Ruijie RG-CS83 Series Installation and operating manual

Ruijie RG-CS83 Series Switches
Hardware Installation and Reference Guide
Document Version: V1.0
Date: 2023.08.20
Copyright © 2023 Ruijie Networks

Copyright
Copyright © 2023 Ruijie Networks
All rights are reserved in this document and this statement.
Any reproduction, excerption, backup, modification, transmission, translation or commercial use of this document
or any portion of this document, in any form or by any means, without the prior written consent of Ruijie Networks
is prohibited.
Trademark and are owned by Ruijie Networks.
All other trademarks or registered trademarks mentioned in this document are owned by their respective owners.
Disclaimer
The products, services, or features you purchase are subject to commercial contracts and terms. Some or all of
the products, services or features described in this document may not be within the scope of your purchase or
use. Unless otherwise agreed in the contract, Ruijie Networks does not make any express or implied statement
or guarantee for the content of this document.
Due to product version upgrades or other reasons, the content of this document will be updated from time to
time. Ruijie Networks reserves the right to modify the content of the document without any notice or prompt.
This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy and will not shoulder
any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Preface
Intended Audience
This document is intended for:
Network engineers
Technical support and servicing engineers
Network administrators
Technical Support
Ruijie Networks Website: https://www.ruijienetworks.com/
Technical Support Website: https://ruijienetworks.com/support
Case Portal: https://caseportal.ruijienetworks.com
Community: https://community.ruijienetworks.com
Technical Support Email: [e-mail]
Live Chat: https://www.ruijienetworks.com/rita
Conventions
1. Conversions
Convention
Description
Bold font
Commands, command options, and keywords are in bold font.
Italic font
Arguments for which you supply values are in italic font.
[ ]
Elements in square brackets are optional.
{ x | y | z }
Alternative keywords are grouped in braces and separated by
vertical bars.
[ x | y | z ]
Optional alternative keywords are grouped in brackets and
separated by vertical bars.
&<1-n>
The argument before the sign (&) can be input for consecutive 1- n
times.
//
Double slashes at the beginning of a line of code indicate a
comment line.
2. Signs
The signs used in this document are described as follows:

Warning
An alert that calls attention to important rules and information that if not understood or followed can result in
data loss or equipment damage.
Caution
An alert that calls attention to essential information that if not understood or followed can result in function
failure or performance degradation.
Note
An alert that contains additional or supplementary information that if not understood or followed will not lead to
serious consequences.
Specification
An alert that contains a description of product or version support.
3. Note
The manual offers configuration information (including model, port type and command line interface) for
indicative purpose only. In case of any discrepancy or inconsistency between the manual and the actual version,
the actual version prevails.

Hardware Installation and Reference Guide
1
1 Product Overviews
The RG-CS83 series switches are new generation layer 3 switches, providing high performance, consolidated security and
multiple services. The switches are mainly applied to the access layer to provide line-rate switching and complete QoS
policies, prioritizing some traffic over others to ensure important data transmission without lantency. The switches also
support a wide variety of Ethernet interfaces with flexible media options for network construction.
There are 5 models available now.
Model
10/100/1000Base-T
Adaptive Ethernet
Port
GE SFP
Port
10GE
SFP+
Port
Managemen
t Port
USB
Port
RPS
Fan
Heat
Dissipation
RG-CS83-
12GT4XS-P
12 (PoE+ Capable)
N/A
4
1
1
Fixed
Power
Supply
Fixed
fan
module
s
Left- and front-
side intake and
right-side
exhaust
RG-CS83-
24GT4XS
24
N/A
4
1
1
Fixed
Power
Supply
N/A
Natural heat
dissipation
RG-CS83-
24GT4XS-P
24 (PoE+ Capable)
N/A
4
1
1
Fixed
Power
Supply
Fixed
fan
module
Left- and front-
side intake and
right-side
exhaust
RG-CS83-
48GT4XS
48
N/A
4
1
1
Fixed
Power
Supply
Fixed
fan
module
s
Left- and front-
side intake and
right-side
exhaust
RG-CS83-
48GT4XS-P
48 (PoE+ Capable)
N/A
4
1
1
Fixed
Power
Supply
Fixed
fan
module
s
Left- and front-
side intake and
right-side
exhaust
This is a Class A product. In a domestic environment this product may cause radio interference. In this case, users
are advised to take proper measures against the interference.
This device is not suitable for use in places where children may be present.
An SFP+ port supports both 10GBase-R and 1000Base-X.
The PoE+ port is backward compatible with the PoE standard.
USB port: The USB port is the interface into which you plug your USB storage device for online upgrade orlogstorage.
Console port: The console port is an RS-232 port that uses an RJ45 connector. The console port is used to connect
a PC directly to the management system for debugging, configuration, maintenance, management and program
loading.

Hardware Installation and Reference Guide
2
1.1 RG-CS83-12GT4XS-P
Specifications
Model
RG-CS83-12GT4XS-P
CPU
Dual-core CPU with the clock speed of 1.0GHz
BOOTROM
16MB
Flash Memory
512MB
SDRAM
1GB
SFP Module Type
SFP+ Port:
SFP Modules and SFP BIDI Modules
SFP+ Modules, SFP+ Cables and SFP+ BIDI Modules.
See Chapter 7 for details.
The module types may update without prior notification. Please contact Ruijie Networks
for details.
Built-in Power Supply
AC Input
Rated Voltage Range: 100 V AC to 240 V AC
Maximum Voltage Range: 90 VAC to 264 V AC
Frequency: 50 Hz/60 Hz
Rated Current Per Circuit: 6 A
SFP+ Port
10GBase-R Capable
1000Base-X Capable
RTC
Supported
PoE
All RJ45 ports are PoE+ capable and each port provides up to 30 W of power.
The maximum power is 370W.
The PoE+ port is compliant with both the PoE (IEEE802.3af) and PoE+ (IEEE802.3at)
standards.
The maximum number of PoE devices supported by the switch is determined by the
available PoE consumption of the switch and the actual PoE consumption of each
device.
The PoE port is compliant withAlternative A.
Power Consumption
Without PoE Load: < 35 W
With PoE Full Load: < 405 W
Ambient Noise
32 dB(A)
Operating
Temperature
0ºC to 45ºC (32ºF to 113 ºF ) at a height below 1800 m (1.12 miles) above the sea level
At a height ranging from 1800 m (1.12 miles) to 5000 m (3.11 miles) above the sea level, the
maximum operating temperature decreases by 1°C (1.8°F) every time the altitude increases
by 220 m (721.78 ft.).
Storage Temperature
-40ºC ~ 70ºC
Operating Humidity
10% ~ 90% RH
Operating Height
0~5000m
Storage Humidity
5% ~ 95% RH

Hardware Installation and Reference Guide
3
Fan
Fan Speed Control (manual configuration not supported)
Fan Fault Alarming
Temperature
Alarming
Supported
EMI Certification
GB/T 9254.1
Safety Regulation
Compliance
GB 4943.1
Dimensions
(W x D x H)
442mm ×220mm ×43.6mm (17.4in x 8.66in x 1.72in )
Weight
3kg (6.61 lbs.) (The product information label is on the bottom of the switch.)
Appearance
The front panel of the RG-CS83-12GT4XS-P switch provides 12 10/100/1000Base-T Ethernet ports (PoE+ Capable), four
10GE SFP+ ports, one Console port and one USB port. The back panel has anAC power plug.
Figure 1-1 RG-CS83-12GT4XS-P Switch Appearance
Front Panel
Figure 1-1 Front Panel of RG-CS83-12GT4XS-P

Hardware Installation and Reference Guide
4
Note
1. System Status LED
2．LED Mode LED
3．LED Mode button
4．USB Port
5．Console Port
6．10/100/1000Base-T Ethernet
Port
7．10GE SFP+ Port
8．Port Status LED
Back Panel
Figure 1-2 Back Panel of RG-CS83-12GT4XS-P
Note
1．AC Power Plug
2．Grounding Stud
Power Supply Module
The RG-CS83-12GT4XS-P switch has a built-in power supply module. The back panel has an an AC power plug.
Cooling
The RG-CS83-12GT4XS-P switch adopts a left-to-right and front-to-right airflow to ensure normal operation. Maintain a
minimum clearance of 100 mm (3.94 in.) around the device for air circulation.
Figure 1-3 Airflow Direction
LED

Hardware Installation and Reference Guide
5
Function
Panel ID
Color
Status
System Status LED
Status
Off
System is not powered on.
Blinking
Green (3
Hz)
System is being initialized. Continuous blinking
indicates a fault.
Blinking
Green (10
Hz)
System is being located.
Solid
Green
System is operating normally.
Solid
Yellow
The temperature at the air intake and exhaust
vents exceeds the threshold.
Solid Red
1. The temperature at the air intake and exhaust
vents well exceeds the threshold.
2. The system is not functioning properly.
LED Mode LED
LED Mode
Solid
green
The LED indicates the switching status.
Solid
yellow
The LED indicates the PoE power supply status.
10GE SFP+ Port LED
13F-16F
Off
No link is detected for this port.
Solid
Green
The port has made a successful 1/10 Gbps link.
Blinking
Green
The port is sending and receiving traffic at 1/10
Gbps.
10/100/1000Base-T Ethernet
Port LED
1-12
Off
No link is detected for this port.
Solid
Green
The port has made a successful 10/100/1000
Mbps link.
Blinking
Green
The port is sending and receiving traffic at
10/100/1000 Mbps.
RJ45 port PoE status LED
1-12
Off
PoE is not enabled.
Solid
Green
PoE is enabled. The port is operational.
Blinking
Green(3
Hz)
The port has a PoE fault of overload.
LED Mode Button：
The LED Mode button is used to switch the LED mode. The green LED Mode indicator indicates the switching status.
Press the LED Mode button, and the LED Mode indicator will turn yellow, indicating the PoE status. Press the LED
Mode button again, the indicator switches to indicating the switching status.
If you want to switch the LED mode, press the button for over two seconds.

Hardware Installation and Reference Guide
6
1.2 RG-CS83-24GT4XS
Specifications
Model
RG-CS83-24GT4XS
CPU
Dual-core CPU with the clock speed of 1.0GHz
BOOTROM
16MB
Flash Memory
512MB
SDRAM
1GB
SFP Module Type
SFP+ Port:
SFP Modules and SFP BIDI Modules
SFP+ Modules, SFP+ Cables and SFP+ BIDI Modules.
See Chapter 7 for details.
The module types may update without prior notification. Please contact Ruijie Networks
for details.
When up to two SFP+ optical modules are configured with a maximum distance of 80
km (49.71 miles), the operating temperature range is 0ºC to 45 ºC (32ºF to 113ºF).
When three or four SFP+ optical modules are configured with a maximum distance of
80 km (49.71 miles), the operating temperature range is 0ºC to 40ºC (32ºF to 104ºF).
Built-in Power Supply
AC Input
Rated Voltage Range: 100 V AC to 240 V AC
Maximum Voltage Range: 90 VAC to 264 V AC
Frequency: 50 Hz/60 Hz
Rated Current Per Circuit: 0.6A
SFP+ Port
10GBase-R Capable
1000Base-X Capable
RTC
Supported
PoE
Not supported
Power Consumption
<25W
Ambinet Noise
＜20 dB (A)
Operating
Temperature
0ºC to 45ºC (32ºF to 113 ºF ) at a height below 1800 m (1.12 miles) above the sea level
At a height ranging from 1800 m (1.12 miles) to 5000 m (3.11 miles) above the sea level, the
maximum operating temperature decreases by 1°C (1.8°F) every time the altitude increases
by 220 m (721.78 ft.).
Storage Temperature
-40ºC to 70ºC (-40ºF to 158ºF)
Operating Humidity
10% to 90% RH (non-condensing)
Storage Humidity
5% to 95% RH (non-condensing)
Operating Height
0 to 5000 m (3.11 miles) above the sea level
Fan
No fans
Temperature
Alarming
Supported
EMI Certification
GB/T 9254.1

Hardware Installation and Reference Guide
7
Safety Regulation
Compliance
GB 4943.1
Dimensions
(W x D x H)
442mm ×220mm ×43.6mm (17.4in x 8.66in x 1.72in )
Weight
3kg (6.61 lbs.) (The product information label is on the bottom of the switch.)
Appearance
The front panel of the RG-CS83-24GT4XS switch provides 24 10/100/1000Base-T Ethernet ports, four 10GE SFP+ ports,
one Console port and one USB port. The back panel has an AC power plug.
Figure 1-5 RG-CS83-24GT4XS Switch Appearance
Front Panel
Figure 1-6 Front Panel of RG-CS83-24GT4XS

Hardware Installation and Reference Guide
8
Note
1．System Status LED
2．USB Port
3．Console Port
4．10/100/1000Base-T Ethernet
Port
5．10GE SFP+ Port
6．Port Status LED
Back Panel
Figure 1-7 Back Panel of RG-CS83-24GT4XS
Note
1．AC Power Plug
2．Grounding Stud
Power Supply
The RG-CS83-24GT4XS switch has a built-in power supply module. The back panel has an an AC power plug.
Cooling
The RG-CS83-24T4XS uses natural heat dissipation to to ensure that the switch works properly in the specified
environment. Maintain a minimum clearance of 100 mm (3.94 in.) around the device for air circulation.
LED
Function
Panel ID
Color
Status
System Status LED
Status
Off
System is not powered on.
Blinking
Green (3
Hz)
System is being initialized. Continuous blinking
indicates a fault.
Blinking
Green (10
Hz)
System is being located.
Solid
Green
System is operating normally.
Solid
Yellow
The temperature at the air intake and exhaust
vents exceeds the threshold.

Hardware Installation and Reference Guide
9
Solid Red
1. The temperature at the air intake and exhaust
vents well exceeds the threshold.
2. The system is not functioning properly.
10GE SFP+ Port LED
25F-28F
Off
No link is detected for this port.
Solid
Green
The port has made a successful 1/10 Gbps link.
Blinking
Green
The port is sending and receiving traffic at 1/10
Gbps.
10/100/1000Base-T Ethernet
Port LED
1F to 24F
Off
No link is detected for this port.
Solid
Green
The port has made a successful 10/100/1000
Mbps link.
Blinking
Green
The port is sending and receiving traffic at
10/100/1000 Mbps.
1.3 RG-CS83-24GT4XS-P
Specifications
Model
RG-CS83-24GT4XS-P
CPU
Dual-core CPU with the clock speed of 1.0GHz
BOOTROM
16MB
Flash Memory
512MB
SDRAM
1GB
SFP Module Type
SFP+ Port:
SFP Modules and SFP BIDI Modules
SFP+ Modules, SFP+ Cables and SFP+ BIDI Modules.
See Chapter 7 for details.
The module types may update without prior notification. Please contact Ruijie Networks
for details.
Built-in Power Supply
AC Input
Rated Voltage Range: 100 V AC to 240 V AC
Maximum Voltage Range: 90 VAC to 264 V AC
Frequency: 50 Hz/60 Hz
Rated Current Per Circuit:6A
SFP+ Port
10GBase-R Capable
1000Base-X Capable
RTC
Supported
PoE
All RJ45 ports are PoE+ capable and each port provides up to 30 W of power.
The maximum power is 370W.

Hardware Installation and Reference Guide
10
The PoE+ port is compliant with both the PoE (IEEE802.3af) and PoE+ (IEEE802.3at)
standards.
The maximum number of PoE devices supported by the switch is determined by the
available PoE consumption of the switch and the actual PoE consumption of each
device.
The PoE port is compliant withAlternative A.
Power Consumption
Without PoE Load: < 35 W
With PoE Full Load: < 405 W
Ambient Noise
32dB(A)
Operating
Temperature
0ºC to 45ºC (32ºF to 113 ºF ) at a height below 1800 m (1.12 miles) above the sea level
At a height ranging from 1800 m (1.12 miles) to 5000 m (3.11 miles) above the sea level, the
maximum operating temperature decreases by 1°C (1.8°F) every time the altitude increases
by 220 m (721.78 ft.).
Storage Temperature
-40ºC to 70ºC (-40ºF to 158ºF)
Operating Humidity
10% to 90% RH (non-condensing)
Operating Height
0 to 5000 m (3.11 miles) above the sea level
Storage Humidity
5% to 95% RH (non-condensing)
Fan
Fan Speed Control (manual configuration not supported)
Fan Fault Alarming
Temperature
Alarming
Supported
EMI Certification
GB/T 9254.1
Safety Regulation
Compliance
GB 4943.1
Dimensions
(W x D x H)
442mm ×220mm ×43.6mm (17.4in x 8.66in x 1.72in )
Weight
3kg (6.61 lbs.) (The product information label is on the bottom of the switch.)
Appearance
The front panel of the RG-CS83-24GT4XS-P Ethernet switch provides 24 10/100/1000Base-T Ethernet ports, four 10GE
SFP+ ports, one Console port and one USB port. The back panel has an AC power plug.
Figure 1-8 RG-CS83-24GT4XS-P Switch Appearance

Hardware Installation and Reference Guide
11
Front Panel
Figure 1-9 Front Panel of RG-CS83-24GT4XS-P
Note
1．System Status LED
2．LED Mode LED
3．LED Mode button
4．USB Port
5．Console\ Port
6．10/100/1000Base-T Ethernet
Port
7．10GE SFP+ Port
8．Port Status LED
Back Panel
Figure 1-10 Back Panel of RG-CS83-24GT4XS-P
Note
1．AC power plug
2．Grounding Stud
Power Supply

Hardware Installation and Reference Guide
12
The RG-CS83-24GT4XS-P switch has a built-in power supply module. The back panel has an an AC power plug.
Cooling
The RG-CS83-24GT4XS-P switch adopts a left-to-right and front-to-right airflow to ensure normal operation. Maintain a
minimum clearance of 100 mm (3.94 in.) around the device for air circulation.
Figure 1-11 Airflow Direction
LED
Function
Panel ID
Color
Status
System Status LED
Status
Off
System is not powered on.
Blinking
Green (3
Hz)
System is being initialized. Continuous blinking
indicates a fault.
Blinking
Green (10
Hz)
System is being located.
Solid
Green
System is operating normally.
Solid
Yellow
The temperature at the air intake and exhaust
vents exceeds the threshold.
Solid Red
1. The temperature at the air intake and exhaust
vents well exceeds the threshold.
2. The system is not functioning properly.
LED Mode LED
LED Mode
Solid
green
The LED indicates the switching status.
Solid
yellow
The LED indicates the PoE power supply status.
10GE SFP+ Port LED
25F to 28F
Off
No link is detected for this port.
Solid
Green
The port has made a successful 1/10 Gbps link.
Blinking
The port is sending and receiving traffic at 1/10

Hardware Installation and Reference Guide
13
Green
Gbps.
10/100/1000Base-T Ethernet
Port LED
1 to 24
Off
No link is detected for this port.
Solid
Green
The port has made a successful 10/100/1000
Mbps link.
Blinking
Green
The port is sending and receiving traffic at
10/100/1000 Mbps.
RJ45 port PoE status LED
1 to 24
Off
PoE is not enabled.
Solid
Green
PoE is enabled. The port is operational.
Blinking
Green(3
Hz)
The port has a PoE fault of overload.
LED Mode Button：
The LED Mode button is used to switch the LED mode. The green LED Mode indicator indicates the switching status.
Press the LED Mode button, and the LED Mode indicator will turn yellow, indicating the PoE status. Press the LED
Mode button again, the indicator switches to indicating the switching status.
If you want to switch the LED mode, press the button for over two seconds.
1.4 RG-CS83-48GT4XS
Specifications
Model
RG-CS83-48GT4XS
CPU
Dual-core CPU with the clock speed of 1.0 GHz
BOOTROM
16MB
Flash Memory
512MB
SDRAM
1GB
SFP Module
SFP+ Port:
SFP Modules and SFP BIDI Modules
SFP+ Modules, SFP+ Cables and SFP+ BIDI Modules.
See Chapter 7 for details.
The module types may update without prior notification. Please contact Ruijie Networks
for details.
Built-in Power Supply
AC Input
Rated Voltage Range: 100 V AC to 240 V AC
Maximum Voltage Range: 90 V AC to 264 V AC
Frequency: 50 Hz/60 Hz
Rated Current Per Circuit: 1.5A
SFP+ Port
10GBase-R Capable
1000Base-X Capable
RTC
Supported
PoE
Not supported

Hardware Installation and Reference Guide
14
Power Consumption
<40W
Ambient Noise
32dB(A)
Temperature
0ºC to 45ºC (32ºF to 113 ºF ) at a height below 1800 m (1.12 miles) above the sea level
At a height ranging from 1800 m (1.12 miles) to 5000 m (3.11 miles) above the sea level, the
maximum operating temperature decreases by 1°C (1.8°F) every time the altitude increases
by 220 m (721.78 ft.).
Storage Temperature
-40ºC to 70ºC (-40ºF to 158ºF)
Operating Humidity
10% to 90% RH (non-condensing)
Operating Height
0 to 5000 m (3.11 miles) above the sea level
Storage Humidity
5% to 95% RH (non-condensing)
Fan
Fan Speed Control (manual configuration not supported)
Fan Fault Alarming
Temperature
Alarming
Supported
EMI Certification
GB/T 9254.1
Safety Regulation
Compliance
GB 4943.1
Dimensions
(W x D x H)
442×220×43.6
Weight
3 kg (6.17 lbs.) (The product information label is on the bottom of the switch.)
Appearance
The front panel of the RG-CS83-48GT4XS Ethernet switch provides 48 10/100/1000Base-T Ethernet ports, four 10GE
SFP+ ports, one Console port and one USB port. The back panel has an AC power plug.
Figure 1-22 RG-CS83-48GT4XS Switch Appearance

Hardware Installation and Reference Guide
15
Front Panel
Figure 1-13 Front Panel of RG-CS83-48GT4XS
Note
1．System Status LED
2．USB Port
3．Console Port
4．10/100/1000Base-T Ethernet
Port
5．10GE SFP+ Port
6．Port Status LED
Back Panel
Figure 1-14 Back Panel of RG-CS83-48GT4XS
Note
1．AC Power Plug
2．Grounding Stud
Power Supply

Hardware Installation and Reference Guide
16
The RG-CS83-48GT4XS switch has a built-in power supply module. The back panel has an AC power plug.
Cooling
The RG-CS83-48GT4XS switch adopts a left-to-right and front-to-right airflow to ensure normal operation. Maintain a
minimum clearance of 100 mm (3.94 in.) around the device for air circulation.
Figure 1-15 Airflow Direction
LED
Function
Panel ID
Color
Status
System Status LED
Status
Off
System is not powered on.
Blinking
Green (3
Hz)
System is being initialized. Continuous blinking
indicates a fault.
Blinking
Green (10
Hz)
System is being located.
Solid
Green
System is operating normally.
Solid
Yellow
The temperature at the air intake and exhaust
vents exceeds the threshold.
Solid Red
1. The temperature at the air intake and exhaust
vents well exceeds the threshold.
2. The system is not functioning properly.
10GE SFP+ Port LED
49F to 52F
Off
No link is detected for this port.
Solid
Green
The port has made a successful 1/10 Gbps link.
Blinking
Green
The port is sending and receiving traffic at 1/10
Gbps.
10/100/1000Base-T Ethernet
Port LED
1F to 48F
Off
No link is detected for this port.
Solid
Green
The port has made a successful 10/100/1000
Mbps link.