Ruby Tech GS-2108C User manual

GS-2108C
BenefitsBenefits
Noise free fanless design for home and SOHO users
Home and SOHO users are always working in a small and limited space,
therefore, noise free fanless switch becomes necessary and important.
2 dual media ports for flexible fiber connection
Port 7, 8 dual media ports are provided for flexible fiber connection. You can
select to install optional SFP transceiver modules in these cages for short,
medium or long distance fiber backbone attachment. Use of the SFP will
disable their corresponding built-in 10/100/1000Base-T connections.
QoS supports layer 4 classification
lsoThe switch supports not only Layer 2 802.1p Priority Queue control, but a
supports programmable higher layer classification and prioritization to enable
enhanced Quality of Service (QoS) support for real time applications based on
information taken from Layer 2 to Layer 4, such as VoIP.
Port Mirroring helps supervisor monitoring network
Port mirroring copies traffic from a specific port to a target port. This
mechanism helps track network errors or abnormal packet transmission
without interrupting the flow of data.
Q-in-Q VLAN for performance & security
The VLAN feature in the switch offers the benefits of both security and
performance. VLAN is used to isolate traffic between different users and thus
provides better security. Limiting the broadcast traffic to within the same
VLAN broadcast domain also enhances performance. Q-in-Q, the use of
double VLAN tags is an efficient method for enabling Subscriber Aggregation.
This is very useful in the MAN.
802.3ad Port Trunk for bandwidth aggregation
The Gigabit ports can be combined together to create a multi-link load-
sharing trunk. Up to 4 Gigabit ports can be set up per trunk for bandwidth up
to 8Gbps, all traffic is aggregated based on MAC addresses, thus balancing
the traffic load. The switch supports up to 4 trunking groups. Port trunks are
useful for switch-to-switch cascading, providing very high full-duplex speeds.
802.1x Access control improves network security
802.1x features enable user authentication for each network access attempt.
Port security features allow you to limit the number of MAC addresses per
port in order to control the number of stations for each port. Static MAC
addresses can be defined for each port to ensure only registered machines
are allowed to access. By enabling both of these features, you can establish
an access mechanism based on user and machine identities, as well as
control the number of access stations.
802.1D compatible & 802.1w rapid spanning tree
For mission critical environments with multiple switches supporting STP, you
can configure the switches with a redundant backup bridge path, so
transmission and reception of packets can be guaranteed in event of any
switch on the network.
Gigabit Switch
Gigabit Switch
L2 Managed Switch
Key FeaturesKey Features
Standard Compliance
---IEEE 802.3x flow control capability
---IEEE 802.1q VLAN
---IEEE 802.1p QoS
RoHS Compliance
Performance
Switching Capacity:
---8 Gigabit Ethernet ports with non-
blocking wire speed performance
---8 K MAC addresses
---144KB on-chip frame buffer
---Supports Jumbo frame, up to 9K
---Broadcast/Multicast Storm
Suppression
---Port Mirroring
VLAN
---Port-base VLAN
---IEEE802.1q tag-base VLAN, up to 256
active VLANs
---Q-in-Q is an efficient method for
enabling Subscriber Aggregation.
VSM(Virtual Stacking Management)
---Up to 16 Switches can be managed
via Single IP
----Virtual stacking, no extra stacking
hardware is required
----Distributed stack, no physical central
wiring closet is needed
QoS
---Supports Layer 4 TCP/UDP port and
ToS classification
---Supports 802.1p QoS with two level
priority queue
---Supports priority in a Q-in-Q tag
Bandwidth Control
---Supports bandwidth rating per port
ingress and egress rate limit 1000
Mbps with 1Mbps increment
Protocol
LACP
---Port trunking with 4 trunking groups
---up to 8 ports for each group
GVRP/GARP
---802.1q with GVRP/ GARP
Multicasting
---Supports IGMP snooping including
active and passive modes
GS-2108C: 8-Port GbE L2 Managed Switch with 2 SFP Dual Media
RUB
TECHTECH
Networking & Communications
R

STP/RSTP
---802.1d/1w/1s STP
Network Security
---802.1x access control
---Management Access Policy Control
(ACL)
SNMPv1,v2c Network Management
---RFC 1213 MIB (MIB-II)
Interface MIB
Address Translation MIB
IP MIB
ICMP MIB
TCP MIB
UDP MIB
SNMP MIB
---RFC 1757 RMON MIB
Statistics Group 1
History Group 2
Alarm Group 3
Event Group 9
---RFC 1493 Bridge MIB
---RFC 1643 Ethernet MIB
---Enterprise MIB
OverviewOverview
The GS-2108 is an L2 managed Gigabit
switch that supports SNMP, Web UI and
CLI management interface. It is equipped
with 8 Gigabit TP ports and 2 of which are
dual media ports that accommodate
optional 10/100/1000Base-T or SFP
modules. In addition, the switch
implements the QoS (Quality of Service),
Mac Filtering Policy, Port Mirror, VLAN and
full L2 protocol. It is suitable for workgroups
or WAN edge application.
Gigabit Switch
Gigabit Switch
L2 Managed Switch
RUB
TECHTECH
Networking & Communications
R
Broadcast/Multicast Storm control
To limit too many broadcast/multicast flooding in the network, broadcast/
multicast storm control is used to traffic. Threshold values arerestrict excess
available to control the rate limit for each port. Packets are discarded if the
count exceeds the configured upper threshold.
Technical SpecificationsTechnical Specifications
LED Description:
Diagnostic LED:
Network Interface:
Cable and Maximum Length:
Hardware Specifications:
Packing InformationPacking Information
Ordering InformationOrdering Information
GS-2108C: 8-Port GbE L2 Managed Switch with 2 SFP Dual Media
Optional SFP Module
Note:
We recommend the SFP transceiver from the following vendors:
1. Ruby Tech Corporation 2. Agilient Technologies 3. AVAGO Technologies
4. Finisar Corporation
LED Color Function
Global POWER Green -Lit when +5Vpower is comingup
Global CPU Green -Blinks whenCPU is active
Port LINK/ACT Green -Lit when connectionwith remote device
1-8 is good
-Blinks when anytraffic is present
Port 10/100/ Green/ -Lit Green whenTP link on 1000Mbps
1-8 1000MbpsAmber speed
-Lit Amberwhen TP link on 100Mbps
speed
-Off when 10Mbps or nolink occurs
Port SFP Green -Lit when SFPconnection with remote
7,8 device isgood
-Blinks when anytraffic is present
Dimensions 44(H) x 217(W)x 132.7(D) mm
Weight 1kg
Feature Detailed Description
Voltage 100~240 VAC
Frequency 50~60 Hz
Consumption 13W
Ambient Temperature 0 to 40 C
Humidity 5% to 90%
Safety UL
Complies with FCCPart 15 ClassA& CE
Mark
System LED Power
10/100/1000M TP Port Per PortLED Link/Act, 10/100/1000Mbps
Gigabit SFP Module LED SFP
Configuration Connector Port
10/100/1000Mbps TP Jack (RJ-45) TP(RJ-45) 1 to8
1000Mbps SFP Fiber Module SFP 7, 8
TP Cat. 5 UTPcable, up to100m
1000Base-SX SC M-M Up to 220/275/500/550m,
which depends on Multi-Mode
Fiber type
1000Base-LX SC S-M Single-Mode Fiber,up to10/30/50Km
1000Base-LX WDM SCS-M Single-Mode Single Fiber, Bidi 20Km
Carton Dimensions (mm) pcs/Carton N.W (KG) G.W (KG)
495x480x335 10 17 18
530x512x345 12 20 21
Ruby Tech Corp.
3F, No.1, Lane 50, Nan Kang Road, Sec.3, Taipei, Taiwan http://www.rubytech.com.tw
TEL:[phone] FAX:[phone] E-mail [email protected]
2008-07.25 Version A
Technicalinformation listed issubject to changewithout prior notice. All brand names and trademarks are property of their respective owners.
Copyright c 2008 Ruby Tech Corp. All rights reserved.
SFP.LC 1000Base-SX GESFP Fiber Module,
LC Multi-Mode 850nm
SFP.LC.M2 1000Base-SX GESFP Fiber Module,
LC Multi-Mode 1310nm2km