stand or climb onto this product.
This product is intended for domestic use only.
Ensure the product is always placed on level ground.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
Tips: .
It is best not to fully tighten the nuts and bolts until
they are all correctly located. Only carefully tighten
them when you are satisfied with the alignment of
all components.
Be careful not to overtighten.

ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 3 / 7
www.royalcraft.co.uk
Member Part
Part
No. Diagram Qty. Part No. Diagram Qty.
MP1
Coffee Table
1 PC MP2
Chair
2 PCS
Monaco 3pc Egg Chair Bistro Set
Assembly instructions

ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 4 / 7
www.royalcraft.co.uk
Components, fixtures & fittings (not actual size)
Parts List
Part
No. Diagram Qty. Part
No. Diagram Qty.
A
Table Top Frame
1 PC B
Coffee Table Upper
Leg
1 PC
C
Coffee Table Bottom
Leg
1 PC D
Coffee Table Glass
Top
1 PC
E
Chair Seat
2 PCS F
Chair Leg
8 PCS
G
Bolt Head Cap
5 PCS H
M6*15mm Bolt
5 PCS
I
Washer
6 PCS J
Nut
1 PC
Monaco 3pc Egg Chair Bistro Set
Assembly instructions

ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 5 / 7
www.royalcraft.co.uk
Step by step assembly instructions
Note: Tighten only enough to hold parts in place. Do not tighten completely during assembly.
Some adjustments may be necessary to ensure all parts are aligned properly.
Only tighten the bolts when all bolts and washers are in place.
MP1 – Coffee Table
Step One
Take out the components, identify the Table Top Frame (A) and Glass Top (D).
Place the Glass Top (D) onto a safe, even and soft place without scratching the glass.
Step Two
Cross and combine the Coffee Table Upper Leg (B)
and Coffee Table Bottom Leg (C), using
Bolt Head Cap (G), Bolt (H), Washer (I), Nut (J),
Spanner (L), Allen Key (M) and Nut Cap (K).
K
Nut Cap
1 PC L
Spanner
1 PC
M
Allen Key
1 PC
Monaco 3pc Egg Chair Bistro Set
Assembly instructions

ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 6 / 7
www.royalcraft.co.uk
Step Three
Assemble the Coffee Table Top (A) to the
Coffee Table Legs (B & C), using
Bolt Head Cap (G), Bolt (H), and Washer (I).
Step Four
Level the table with adjustable feet screws
under the legs, carefully place the Glass Top (D)
onto the Table Top Frame (A),
make sure it is fully rested on the suction caps
which are pre-fitted on the table top frame.
Your table is now ready for use.
Adjustablefootscrew.
Monaco 3pc Egg Chair Bistro Set
Assembly instructions

ProducedinChinaforA.Mir&Co.,Ltd.
© A. Mir & Co., Ltd. 7 / 7
www.royalcraft.co.uk
MP2 - Chair
Step One
Place the Chair Seat (E) onto a safe, even and
soft place without scratching the surface.
Step Two
Screw the Chair Legs (F) into the Chair Seat (E) until the Legs are fully screwed into the
Chair Seat assembly. Lift the Chair in the upright position, level the chair with adjustable feet
screws under the legs, your Chair is now ready for use.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Warning
Never tilt the
Chair during use.
Ensure the
product is
always placed
firmly on the
ground.
Adjustablefootscrew.
Monaco 3pc Egg Chair Bistro Set
Assembly instructions