Royalcraft LYTHAM User manual

TURNBURY 2 SEATER BENCH
Item Code: 110206
Produced in Malaysia for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 1 / 4
www.royalcraft.co.uk
Assembly Instructions
Size: H92 x W119 x D61cm
Furniture should be covered/stored whilst not in use to
prolong its longevity.
(It should also be covered in adverse weather)
This product is for Domestic Use only!
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY

Produced in Malaysia for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 2 / 4
TURNBURY 2 SEATER BENCH
Item Code: 110206
Produced in Malaysia for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 1 / 4
www.royalcraft.co.uk
Assembly Instructions
Size: H92 x W119 x D61cm
Furniture should be covered/stored whilst not in use to
prolong its longevity.
(It should also be covered in adverse weather)
This product is for Domestic Use only!
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
LYTHAM 2-SEATER BENCH
Assembly Instructions
www.royalcraft.co.uk
Before you start
Two People
Time to assemble
30 minutes
Tools required
Tips: .
It is best not to fully tighten the nuts and bolts until they are
all correctly located. Only carefully tighten them when you
are satisfied with the alignment of all components.
Be careful not to overtighten.
Don’ts
Do not use scourers, abrasives, washing powders, chemical cleaners or any
other substances containing abrasives since these substances can damage
the product.
To preserve the product do not place greasy / oily items directly onto the
wooden surface.
Do not place very hot or very cold items on the wooden surface unless
adequately thick place-mats are used to prevent such items from coming into
contact with the wood.
Do not strike the product with hard or pointed items.
Do not sit or lean on the arms of this product.
Do not use power tools to construct this product.
Do not tighten screws until fully assembled.
Do not overtighten screws or bolts.
Do not use this product if parts are missing, damaged or worn.
Do not stand or climb onto the product and do not use it as a ladder, as this
could lead to it unbalancing and overturning.
Never tilt the product during use.
Never drag furniture when moving it, always lift it.
This item is intended for max use 120 kgs, do not exceed this weight
Should you choose not to treat your furniture, then it will turn a greyish
colour and develop cracks. Light sanding can restore the original colour
after which furniture oil can be regularly applied in accordance with the
instructions above.
A liberal coating of furniture oil should be given to the furniture before it is
laid up, and again when it is removed from storage.
Clean your product with a sponge and warm soapy water then wipe with a
clean, dry cloth.
Ensure that the product is clean and dry before storage.
Where instructions as to the; storage, commissioning, installation, use and
maintenance of the goods or (if there is none) good trade practice are not
followed and a defect arises this will void the 12 month manufacturer's
guarantee on the product.
Warnings
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
Ensure that this product is fully assembled as illustrated before use.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Do not stand or climb onto this product.
This product is intended for domestic use only.
Ensure the product is always placed on level ground.
Furniture can be dangerous if incorrectly used. No liability will be accepted
for damage or injury caused by incorrect use of this product.
Take care when opening and folding the furniture. Keep your hands away
from moving parts in order to prevent trapping your fingers. Children should
not open or close the furniture.
When you are ready to start, make sure that you have the right tools, plenty
of space and a clean, dry area for assembly.
Unwrap all packaging materials and place the components on a suitable
surface to prevent scratching your product.
Check all contents are present prior to assembly as per the parts list
provided. In the event of problems or missing parts, please contact the
seller.
Check all screws and bolts are tightened and inspect regularly.
During severe weather conditions, including high winds, rain, hail,
thunderstorms, extreme heat and cold temperatures, the product should be
stored inside in a cool, dry place.
To best preserve this product, please use a protective cover when your
furniture is not in use. We would also recommend using a gazebo or parasol
over your furniture during the summer period and prolonged sunny spells.
This will help prevent harmful UV rays from damaging and discolouring the
material.
Timber is a natural product and contains coloured resins which may initially
bleed out of the timber when its gets wet. Therefore we recommend that
care is taken to protect patios and decking from possible staining where the
product comes into contact with the ground. The furniture will stabilise in its
environment after the first few times it gets wet.
Wood is a natural material whose appearance will deteriorate when left
outside. A surface coating is vital in protect-ing it from premature darkening,
or splitting, when exposed to the weather. The finish should be regularly
maintained to ensure that the wood is protected from moisture and the
furniture continues to look at its best.
This product has been treated with furniture oil during manufacture and the
wood requires further treatment before being left out side. When applying
furniture oil particular care should be given to the end grain and any joints or
crevices, please note that is the products needs to be put together the first
coat should be applied to all wood surfaces before assembly.
Do’s

Produced in Malaysia for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 3 / 4
www.royalcraft.co.uk
Components, fixtures & fittings (not actual size)
Parts List
Part
No.
Diagram Qty.
Part
No.
Diagram Qty.
BR
Backrest
1 PC SE
Seat
1 PC
LL
Leg Left
1PC RL
Right Leg
1PC
A
M6 x 100mm
6 PCs B
Barrel Nut
6 PCs
C
Allen Key
1 PC
Please note the diagram is for reference only, it may not fully represent the
actual appearance of the parts.
TURNBURY 2 SEATER BENCH
Item Code: 110206
Produced in Malaysia for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 1 / 4
www.royalcraft.co.uk
Assembly Instructions
Size: H92 x W119 x D61cm
Furniture should be covered/stored whilst not in use to
prolong its longevity.
(It should also be covered in adverse weather)
This product is for Domestic Use only!
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
www.royalcraft.co.uk
Components, fixtures & fittings (not actual size)
Parts List
Part
No.
Diagram Qty.
Part
No.
Diagram Qty.
A
Backrest
1 PC
1 PC 1 PC
B
C D
Seat
1 PC
E
M6 x 100mm
6 PCs F
Barrel Nut
6 PCs
AK
Allen Key
1 PC
Please note the diagram is for reference only, it may not fully represent the
actual appearance of the parts.
TURNBURY 2 SEATER BENCH
Item Code: 110206
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
0
LYTHAM 2-SEATER BENCH
Assembly Instructions

Produced in Malaysia for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 4 / 4
www.royalcraft.co.uk
Step by step assembly instructions
Steps
1) Attach Left Leg (LL) and Right Leg (RL) to Backrest (BR) and Seat (SE) using Bolts
and Barrel Nuts (A & B).
2) Do not tighten the Bolts until all Bolts are in position.
3) Tighten all Bolts after all Bolts are in position.
Never tilt the product during use. Ensure the product is always placed firmly on the ground.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
A
B
B
B
A
A
LL
RL
SE
BR
Produced in Malaysia for A. Mir &
© A. Mir & Co., Ltd.
Furniture
(It sh
This
IMPORTANT,
LYTHAM 2-SEATER BENCH
Assembly Instructions