Ruby Tech FGS-2824 User manual

FGS-2824:
8-Port TP+16-Port SFP GbE L2 Managed Switch
Key FeaturesKey Features
Standard compliance
---IEEE 802.3x Flow Control capability
---IEEE 802.1q VLAN
---IEEE 802.1p
RoHS Compliance
Performance
Switching capacity:
---24 Gigabit Ethernet ports with non-
blocking wise speed performance.
---8 K MAC addresses
---400KB on-chip frame buffer.
---Supports Jumbo frame support, up to
9K
---Broadcast/Multicast Storm
Suppression
---Port Mirroring
VLAN
---Port-base VLAN
---IEEE802.1q tag-base VLAN, up to 256
active VLANs
---Q-in-Q is an efficient method for
enabling Subscriber Aggregation.
VSM(Virtual Stacking Management)
---Support 16 devices stacking
---Multiple switches can be managed via
one IP address, just like software
stacking
---Low cost and easily to establish
network environment, not extra
hardware require.
---Not center on the physical location of
wiring closets
Qos
---Supports Layer 4 TCP/UDP Port and
ToS Classification
---Supports 802.1p QoS with two level
priority queue
---Supports priority in a Q-in-Q tag
Bandwidth Control
---Supports Ingress, Non-unicast and
Egress Bandwidth rating management
with a resolution of 1Mbps
Protocol
LACP
---Port trunking with 8 trunking group
---Up to 12 ports for each group.
FGS-2824
BenefitsBenefits
QoS support layer 4 classification
The switch supports not only Layer 2 802.1p Priority Queue control, but also
supports programmable higher layer classification and prioritization to enable
enhanced Quality of Service (QoS) support for real time applications base on
information taken from Layer 2 to Layer 4, such as VoIP.
Port Mirroring Helps Supervisor Monitoring Network
Port mirroring copies traffic from a specific port to a target port. This
mechanism helps track network errors or abnormal packet transmission
without interrupting the flow of data.
Q-in-Q VLAN for performance & security
The VLAN feature in the switch offers the benefits of both security and
performance. VLAN is used to isolate traffic between different users and thus
provides better security. Limiting the broadcast traffic to within the same VLAN
broadcast domain also enhances performance. VLAN support enabling
advanced techniques such as "802.1Q-in-1Q" to be deployed.
802.3ad LACP for Bandwidth Aggregation
The Gigabit ports can be combined together to create a multi-link load-sharing
trunk. Up to 12 Gigabit ports can be set up per trunk for bandwidth up to
24Gbps, all traffic is aggregated based on MAC addresses, thus balancing the
traffic load. The switch supports up to 8 trunking groups. Port trunks are useful
for switch-to-switch cascading, providing very high full-duplex speeds.
802.1x Access Control Improve Network Security
802.1x features enable user authentication for each network access attempt.
Port security features allow you to limit the number of MAC addresses per
port in order to control the number of stations for each port. Static MAC
addresses can be defined for each port to ensure only registered machines
are allowed to access. By enabling both of these features, you can establish
an access mechanism based on user and machine identities, as well as
control the number of access stations.
802.1d Compatible & 802.1w Rapid Spanning Tree
For mission critical environments with multiple switches supporting STP, you
can configure the switches with a redundant backup bridge path, so
transmission and reception of packets can be guaranteed in event of any
fail-over switch on the network.
Broadcast/Multicast Storm Control
To limit too many broadcast/multicast flooding in the network, broadcast/
multicast storm control is used to restrict excess traffic. Threshold values are
available to control the rate limit for each port. Packets are discarded if the
count exceeds the configured upper threshold.
Gigabit Switch
Gigabit Switch
L2 Managed Switch
RUB
TECHTECH
Networking & Communications
R

GVRP/GARP
---802.1q with GVRP/ GARP
Multicasting
---Supports IGMP snooping including
active and passive mode
STP/RSTP
---802.1d/1w
Network Security
---802.1x access control
---Management Access Policy Control
Snmpv1,v2c Network Management
---RFC 1213 MIB (MIB-II)
Interface MIB
Address Translation MIB
IP MIB
ICMP MIB
TCP MIB
UDP MIB
SNMP MIB
---RFC 1757 RMON MIB
Statistics Group 1
History Group 2
Alarm Group 3
Event Group 9
---RFC 1493 Bridge MIB
---RFC 1643 Ethernet MIB
---Enterprise MIB
Overview
24-port Gigabit L2 Managed Switch is a
standard switch that meets all IEEE 802.3/
u/x/z Gigabit, Fast Ethernet specifications.
The switch included 8-Port 10/100/
1000Mbps UTP and 16-Port Gigabit SFP
Fiber management Ethernet switch. The
switch can be managed through RS-232
serial port via directly connection, or
through Ethernet port using CLI or Web-
based management unit, associated with
SNMP agent. With the SNMP agent, the
network administrator can login the switch
to monitor, configure and control each
port's activity in a friendly way. The overall
network management is enhanced and the
network efficiency is also improved to
accommodate high bandwidth applications.
In addition, the switch features
comprehensive and useful function such
as QoS (Quality of Service), Spanning
Tree, VLAN, Port Trunking, Bandwidth
Control, Port Security, SNMP/RMON,
IGMP Snooping capability and Illegal
Access Report via the intelligent software.
It is suitable for both metro-LAN and
office application.
Gigabit Switch
Gigabit Switch
L2 Managed Switch
Technical SpecificationsTechnical Specifications
LED Description
Diagnostic LED
Network Interface
Hardware Spec.
Packing InformationPacking Information
Ordering InformationOrdering Information
LED Color Function
Global POWER Green -Lit when +5Vpower is comingup
Global CPUACT Green -Blinks whenCPU is active
Port LINK/ACT Green -Lit when connectionwith remote device
1-8 is good
-Blinks when anytraffic is present
Port 10/100/ Green -Lit Green whenTP link on 1000Mbps
1-8 1000Mbps /Amber speed
-Lit Amberwhen TP link on 100Mbps
speed
-Off when 10Mbps or nolink occurs
Port LINK/ACT Green -Lit whenSFP connection with remote
9-24 device isgood
-Blinks when anytraffic is present
Dimensions 44(H) x 442(W)x 209(D) mm
Weight 3kg
Feature Detailed Description
Voltage 100~240 VAC,AC Line
Frequency 50~60 Hz
Consumption 30W
Ambient Temperature 0 to 40 C
Humidity 5% to 90%
Safety Comply with FCCPart 15 ClassA& CE
Mark Approval
System LED Power
10/100/1000M TP Port Per PortLED Link/Act, 10/1001000Mbps
Gigabit SFP Module LED LINK/ACT
Configuration Connector Port
10/100Mbps TP Jack (RJ-45) TP(RJ-45) 1 to8
1000Mbps SFP Fiber Module SFP 9 to24
Carton Dimensions (mm) pcs/Carton N.W (KG) G.W (KG)
530x512x345 5 20 21
Model
FGS-2824: 8-Port TP+16-Port SFP GbE L2 Managed Switch
Optional SFP Fiber Module (See note below)
RUB
TECHTECH
Networking & Communications
R
SFP.LC 1000Base-SX GE SFPMulti-Mode Fiber Module850nm
SFP.LC.M2 1000Base-SX GE SFPFiber Module, LCMulti-
Mode 1310nm 2km
SFP.LC.S10 1000Base-LX GE SFPSingle-Mode 10Km Fiber
Module 1310nm
SFP.LC.S30 1000Base-LX GE SFPSingle-Mode 30Km Fiber
Module 1310nm
SFP.L5.S50 1000Base-LX GE SFPSingle-Mode 50Km Fiber
Module 1550nm
SFP.BL5.S10 1000Base-LX GE SFPBiDi_LC 10Km ModuleSingle
Fiber 1550nm, Type 1
SFP.BL3.S10 1000Base-LX GE SFPBiDi_LC 10Km ModuleSingle
Fiber 1310nm, Type 2

Note: FGS-2824 onlysupports the SFPtransceiver from thefollowing vendors.
1. Ruby TechCorporation
2. Agilient Technologies
3. AVAGOTechnologies
4. Finisar Corporation
Gigabit Switch
Gigabit Switch
L2 Managed Switch
RUB
TECHTECH
Networking & Communications
R
Ruby Tech Corp.
3F, No.1, Lane 50, Nan Kang Road, Sec.3, Taipei, Taiwan http://www.rubytech.com.tw
TEL:[phone] FAX:[phone] E-mail [email protected]
2008-07.30-Version A
Technicalinformation listed issubject to changewithout prior notice. All brand names and trademarks are property of their respective owners.
Copyright c 2008 Ruby Tech Corp. All rights reserved.
SFP.BL5.S20 1000Base-LX GE SFPBiDi_LC 20Km Module Single Fiber 1550nm,Type 1
SFP.BL3.S20 1000Base-LX GE SFPBiDi_LC 20Km Module Single Fiber 1310nm,Type 2