Ruby Tech GS-2116C User manual

GS-2116C
BenefitsBenefits
2 dual media ports for flexible fiber connection
Port 15, 16 dual media ports are provided for flexible fiber connection. You
can select to install optional SFP transceiver modules in these cages for
short, medium or long distance fiber backbone attachment. Use of the SFP
will disable their corresponding built-in 10/100/1000BASE-T connections.
QoS supports layer 4 classification
lsoThe switch supports not only Layer 2 802.1p Priority Queue control, but a
supports programmable higher layer classification and prioritization to enable
enhanced Quality of Service (QoS) support for real time applications based
on information taken from Layer 2 to Layer 4, such as VoIP.
Port Mirroring helps supervisor monitoring network
Port mirroring copies traffic from a specific port to a target port. This
mechanism helps track network errors or abnormal packet transmission
without interrupting the flow of data.
Q-in-Q VLAN for performance & security
The VLAN feature in the switch offers the benefits of both security and
performance. VLAN is used to isolate traffic between different users and thus
provides better security. Limiting the broadcast traffic to within the same
VLAN broadcast domain also enhances performance. Q-in-Q, the use of
double VLAN tags is an efficient method for enabling Subscriber Aggregation.
This is very useful in the MAN.
802.3ad Port Trunk for bandwidth aggregation
The Gigabit ports can be combined together to create a multi-link load-sharing
trunk. Up to 8 Gigabit ports can be set up per trunk for forwarding bandwidth
up to 16Gbps, all traffic is aggregated based on MAC addresses, thus
balancing the traffic load. The switch supports up to 8 trunking groups. Port
trunks are useful for switch-to-switch cascading, providing very high full-duplex
speeds.
802.1x Access Control improves network security
802.1x features enable user authentication for each network access attempt.
Port security features allow you to limit the number of MAC addresses per
port in order to control the number of stations for each port. Static MAC
addresses can be defined for each port to ensure only registered machines
are allowed to access. By enabling both of these features, you can establish
an access mechanism based on user and machine identities, as well as
control the number of access stations.
802.1D compatible & 802.1w rapid spanning tree
For mission critical environments with multiple switches supporting STP, you
can configure the switches with a redundant backup bridge path, so
transmission and reception of packets can be guaranteed in event of any
switch on the network.
Broadcast/Multicast Storm control
To limit too many broadcast/multicast flooding in the network, broadcast/
multicast storm control is used to traffic. Threshold values arerestrict excess
available to control the rate limit for each port. Packets are discarded if the
count exceeds the configured upper threshold.
Gigabit Switch
Gigabit Switch
L2 Managed Switch
GS-2116C: 16-Port GbE L2 Managed Switch with 2 SFP Dual Media
Key FeaturesKey Features
Standard compliance
---IEEE 802.3x Flow Control capability
---IEEE 802.1q VLAN
---IEEE 802.1p QoS
RoHS Compliance
Performance
Switching capacity
---16 Gigabit Ethernet ports with non-
blocking wire speed performance
---8 K MAC addresses
---272KB on-chip frame buffer
---Supports Jumbo frame, up to 9K
---Broadcast/Multicast Storm
Suppression
---Port Mirroring
VLAN
---Port-base VLAN
---IEEE802.1q tag-base VLAN, up to 256
active VLANs
---Q-in-Q is an efficient method for
enabling Subscriber Aggregation.
VSM(Virtual Stacking Management)
---Up to 16 switches can be managed
via Single IP
----Virtual stacking, no extra stacking
hardware is required
----Distributed stacking, no physical
central wiring closet is needed
QoS
---Supports Layer 4 TCP/UDP port and
ToS classification
---Supports 802.1p QoS with two level
priority queue
---Supports priority in a Q-in-Q tag
Bandwidth Control
---Supports bandwidth rating per port
ingress and egress rate limit
1000Mbps with 1Mbps increment
Protocol
LACP
---Port trunking with 8 trunking groups
---up to 8 ports for each group
GVRP/GARP
---802.1q with GVRP/ GARP
Multicasting
---Supports IGMP snooping including
active and passive modes
RUB
TECHTECH
Networking & Communications
R

STP/RSTP
---802.1d/1w/1s STP
Network Security
---802.1x access control
---Management Access Policy Control
(L2 ACL)
SNMPv1,v2c Network Management
RFC 1213 MIB (MIB-II)
---Interface MIB
---Address Translation MIB
---IP MIB
---ICMP MIB
---TCP MIB
---UDP MIB
---SNMP MIB
RFC 1757 RMON MIB
---Statistics Group 1
---History Group 2
---Alarm Group 3
---Event Group 9
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
Enterprise MIB
OverviewOverview
The GS-2116 is an L2 managed Gigabit
switch that supports SNMP, Web UI and
CLI management interface. It is equipped
with 16 Gigabit TP ports and 2 dual media
ports that accommodate optional 10/100/
1000Base-T or SFP modules. In addition,
the switch implements the QoS (Quality of
Service), Mac Filtering Policy, Port Mirror,
VLAN and full L2 protocol. It is suitable for
workgroups or WAN edge application.
Gigabit Switch
Gigabit Switch
L2 Managed Switch
RUB
TECHTECH
Networking & Communications
R
Technical SpecificationsTechnical Specifications
LED Description:
Diagnostic LEDs:
Network Interface:
Cable and Maximum Length:
Hardware Specifications:
Packing InformationPacking Information
Ordering InformationOrdering Information
Optional SFP Module
Note: We recommend the SFP transceiver from the following vendors:
1. Ruby TechCorporation
2. Agilient Technologies
3. AVAGOTechnologies
4. Finisar Corporation
LED Color Function
Global POWER Green -Lit when +5Vpower is comingup
Global CPU Green -Blinks when CPUis active
Port LINK/ACT Green -Lit when connectionwith remote device
1-16 is good
-Blinks when any traffic is present
Port 10/100/ Green -Lit Green whenTP link on 1000Mbps
1-16 1000Mbps /Amber speed
-Lit Amberwhen TP link on 100Mbps
speed
-Off when 10Mbps or no link occurs
Port SFP Green - Lit whenSFP connection with remote
15,16 device is good
-Blinks when any traffic is present
Weight 2.86kg
Feature Detailed Description
Voltage 100~240 VAC
Frequency 50~60 Hz
Consumption 30W
Ambient Temperature 0 to 40 C
Humidity 5% to 90%
Dimensions 44(H) x 442(W)x 209(D) mm
Safety UL
Complies with FCCPart 15 ClassA& CE
Mark
System LED Power
10/100/1000M TP Port Per PortLED Link/Act, 10/100/1000Mbps
Gigabit SFP Module LED SFP
Configuration Connector Port
10/100/1000Mbps TP Jack (RJ-45) TP(RJ-45) 1 to16
1000Mbps SFP Fiber Module SFP 15, 16
Feature Detailed Description
TP Cat. 5 UTPcable, up to 100m
1000Base-SX SC M-M Up to 220/275/500/550m,which
depends on Multi-Mode Fiber type
1000Base-LX SC S-M Single-Mode Fiber,up to10/30/50Km
1000Base-LX WDM SCS-M Single-Mode Single Fiber, Bidi 20Km
Carton Dimensions (mm) pcs/Carton N.W (KG) G.W (KG)
530x512x345 5 19 20
Ruby Tech Corp.
3F, No.1, Lane 50, Nan Kang Road, Sec.3, Taipei, Taiwan http://www.rubytech.com.tw
TEL:[phone] FAX:[phone] E-mail [email protected]
2008-07.25 Version A
Technicalinformation listed is subject to change without prior notice.All brand namesand trademarks are property of their respective owners.
Copyright c 2008 Ruby Tech Corp. All rights reserved.
GS-2116C 16-Port GbE L2Managed Switch with2 SFP Dual Media
SFP.LC 1000Base-SX GESFP Fiber Module,
LC Multi-Mode 850nm
SFP.LC.M2 1000Base-SX GE SFP Fiber Module,
LC Multi-Mode 1310nm2km