Ruijie RG-S5760C-X Series Installation and operating manual

Ruijie RG-S5760C-X Series Switches
Hardware Installation and Reference Guide

Copyright Statement
RuijieNetworks©2022
RuijieNetworks reserves allcopyrights ofthis document.Any reproduction,excerption, backup,modification,
transmission,translationorcommercial use ofthis documentoranyportionof this document,in any form or by any
means,withoutthepriorwritten consentof RuijieNetworks is prohibited.
Exemption Statement
This document is provided “as is”. The contents of this document are subject to change without any notice. Please obtain
the latestinformationthrough theRuijieNetworks website.RuijieNetworks endeavors toensurecontentaccuracyand
willnot shoulderanyresponsibilityfor losses anddamages causeddue to contentomissions,inaccuraciesorerrors.

Preface
Thank you for usingourproducts.This manualwillguideyouthroughtheinstallation ofthe device.
This manualdescribesthefunctionalandphysicalfeatures and provides thedevice installation steps,hardware
troubleshooting,moduletechnicalspecifications,andspecifications and usageguidelines forcables andconnectors.
Audience
It is intendedfor the users who have someexperienceininstalling andmaintainingnetworkhardware.At the sametime,
it is assumedthatthe users are alreadyfamiliarwiththe relatedterms andconcepts.
Obtaining Technical Assistance
RuijieNetworks Website:https://www.ruijienetworks.com/
TechnicalSupportWebsite:https://ruijienetworks.com/support
CasePortal:https://caseportal.ruijienetworks.com
Community:https://community.ruijienetworks.com
TechnicalSupportEmail:[e-mail]
Skype: [e-mail]
Related Documents
Documents
Description
ConfigurationGuide
Describes networkprotocolsandrelatedmechanismsthatsupported bythe
product, with configurationexamples.
CommandReference
Describes the relatedconfigurationcommands,includingcommandmodes,
parameterdescriptions,usageguides,andrelatedexamples.
Symbol Conventions
An alert thatcontains additionalorsupplementaryinformationthatifnotunderstood orfollowedwillnotlead to serious
consequences.
An alert that calls attentionto essential information thatif not understood orfollowedcanresultin function failureor
performancedegradation.

Hardware Installation and Reference Guide Overview
1
1 Overview
RuijieRG-S5760C-Xseries switches arethenext-generationLayer 3 switches.Featuredwithhighperformance,reliable
security, and multiple services,RG-S5760C-Xseries switchesaremainlyapplicabletothe convergencelayer of large-
scalenetworks toprovide full line-rateexchanging.Complete QoSfeatures differentiateservices accordingtobusiness
needs to ensure theprompttransmissionofkeydata. The RG-S5760C-Xseries switches providevarious interfaces to
meetthe requirementforinterfaces innetworkconstructions.
RG-S5760C-XSeries Switches
Model
10/100/1000
Base-T
Ethernet Port
1000MSFP
Port
10G
SFP+
Port
MGMT
Port
USB
Port
Console
Port
RPS
RG-S5760C-24GT8XS-X
24
N/A
8
1
1
1
Dual
RG-S5760C-48GT4XS-X
48
N/A
4
1
1
1
Dual
RG-S5760C-24SFP/8GT8XS-
X
8
24
(8 combo)
8
1
1
1
Dual
A combo port consistsofone 1000Base-XSFP port and one10/100/1000Base-TEthernetport. That is,only one
port of them is available at a particulartime.
SFP+ port supports both10Gbase-Rand 1000base-X.
RG-S5760C-Xseries switcheshavethe followingexternal ports:
MGMT port:This port is a 10/100/1000Mmanagementport.It is usedto connectwith an Ethernet port of a PC to
perform program.Users candoremote managementandmaintenancefortheswitchthrough the port. Use
standard networkcables when the port is connectedwith an Ethernetport.
USB port: The UniversalSerialBus (USB) portis usedto connectwith USB memoryto savelogs,hostversions,
warnings andotherdiagnosticmessages.
Console port:This port applies RS-232 interfaceelectricallevelandstandardRJ45connectors.It is usedto
connectthe serialports of the terminalPCto perform tasks includingsystemcommissioning,configuration,
maintenance,management,and software loading.
The RG-S5760C-Xseries switchis aclass Aproduct. In a domesticenvironment,this productmaycauseradio
interferenceinwhichcasethe usermaybe requiredtotake adequatemeasures.

Hardware Installation and Reference Guide Overview
2
1.1 PackageContents
Item
Quantity
Switch
1
Mounting Bracket
2
RubberPad
4
Mounting Bracket Installation Guide
1
M4x8 Phillips Countersunk Screw,GB819-85
8
GroundingCable
1
ManagementSoftware(Pre-installed)
1
The packagecontentlistdelivered withthe product prevails over that in this manual.
1.2 RG-S5760C-24GT8XS-X
Technical Specifications
Model
RG-S5760C-24GT8XS-X
CPU
Dual-core witheach1.2 GHz
BOOTROM
16 MB
Flash Memory
4 GB
SDRAM
1 GB
Optical Module
SFP+ interface
SFP module,SFPBIDI module
SFP+ module,SFP+cable, SFP+ BIDI module
See AppendixB.
The supported moduletypemay update at any time.Please consultRuijieNetworksfor
the latestinformation.
Expansion
Module Slot
1 slot
Supportedmodule:M5000X-4XS2CQ
Power Supply
Module Slot
2 slots
SupportedAC module:Theswitchsupports RG-PA150I-FandRG-PA150IB-
F after upgradedto 12.5SPJ4 or later versions.(RG-PA150I-F andRG-PA150IB-
F can be usedincombination.)
AC input:

Hardware Installation and Reference Guide Overview
3
Rated voltage: 100 to 240 V
Maximum voltage: 90 to 264V
Frequency: 50/60 Hz
Ratedcurrent per input:3 A (150W powersupply)
HVDC input:
Ratedvoltage: 240V DC
Maximum voltage: 192to 288 V DC
Ratedcurrent per input:3 A (150W powersupply)
SupportedDCmodule:Theswitchsupports RG-PD150IB-
F after upgradedto 12.5SPJ4 or later versions.
LVDC input:
Ratedvoltage: -48 to -60V DC
Maximum voltage: -36to -75V DC
Ratedcurrent per input:5 A
SFP Port
Supported
10GE SFP Port Downward Compatible
SFP+ Port
10GBase-R
1000Base-X
Power
Consumption
< 60 W (withoutexpansion module)
< 85 W (withexpansionmodule)
Temperature
V1.X (without expansionmodule):
Operating temperature:0ºC to 45ºC (32°Fto 113°F )(altitudefrom 0 m to 1800m (1.12miles))
The highestoperating temperature decreasesby1℃(1.8°F) as the altituderangingfrom 1800
m(1.12 miles)to5000m (3.11 miles)increasesbyevery 220 m (721.78ft.).
Storagetemperature:-40ºC to 70ºC (-40°Fto 158°F)
V1.X (with expansion module):
Operating temperature:0ºC to 40ºC (32°Fto 104°F) (altitudefrom 0 m to 1800m (1.12 miles))
The highestoperating temperature decreasesby1℃(1.8°F) as the altituderangingfrom 1800
m (1.12 miles)to 5000 m (3.11 miles)increasesbyevery 220 m (721.78ft.).
Storagetemperature:-40ºC to 70ºC (-40°Fto 158°F)
V2.X:
Operating temperature:0ºC to 45ºC (32°Fto 113°F)(altitude from 0m to 1800m (1.12miles))
The highestoperating temperature decreasesby1℃(1.8°F) as the altituderangingfrom 1800
m (1.12 miles)to 5000 m (3.11 miles)increasesbyevery 220 m (721.78ft.) .
Storagetemperature:-40ºC to 70ºC (-40°Fto 158°F)
Humidity
Operating humidity:10% to 90% RH

Hardware Installation and Reference Guide Overview
4
Storagehumidity: 5% to 95%RH
Altitude
0 to 5000m (0 to 3.11 miles)
Fan
Speedadjustmentand fault alarm
V1.X has 2 fans,and V2.X has 3 fans.
Temperature
Alarm
Supported
EMI Standard
GB9254-2008CLASSA
SafetyStandard
GB4943-2011
Dimensions
(W x D x H)
440mmx 340mmx 44 mm (17.32in. x 13.39in. x 1.73 in.)
Weight
4.4 kg (9.70 lbs.)
Product Appearance
The S5760C-24GT8XS-XEthernet switchprovides 2410/100/1000Base-TEthernetports,8 10GE SFP+ ports,1 MGMT
port,1 USB port, and1 Consoleportonthe front panel,2 powersupplymodule slotsand1expansionslotonthe back
panel.
Figure1-1 Appearanceof RG-S5760C-24GT8XS-X
Front Panel
Figure1-2 Front Panelof RG-S5760C-24GT8XS-X

Hardware Installation and Reference Guide Overview
5
Note:
1. System LED
2. Power SupplyStatus LED (PWR1)
3. Power SupplyStatus LED (PWR2)
4. MGMT Port Status LED
5. Console Port
6. 10/100/1000Base-TEthernetPort
7. Port Status LED
8. 10GE SFP+ Port
9. USB Port
10. MGMT Port
Rear Panel
Figure1-3 RearPanel of RG-S5760C-24GT8XS-X
Note:
1. Grounding Lug
2. Filler Panel(Expansion Module)
3. Filler Panel(Non-expansion Module)
4. Power ModuleSlot 1
5. Power ModuleSlot 2
Power Supply
RG-S5760C-24GT8XS-Xsupports 2 powersupplymodules.
Dual-powerinput:Theswitchcan be poweredbyone powersupplymodule,ortwo powersupplymodules.When both
modules are working,the switchis working in powerredundancymode.
Heat Dissipation System
The switchuses left-to-rightairflowfor heatdissipation,therebyensuringthe normalfunctionofthe device in the
specifiedenvironment.Maintaina minimumclearanceof10cm (3.94in.)aroundthe chassistoallow aircirculation.
Figure1-4 Flow Scheme ofHeat Dissipation

Hardware Installation and Reference Guide Overview
6
LED
LED
Panel Identification
Status
Meaning
System LED
Status
Off
The switchis not poweredon.
Blinkinggreen
(3 Hz)
Initializationis in progress.Continuousblinking
indicates afault.
Blinkinggreen(10
Hz)
It is usedfor on-sitepositioningofthedevice,
andallows operationandmaintenance
personneltoperform remotepoweronandoff
control.
Solidgreen
The switchis operational.
Solidyellow
Temperature alarm:
1. The temperature of inlet/outletvent exceeds
the warningthreshold.
2. The poweris insufficientfor the system.
Checkthe working environmentofthe switch
andpowersupplies immediately.
Solidred
1. The temperature ofthe inlet/outlet vent
exceeds the warning threshold.
2. The switchis faulty.
Powersupplystatus
LED
PWR1/PWR2
Off
The powersupplymodule is notin placeor not
poweredon.
Solidgreen
The powersupplymoduleis operating
normally.
Solidyellow
The powermodelis identified butnot
recognized.
Solidred
The redundantpoweris faulty or the AC power
cord is not connected.
MGMT port status
LED
MGMT
Off
The port is not connected.
Solidgreen
The port is connected at 1000 Mbps.
Blinkinggreen
The port is receivingor transmitting data at
1000Mbps.
Solidyellow
The port is connected at 10/100 Mbps.
Blinkingyellow
The port is receivingor transmitting data at
10/100 Mbps.
10GE SFP+ port
status LED
25F-32F
Off
The port is not connected.
Solidgreen
The portis connected at 1/10 Gbps.
Blinkinggreen
The port is receivingor transmitting data at
1/10 Gbps.
10/100/1000Base-T
Ethernet port status
LED
1-24
Off
The port is not connected.
Solidgreen
The port is connected at 1000 Mbps.
Blinkinggreen
The port is receivingor transmitting data at
1000Mbps.
Solidyellow
The port is connected at 10/100 Mbps.

Hardware Installation and Reference Guide Overview
7
LED
Panel Identification
Status
Meaning
Blinkingyellow
The port is receivingor transmitting data at
10/100 Mbps.
1.3 RG-S5760C-48GT4XS-X
Technical Specifications
Model
RG-S5760C-48GT4XS-X
CPU
Dual-corewith each1.2 GHz
BOOTROM
16 MB
Flash Memory
4 MB
SDRAM
1 GB
Optical Module
SFP+ interface
SFP module,SFPBIDI module
SFP+ module,SFP+cable, SFP+ BIDI module
See AppendixB.
The supported moduletype may update at any time.Please consultRuijieNetworksfor
the latestinformation.
Expansion
Module Slot
1 slot
Supportedmodule:M5000X-4XS2CQ
Power Supply
Module Slot
2 slots
SupportedAC module:Theswitchsupports RG-PA150I-FandRG-PA150IB-
F after upgradedto 12.5SPJ4 or later versions.(RG-PA150I-F andRG-PA150IB-
F can be usedincombination.)
AC input:
Rated voltage: 100 to 240 V
Maximum voltage: 90 to 264V
Frequency: 50/60 Hz
Ratedcurrent per input:3 A (150W powersupply)
HVDC input:
Ratedvoltage: 240V DC
Maximum voltage: 192 to 288 V DC
Ratedcurrent per input:3 A (150W powersupply)

Hardware Installation and Reference Guide Overview
8
SupportedDCmodule:Theswitchsupports RG-PD150IB-
F after upgradedto 12.5SPJ4 or later versions.
LVDC input:
Ratedvoltage: -48 to -60V DC
Maximum voltage: -36to -75V DC
Ratedcurrent per input:5 A
SFP Port
Supported
10GE SFP Port Downward Compatible
SFP+ Port
10GBase-R
1000Base-X
Power
Consumption
< 70 W (withoutexpansionmodule)
< 95 W (withexpansionmodule)
Temperature
V1.X (without expansionmodule):
Operating temperature:0ºC to 45ºC (32°Fto 113°F)(altitude from 0 m to 1800m (1.12miles))
The highestoperating temperature decreasesby1℃(1.8°F) as the altituderangingfrom 1800
m(1.12 miles)to5000 m(3.11 miles)increasesbyevery 220m (721.78ft.).
Storagetemperature:-40ºC to 70ºC (-40°Fto 158°F)
V1.X (with expansionmodule):
Operating temperature:0ºC to 40ºC (32°Fto 104°F) (altitudefrom 0 m to 1800m (1.12 miles))
The highestoperating temperature decreasesby1℃(1.8°F) as the altituderangingfrom 1800
m (1.12 miles)to5000m (3.11 miles)increasesbyevery 220m (721.78 ft.).
Storagetemperature:-40ºC to 70ºC (-40°Fto 158°F)
V2.X:
Operating temperature:0ºC to 45ºC (32°Fto 113°F)(altitude from 0 m to 1800m (1.12miles))
The highestoperating temperature decreasesby1℃(1.8°F) as the altituderangingfrom 1800
m (1.12 miles)to5000 m(3.11 miles)increasesbyevery 220 m (721.78ft.).
Storagetemperature:-40ºC to 70ºC (-40°Fto 158°F)
Humidity
Operating humidity:10% to 90% RH
Storagehumidity: 5% to 95% RH
Altitude
0 to 5000m (3.11miles)
Fan
Speedadjustmentand fault alarm
V1.X has 2 fans,and V2.X has 3 fans.
Temperature
Alarm
Supported
EMI Standard
GB9254-2008CLASSA

Hardware Installation and Reference Guide Overview
9
SafetyStandard
GB4943-2011
Dimensions
(W x D x H)
440mmx 340mmx 44 mm(17.32in. x 13.39 in. x 1.73 in.)
Weight
4.5 kg (9.92 lbs.)
Product Appearance
The RG-S5760C-48GT4XS-XEthernet switchprovides 48 10/100/1000Base-TEthernetports,4 10GE SFP+ ports,1
MGMT port,1 USB port, and1 Console portonthe front panel,as wellas 2 powersupplymoduleslots on theback
panel.
Figure1-5 Appearanceof RG-S5760C-48GT4XS-X
Front Panel
Figure1-6 Front Panelof RG-S5760C-48GT4XS-X
Note:
1. System Status LED
2. Power SupplyStatus LED (PWR1)
3. Power SupplyStatus LED (PWR2)
4. MGMT Port Status LED
5. Console Port
6.10/100/1000Base-TEthernetPort
7. Port Status LED
8. 10GE SFP+ Port
9. USB Port
10. MGMT Port
Rear Panel
Figure1-7 RearPanel of RG-S5760C-48GT4XS-X

Hardware Installation and Reference Guide Overview
10
Note:
1. Grounding Lug
2. Filler Panel
3. Filler Panel(Non-expansion Module)
4. Power SupplyModuleSlot 1
5. Power SupplyModuleSlot 1
Power Supply
The RG-S5760C-48GT4XS-Xsupports twopowersupplymodules.Dual-powerinput:Theswitchcan be poweredbyone
powersupplymodule,ortwo powersupplymodules. Whenbothmodulesareworking,theswitchis working inpower
redundancymode.
Heat Dissipation
RG-S5760C-48GT4XS-Xuses left-to-rightairflowfor heat dissipation,therebyensuringthe normal function ofthe device
in the specifiedenvironment.Maintaina minimumclearanceof10 cm (3.94 in.) around the chassis to allow air
circulation.
Figure1-8 Flow Scheme ofHeat Dissipation
LED
LED
Panel Identification
Status
Meaning
System LED
Status
Off
The switchis not poweredon.
Blinkinggreen
(3 Hz)
Initializationis in progress.Continuousblinking
indicates afault.
Blinkinggreen
(10Hz)
It is usedfor on-site positioningofthedevice,
andallows operationandmaintenance

Hardware Installation and Reference Guide Overview
11
LED
Panel Identification
Status
Meaning
personneltoperform remote poweronandoff
control.
Solidgreen
The switchis operational.
Solidyellow
Temperature alarm:
1. The temperature of inlet/outletvent exceeds
the warningthreshold.
2. The poweris insufficientfor the system.
Checkthe working environmentofthe switch
andpowersupplies immediately.
Solidred
1. The temperature ofthe inlet/outlet vent
exceeds the warningthreshold.
2. The switchis faulty.
Powersupplystatus
LED
PWR1/PWR2
Off
The powersupplymodule is notin placeor not
poweredon.
Solidgreen
The powersupplymoduleis operating
normally.
Solidred
The redundantpoweris faulty or the AC power
cord is not connected.
MGMT port status
LED
MGMT
Off
The port is not connected.
Solidgreen
The port is connected at 1000 Mbps.
Blinkinggreen
The port is receivingor transmitting data at
1000Mbps.
Solidyellow
The port is connected at 10/100Mbps.
Blinkingyellow
The port is receivingor transmitting data at
10/100 Mbps.
10GE SFP+ port
status LED
49F-52F
Off
The port is not connected.
Solidgreen
The portis connected at 1/10 Gbps.
Blinkinggreen
The port is receivingor transmitting data at
1/10 Gbps.
10/100/1000Base-T
Ethernet port status
LED
1-48
Off
The port is not connected.
Solidgreen
The port is connected at 1000 Mbps.
Blinkinggreen
The port is receivingor transmitting data at
1000Mbps.
Solidyellow
The port is connected at 10/100 Mbps.
Blinkingyellow
The port is receivingor transmitting data at
10/100 Mbps.
1.4 RG-S5760C-24SFP/8GT8XS-X
Technical Specifications

Hardware Installation and Reference Guide Overview
12
Model
RG-S5760C-24SFP/8GT8XS-X
CPU
Dual-corewith each1.2 GHz
BOOTROM
16 MB
Flash Memory
4 GB
SDRAM
1 GB
Optical Module
SFP+ interface
SFP module,SFPBIDI module
SFP+ module,SFP+cable, SFP+ BIDI module
See AppendixB.
The supported moduletypemay update at any time.Please consultthe Ruijie Networks
for the latestinformation.
Expansion
Module Slot
1 slot
Supportedmodule:M5000X-4XS2CQ
Power Supply
Module Slot
2 slots
SupportedAC module:Theswitchsupports RG-PA150I-FandRG-PA150IB-
F after upgradedto 12.5SPJ4 or later versions.(RG-PA150I-F andRG-PA150IB-
F can be usedincombination.)
AC input:
Rated voltage: 100 to 240 V
Maximum voltage: 90 to 264V
Frequency: 50/60 Hz
Ratedcurrent per input:3 A (150W powersupply)
HVDC input:
Ratedvoltage: 240V DC
Maximum voltage: 192 to 288 V DC
Ratedcurrent per input:3 A (150W powersupply)
SupportedDCmodule:Theswitchsupports RG-PD150IB-
F after upgradedto 12.5SPJ4 or later versions.
LVDC input:
Ratedvoltage: -48 to -60V DC
Maximum voltage: -36to -75V DC

Hardware Installation and Reference Guide Overview
13
Ratedcurrent per input:5 A
SFP Port
100Base-X
1000Base-X
SFP+ Port
10GBbase-R
1000Base-X
Power
Consumption
< 77 W (withoutexpansion module)
< 102 W (with expansionmodule)
Temperature
V1.X (without expansionmodule):
Operating temperature:0ºC to 45ºC (32°Fto 113°F)(altitude from 0 m to 1800m (1.12miles))
The highestoperating temperature decreasesby1℃(1.8°F) as the altituderangingfrom 1800
m (1.12 miles)to5000m (3.11 miles)increasesbyevery 220m (721.78 ft.).
Storagetemperature:-40ºC to 70ºC (-40°Fto 158°F)
V1.X (with expansionmodule):
Operating temperature:0ºC to 40ºC (32°Fto 104°F) (altitudefrom 0 m to 1800m (1.12 miles))
The highestoperating temperature decreasesby1℃(1.8°F) as the altituderangingfrom 1800
m (1.12 miles)to5000m (3.11 miles)increasesbyevery 220m (721.78 ft.).
Storagetemperature:-40ºC to 70ºC (-40°Fto 158°F)
V2.X:
Operating temperature:0ºC to 45ºC (32°Fto 113°F)(altitude from 0 m to 1800m (1.12miles))
The highestoperating temperature decreasesby1℃(1.8°F) as the altituderangingfrom 1800
m(1.12 miles)to5000 m (3.11 miles)increasesbyevery 220m (721.78ft.).
Storagetemperature:-40ºC to 70ºC (-40°Fto 158°F)
Humidity
Operating humidity:10% to 90% RH
Storagehumidity: 5% to 95%RH
Altitude
0 to 5000m (3.11miles)
Fan
Speedadjustmentand fault alarm
V1.X has 2 fans,and V2.X has 3 fans.
Temperature
Alarm
Supported
EMI Standard
GB9254-2008CLASSA
SafetyStandard
GB4943-2011
Dimensions
(W x D x H)
440mmx 340mmx 44 mm(17.32in. x 13.39 in. x 1.73 in.)
Weight
4.3 kg (9.48 lbs.)
Product Appearance

Hardware Installation and Reference Guide Overview
14
The RG-S5760C-24SFP/8GT8XS-X Ethernet switchprovides 24GE SFP ports (port 17-24do not supportthe rate of
100Mbps),8 10/100/1000Base-Tcomboports,810GE SFP+ ports, 1 MGMT port, 1 USB port, and 1 Console porton
the front panel,2 powersupplymodule slots and1 expansion sloton theback panel.
Figure1-9 Appearanceof RG-S5760C-24SFP/8GT8XS-X
Front Panel
Figure1-10 Front Panel of RG-S5760C-24SFP/8GT8XS-X
Note:
1. System Status LED
2. Power SupplyStatus LED (PWR1)
3. Power SupplyStatus LED (PWR2)
4. MGMT Port Status LED
5. Console Port
6. 10/100/1000Base-TEthernetPort
7. GE SFP Port Status LED
8. GE SFP Port
9. 10GE SFP+ Port Status LED
10.10GE SFP+ Port
11. USB Port
12.MGMT Port
Rear Panel
Figure1-11 RearPanel of S5760C-24SFP/8GT8XS-X
Note:
1. GroundingLug
2. FillerPanel(Expansionmodule)
3. FillerPanel(Non-expansion module)
4. PowerSupplyModule Slot 1
5. PowerSupplyModule Slot 1
Power Supply

Hardware Installation and Reference Guide Overview
15
The S5760C-24SFP/8GT8XS-X supports twopowersupplymodules.Dual-powerinput:Theswitchcan be poweredby
onepowersupplymodule,or two powersupplymodules.Whenbothtwo modules are working,theswitchis workingin
powerredundancymode.
Heat Dissipation
The RG-S5760C-24SFP/8GT8XS-X uses left-to-rightairflowfor heatdissipation,therebyensuringthe normalfunctionof
the device in the specifiedenvironment.Maintaina minimumclearanceof10 cm (3.94in.) aroundthe chassis toallowair
circulation.
Figure1-12 FlowSchemeof Heat Dissipation
LED
LED
Panel Identification
Status
Meaning
System LED
Status
Off
The switchis not poweredon.
Blinkinggreen
(3 Hz)
Initializationis in progress.Continuousblinking
indicates afault.
Blinkinggreen(10
Hz)
It is usedfor on-site positioningofthedevice,
andallows operationandmaintenance
personneltoperform remote poweronandoff
control.
Solidgreen
The switchis operational.
Solidyellow
Temperature alarm:
1. The temperature of inlet/outletvent exceeds
the warningthreshold.
2. The poweris insufficientfor the system.
Checkthe working environmentofthe switch
andpowersupplies immediately.
Solidred
The switch is faulty. For details,see
Troubleshooting.

Hardware Installation and Reference Guide Overview
16
LED
Panel Identification
Status
Meaning
Powersupplystatus
LED
PWR1/PWR2
Off
The powersupplymodule is notin placeor not
poweredon.
Solidgreen
The powersupplymodule is in place and
operational.
Solidred
The redundantpoweris faulty or the AC power
cord is not connected.
MGMT port status
LED
MGMT
Off
The port is not connected.
Solidgreen
The port is connected at 1000 Mbps.
Blinkinggreen
The port is receivingor transmitting data at
1000Mbps.
Solidyellow
The port is connected at 10/100 Mbps.
Blinkingyellow
The port is receivingor transmitting data at
10/100 Mbps.
GE SFP port status
LED
1F-16F
Off
The port is not connected.
Solidgreen
The port is connected at 1000 Mbps.
Blinkinggreen
The port is receivingor transmitting data at
1000Mbps.
Solidyellow
The port is connected at 100 Mbps.
Blinkingyellow
The port is receivingor transmitting data at
100Mbps.
10GE SFP+ port
status LED
25F-32F
Off
The port is not connected.
Solidgreen
The portis connected at 1/10 Gbps.
Blinkinggreen
The port is receivingor transmitting data at
1/10 Gbps.
GE SFP port status
LED
17F-24F
Off
The port is not connected.
Solidgreen
The port is connected at 1000 Mbps.
Blinkinggreen
The port is receivingor transmitting data at
1000Mbps.
10/100/1000Base-T
Ethernet port status
LED
1-8
Off
The port is not connected.
Solidgreen
The port is connected at 1000 Mbps.
Blinkinggreen
The port is receivingor transmitting data at
1000Mbps.
Solidyellow
The port is connected at 10/100 Mbps.
Blinkingyellow
The port is receivingor transmitting data at
10/100 Mbps.
1.5 Expansion Module
After upgradedto 12.5SPJ4, RG-S5760C-XV1.X supports M5000X-4XS2CQ.
Technical Specifications
Model
M5000X-4XS2CQ

Hardware Installation and Reference Guide Overview
17
Optical Module
SFP+ interface
SFP module,SFPBIDI module
SFP+ module,SFP+AOC cable,SFP+ BIDI module
QSFP+ module,QSFP+ AOC cable
QSFP28 module,QSFP28 AOC cable
See AppendixB.
The supported moduletypemay update at any time.Please consultthe Ruijie Networks
for the latestinformation.
SFP+ Port
10GBase-R
1000Base-X
QSFP28 Port
100G/40G
The 100G canbe splitinto4*25G modeandthe 40G canbe splitinto4*10G mode.
Power
Consumption
< 22 W
Operating
Temperature
Operating temperature:0ºC to 45ºC (32°Fto 104°F) (altitudefrom 0 m to 1800m (1.12 miles))
The highestoperating temperature decreasesby1℃(1.8°F) as the altituderangingfrom 1800
m (1.12 miles)to5000m (3.11 miles)increasesbyevery 220m (721.78 ft.).
Storagetemperature:-40ºC to 70ºC (-40°Fto 158°F)
Humidity
Operating humidity:10% to 90% RH
Storagehumidity: 5% to 95%RH
Altitude
0 to 5000m (3.11miles)
EMI Standard
GB9254-2008CLASSA
SafetyStandard
GB4943-2011
Dimensions
(W x D x H)
125mm x 120mm x 39 mm (4.92 in. x 4.72 in. x 1.54 in.)
Weight
0.45 kg (0.99lbs.)
Product Appearance
The M5000X-4XS2CQ module provides 410GE SFP+ ports and2 QSFP28 ports. The QSFP28 ports support100Gand
40G modes.The100Gcan be splitinto4*25G modeand the40G can be splitinto4*10G mode.
Figure1-9 Appearanceof M5000X-4XS2CQ Module