Ruijie RG-S6150-X Series How to use

Ruijie RG-S6150-X Series Switches
S6150-X_RGOS 12.6(2)B1302
Release Notes
Document Version: V1.0
Date: 2022.07.25
Copyright © 2022 Ruijie Networks

Copyright
Copyright © 2022 Ruijie Networks
All rights are reserved in this document and this statement.
Any reproduction, excerption, backup, modification, transmission, translation or commercial use of this document
or any portion of this document, in any form or by any means, without the prior written consent of Ruijie Networks
is prohibited.
Trademark and are owned by Ruijie Networks.
All other trademarks or registered trademarks mentioned in this document are owned by their respective owners.
Disclaimer
The products, services, or features you purchase are subject to commercial contracts and terms. Some or all of
the products, services or features described in this document may not be within the scope of your purchase or
use. Unless otherwise agreed in the contract, Ruijie Networks does not make any express or implied statement
or guarantee for the content of this document.
Due to product version upgrades or other reasons, the content of this document will be updated from time to
time. Ruijie Networks reserves the right to modify the content of the document without any notice or prompt.
This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy and will not shoulder
any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Preface
Intended Audience
This document is intended for:
Network engineers
Technical support and servicing engineers
Network administrators
Technical Support
Ruijie Networks Website: https://www.ruijienetworks.com/
Technical Support Website: https://ruijienetworks.com/support
Case Portal: https://caseportal.ruijienetworks.com
Community: https://community.ruijienetworks.com
Technical Support Email: [email protected]
Live Chat: https://www.ruijienetworks.com/rita
Conventions
1. Conventions
Convention
Description
Bold font
Commands, command options, and keywords are in bold font.
Italic font
Arguments for which you supply values are in italic font.
[ ]
Elements in square brackets are optional.
{ x | y | z }
Alternative keywords are grouped in braces and separated by
vertical bars.
[ x | y | z ]
Optional alternative keywords are grouped in brackets and
separated by vertical bars.
&<1-n>
The argument before the sign (&) can be input for consecutive 1- n
times.
//
Double slashes at the beginning of a line of code indicate a
comment line.
2. Signs
The signs used in this document are described as follows:

Warning
An alert that calls attention to important rules and information that if not understood or followed can result in
data loss or equipment damage.
Caution
An alert that calls attention to essential information that if not understood or followed can result in function
failure or performance degradation.
Note
An alert that contains additional or supplementary information that if not understood or followed will not lead to
serious consequences.
Specification
An alert that contains a description of product or version support.

Release Notes Version Information
1
1 Version Information
1.1 Basic Information
Version Number
S6150-X_RGOS 12.6(2)B1302, Release(09192208)
Applicable Products
RG-S6150-24VS8CQ-X
RG-S6150-48VS8CQ-X
Category
Pilot Release
Customers
Common
Release Date
2022-07-25
Baseline Version
N/A
Reason for Release
Support S6150-X series new products.
Use the show version detail command to check the version number.
Ruijie#show version detail
System description : Ruijie Full 25G Routing Switch(S6150-48VS8CQ-X) By
Ruijie Networks
System start time : 2022-07-25 01:41:09
System uptime : 0:00:12:27
System hardware version : 1.00
System software version : S6150-X_RGOS 12.6(2)B1302, Release(09192208)
System patch number : NA
System software number : M08385007222022
System serial number : G1RW21P000551
System boot version : 1.4.42(Master) 1.4.42(Slave)
System rboot version : 1.1.38
System core version : 4.19.1
Module information:
Slot 1/0 : S6150-48VS8CQ-X
System uptime : 0:00:12:17
Hardware version : 1.00
Boot version : 1.4.42(Master) 1.4.42(Slave)
Rboot version : 1.1.38
Software version : S6150-X_RGOS 12.6(2)B1302, Release(09192208)
Software number : M08385007222022
Serial number : G1RW21P000551
Slot 2/0 : S6150-48VS8CQ-X
System uptime : 0:00:12:27
Hardware version : 1.00
Boot version : 1.4.42(Master) 1.4.42(Slave)

Release Notes Version Information
2
Rboot version : 1.1.38
Software version : S6150-X_RGOS 12.6(2)B1302, Release(09192208)
Software number : M08385007222022
Serial number : 1234942570065
Slot 3/0 : S6150-24VS8CQ-X
System uptime : 0:00:12:25
Hardware version : 1.00
Boot version : 1.4.42(Master) 1.4.42(Slave)
Rboot version : 1.1.38
Software version : S6150-X_RGOS 12.6(2)B1302, Release(09192208)
Software number : M08385007222022
Serial number : 1234942570074
Slot 4/0 : S6150-24VS8CQ-X
System uptime : 0:00:12:27
Hardware version : 1.00
Boot version : 1.4.42(Master) 1.4.42(Slave)
Rboot version : 1.1.38
Software version : S6150-X_RGOS 12.6(2)B1302, Release(09192208)
Software number : M08385007222022
Serial number : 1234942570074

Release Notes Release Record
3
2 Release Record
Note
After the version was released, the upgrade file may be released (identified by ID) because bugs were found
and resolved.
Release Date
Upgrade File
Description
2022-07-25
S6150-X_RGOS12.6(2)B1302_09192
208_install.bin
Pilot release of RG-S6150-X series
product main program

Release Notes Hardware Support
4
3 Hardware Support
Note
The hardware version number is rounded to the first decimal place. The numeral in the second decimal place
does not change the supporting release.
Hardware Model
Version Number
Description
RG-S6150-24VS8CQ-X
1.x
Chassis
RG-S6150-48VS8CQ-X
1.x
Chassis
RG-PA550I II-F
1.x
Power Supply Module
Note
For details, see Ruijie RG-S6150-X Series Switches Hardware Installation and Reference Guide.

Release Notes Resolved Issues
5
4 Resolved Issues
N/A

Release Notes Remaining Issues
6
5 Remaining Issues
N/A

Release Notes Version Change
7
6 Version Change
Version
Baseline
Description
S6150-X_RGOS12.6(2)B1302_09192208_install.bin
N/A
Pilot release of RG-S6150-X
series product main program
6.1 Hardware Support Change
New hardware support
Hardware Model
Version Number
Description
RG-S6150-24VS8CQ-X
V1.xx
Chassis
RG-S6150-48VS8CQ-X
V1.xx
Chassis
6.2 Feature Support Change
New specifications support
Product
Feature
Access control
Loop detection
SDN virtualization
SC(supporting
IPv6)
S6150-X series
√
(Gateway mode)
√
√
√

Release Notes Related Documentation
8
7 Related Documentation
Note
You can obtain the related documents at http://www.ruijienetworks.com/.
Ruijie RG-S6150-X Series Switches Release Notes, RGOS 12.6(2)B1302
This manual introduces RGOS 12.6(2)B1302 version, including: version information, hardware support,
feature support, remaining issues, version change record, and upgrade instructions.
Ruijie RG-S6150-X Series Switches RGOS Configuration Guide, Release RGOS 12.6(2)B1302
This manual describes various network protocols and their implementation principles supported by RGOS
12.6(2)B1302 with detailed configuration examples.
Ruijie RG-S6150-X Series Switches Command Reference, Release RGOS 12.6(2)B1302
This manual describes all configuration commands supported by RGOS 12.6(2)B1302 version, including the
command modes, parameter descriptions and usage guidelines with specific examples.
Ruijie RG-S6150-X Series Switches Hardware Installation and Reference Guide
This manual describes the functional and physical features of the RG- S6150-X series switches and provides
equipment installation procedures, hardware troubleshooting, technical specifications of module, as well as
the specifications and usage guidelines of cables and connectors.
Note
The related documents are subject to change or update without prior notification. Please follow the official
website of Ruijie Network http://www.ruijienetworks.com/.

Release Notes Upgrade Instructions (12.x)
9
8 Upgrade Instructions (12.x)
To upgrade or downgrade the device to this version, the following upgrade files are required.
Applicable Product
Upgrade File
RG-S6150-24VS8CQ-X
RG-S6150-48VS8CQ-X
Upgrade File
S6150-X_RGOS12.6(2)B1302_09192208_install.bin
File Description
Installation Package
File Size
182661510 Bytes
MD5
cc3be9e4595882311bb539952277b800
8.1 Upgrade under the Main Program
Run the CLI command on the PC configured with IP address x.x.x.x (The following
bin file name is just an example.)
Ruijie# upgrade download oob_tftp://x.x.x.x/ S6150-X_RGOS12.6(2)B1302_09192208_install.bin
*May 14 10:32:20: %UPGRADE-6-INFO: Copy to /data/upgrade_rep/
*May 14 10:32:20: %UPGRADE-6-INFO: Please wait for a moment......
Press Ctrl+C to quit
!!!!!!!!!!!!!!!!!!!!!!!!!!!...
< The terminal is locked by upgrade module >
Upgrade start
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!10%
< you can press Ctrl+C to unlock terminal >
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!20%
< you can press Ctrl+C to unlock terminal >
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!30%
< you can press Ctrl+C to unlock terminal >
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!40%
< you can press Ctrl+C to unlock terminal >
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!50%
< you can press Ctrl+C to unlock terminal >
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!60%
< you can press Ctrl+C to unlock terminal >
!!!!!!!!100%
Upgrade success when you see the prompt “Upgrade finish”, the copy operation
is complete (The BIN file takes effect only after the device is restarted).
< The terminal is unlocked by upgrade module >
[Slot 0]
Device type : s57x
Status : success
Ruijie>

Release Notes Upgrade Instructions (12.x)
10
Restart the device after the upgrade is complete to validate the BIN file.
Ruijie#reload
Reload system?(Y/N)y
Ruijie#*May 14 12:51:02: %DP-3-RESET_DEV: Reset device 1 due to
SYSMON/4215/CONSOLE/reset system by reload command.
*May 14 12:51:02: %DP-3-MACHINE_RESTART: MACHINE_RESTART.
[504172.116141] %SYS-0-REBOOT: Rebooting by job: dp_mom_thread/4265
[504172.126545] reboot: Restartin
U-Boot 1.4.14-gc4283be (Mar 21 2020 - 21:56:04 +0800)
Clock Configuration:
CPU0(A53):1200 MHz CPU1(A53):1200 MHz
Bus: 500 MHz DDR: 1600 Mbps
DRAM: 1 GiB (DDR4, 16-bit, CS=2, ECC on)
Flash: SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB,
total 32 MiB
SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32
MiB
32 MiBMMC: Only Support 3.3 voltage
sdhci@30400000: 0
Loading Environment from SPI Flash... OK
Boot: Master
Net: eth0: ethernet@33410000
Press Ctrl+B to enter Boot Menu, Press Ctrl+C to enter Rboot 0
14 bytes read in 2 ms (6.8 KiB/s)
33 bytes read in 2 ms (15.6 KiB/s)
6814976 bytes read in 150 ms (43.3 MiB/s)
8422045 bytes read in 184 ms (43.7 MiB/s)
36561 bytes read in 3 ms (11.6 MiB/s)
starting pid 1179, tty '': '-/etc/sysinit'
starting initrd
Switching rootfs
[ 4.258085] TIPC: Activated (version 2.0.0)
[ 4.258546] TIPC: Started in single node mode
log: connected to ubus
Press RETURN to get started
Run the “show version”command to confirm the upgrade success:
Ruijie#show version detail
System description : Ruijie Full 25G Routing Switch(S6150-48VS8CQ-X) By
Ruijie Networks
System start time : 2022-07-25 01:41:09
System uptime : 0:00:12:27
System hardware version : 1.00
System software version : S6150-X_RGOS 12.6(2)B1302, Release(09192208)
System patch number : NA

Release Notes Upgrade Instructions (12.x)
11
System software number : M08385007222022
System serial number : G1RW21P000551
System boot version : 1.4.42(Master) 1.4.42(Slave)
System rboot version : 1.1.38
System core version : 4.19.1
Module information:
Slot 1/0 : S6150-48VS8CQ-X
System uptime : 0:00:12:17
Hardware version : 1.00
Boot version : 1.4.42(Master) 1.4.42(Slave)
Rboot version : 1.1.38
Software version : S6150-X_RGOS 12.6(2)B1302, Release(09192208)
Software number : M08385007222022
Serial number : G1RW21P000551
Slot 2/0 : S6150-48VS8CQ-X
System uptime : 0:00:12:27
Hardware version : 1.00
Boot version : 1.4.42(Master) 1.4.42(Slave)
Rboot version : 1.1.38
Software version : S6150-X_RGOS 12.6(2)B1302, Release(09192208)
Software number : M08385007222022
Serial number : 1234942570065
Slot 3/0 : S6150-24VS8CQ-X
System uptime : 0:00:12:25
Hardware version : 1.00
Boot version : 1.4.42(Master) 1.4.42(Slave)
Rboot version : 1.1.38
Software version : S6150-X_RGOS 12.6(2)B1302, Release(09192208)
Software number : M08385007222022
Serial number : 1234942570074
Slot 4/0 : S6150-24VS8CQ-X
System uptime : 0:00:12:27
Hardware version : 1.00
Boot version : 1.4.42(Master) 1.4.42(Slave)
Rboot version : 1.1.38
Software version : S6150-X_RGOS 12.6(2)B1302, Release(09192208)
Software number : M08385007222022
Serial number : 1234942570074
8.2 Upgrade with a USB Flash Disk
Run the “upgrade usb0:/xxx.bin” command.
Ruijie#upgrade usb0:/ S6150-X_RGOS12.6(2)B1302_09192208_install.bin
< The terminal is locked by upgrade module >
Upgrade start
!!!Running this command may take some time, please wait.

Release Notes Upgrade Instructions (12.x)
12
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!10%
< you can press Ctrl+C to unlock terminal >
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!20%
< you can press Ctrl+C to unlock terminal >
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!30%
< you can press Ctrl+C to unlock terminal >
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!40%
< you can press Ctrl+C to unlock terminal >
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!50%
< you can press Ctrl+C to unlock terminal >
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!60%
< you can press Ctrl+C to unlock terminal >
100%
Upgrade success when you see the prompt “Upgrade finish”, the copy operation
is complete (The BIN file takes effect only after the device is restarted).
< The terminal is unlocked by upgrade module >
[Slot 0]
Device type : s57x
Status : success
Ruijie#
Ruijie#reload
Reload system?(Y/N)y
During the upgrade, you can run the “show upgrade status” command to check the
upgrade status.
Ruijie#show upgrade status
upgrade global status: UPGRADING
[Slot 0]
Device type : s6150-x
Status : upgrading when the upgrade is complete, it will prompt
“success” here
Restart the device to validate the BIN file.
Ruijie#reload
Reload system?(Y/N)y
Ruijie#*May 14 12:51:02: %DP-3-RESET_DEV: Reset device 1 due to
SYSMON/4215/CONSOLE/reset system by reload command.
*May 14 12:51:02: %DP-3-MACHINE_RESTART: MACHINE_RESTART.
[504172.116141] %SYS-0-REBOOT: Rebooting by job: dp_mom_thread/4265
[504172.126545] reboot: Restartin
U-Boot 1.4.14-gc4283be (Mar 21 2020 - 21:56:04 +0800)
Clock Configuration:
CPU0(A53):1200 MHz CPU1(A53):1200 MHz
Bus: 500 MHz DDR: 1600 Mbps
DRAM: 1 GiB (DDR4, 16-bit, CS=2, ECC on)

Release Notes Upgrade Instructions (12.x)
13
Flash: SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB,
total 32 MiB
SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32
MiB
32 MiBMMC: Only Support 3.3 voltage
sdhci@30400000: 0
Loading Environment from SPI Flash... OK
Boot: Master
Net: eth0: ethernet@33410000
Press Ctrl+B to enter Boot Menu, Press Ctrl+C to enter Rboot 0
14 bytes read in 2 ms (6.8 KiB/s)
33 bytes read in 2 ms (15.6 KiB/s)
6814976 bytes read in 150 ms (43.3 MiB/s)
8422045 bytes read in 184 ms (43.7 MiB/s)
36561 bytes read in 3 ms (11.6 MiB/s)
starting pid 1179, tty '': '-/etc/sysinit'
starting initrd
Switching rootfs
[ 4.258085] TIPC: Activated (version 2.0.0)
[ 4.258546] TIPC: Started in single node mode
log: connected to ubus
Press RETURN to get started
Run the “show version” command to confirm the upgrade success:
Ruijie#show version detail
System description : Ruijie Full 25G Routing Switch(S6150-48VS8CQ-X) By
Ruijie Networks
System start time : 2022-07-25 01:41:09
System uptime : 0:00:12:27
System hardware version : 1.00
System software version : S6150-X_RGOS 12.6(2)B1302, Release(09192208)
System patch number : NA
System software number : M08385007222022
System serial number : G1RW21P000551
System boot version : 1.4.42(Master) 1.4.42(Slave)
System rboot version : 1.1.38
System core version : 4.19.1
Module information:
Slot 1/0 : S6150-48VS8CQ-X
System uptime : 0:00:12:17
Hardware version : 1.00
Boot version : 1.4.42(Master) 1.4.42(Slave)
Rboot version : 1.1.38
Software version : S6150-X_RGOS 12.6(2)B1302, Release(09192208)
Software number : M08385007222022

Release Notes Upgrade Instructions (12.x)
14
Serial number : G1RW21P000551
Slot 2/0 : S6150-48VS8CQ-X
System uptime : 0:00:12:27
Hardware version : 1.00
Boot version : 1.4.42(Master) 1.4.42(Slave)
Rboot version : 1.1.38
Software version : S6150-X_RGOS 12.6(2)B1302, Release(09192208)
Software number : M08385007222022
Serial number : 1234942570065
Slot 3/0 : S6150-24VS8CQ-X
System uptime : 0:00:12:25
Hardware version : 1.00
Boot version : 1.4.42(Master) 1.4.42(Slave)
Rboot version : 1.1.38
Software version : S6150-X_RGOS 12.6(2)B1302, Release(09192208)
Software number : M08385007222022
Serial number : 1234942570074
Slot 4/0 : S6150-24VS8CQ-X
System uptime : 0:00:12:27
Hardware version : 1.00
Boot version : 1.4.42(Master) 1.4.42(Slave)
Rboot version : 1.1.38
Software version : S6150-X_RGOS 12.6(2)B1302, Release(09192208)
Software number : M08385007222022
Serial number : 1234942570074
8.3 Upgrade under Uboot
Run the “@@@@b” command
Ruijie#@@@@b
[156375.133279] IRQ RESPONSES
U-Boot 1.4.14-gc4283be (Mar 21 2020 - 21:56:04 +0800)
Clock Configuration:
CPU0(A53):1200 MHz CPU1(A53):1200 MHz
Bus: 500 MHz DDR: 1600 Mbps
DRAM: 1 GiB (DDR4, 16-bit, CS=2, ECC on)
Flash: SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB,
total 32 MiB
SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32
MiB
32 MiBMMC: Only Support 3.3 voltage
sdhci@30400000: 0
Loading Environment from SPI Flash... OK
Boot: Master
Net: eth0: ethernet@33410000
Press Ctrl+B to enter Boot Menu, Press Ctrl+C to enter Rboot 0

Release Notes Upgrade Instructions (12.x)
15
During the reboot, press the combination of ctrl and c keys immediately when you
see the following prompt to enter the Rboot interface.
Press Ctrl+B to enter Boot Menu, Press Ctrl+C to enter Rboot 0
Rboot Version: 1.1.15
------------------------------------------------
Mount rootfs1 ...
Mount rootfs2 ...
Mount data ...
Mount upgrade ...
Mount upgrade_bak ...
====== Rboot Menu (Ctrl+Z to upper level) ======
TOP menu items.
************************************************
0. Tftp utilities.
1. X/Y/ZModem utilities.
2. Run main.
3. SetMac utilities.
4. Scattered utilities.
************************************************
Press a key to run the command:
Click the red prompt under the Rboot menu to enter the address configuration
menu.
====== Rboot Menu(Ctrl+Z to upper level) ======
TOP menu items.
************************************************
0. Tftp utilities.
1. XModem utilities.
2. Run main.
3. SetMac utilities.
4. Scattered utilities.
************************************************
Press a key to run the command:
====== Rboot Menu(Ctrl+Z to upper level) ======
Tftp utilities.
************************************************
0. Upgrade uboot program.
1. Upgrade rboot program.
2. Upgrade main program.
3. Burn the total FlashROM by this downloaded file.
************************************************
Press a key to run the command:
enter the Local IP:[]:

Release Notes Upgrade Instructions (12.x)
16
Under the address configuration menu, enter the switch address, the execution PC
address, and the BIN file.
************************************************
Press a key to run the command:
enter the Local IP:[]:192.12.1.1 This address is the switch address,
configured in the same network segment as the execution PC.
enter the Remote IP:[]:192.12.1.2 This address is the PC address.
enter the Filename:[]: S6150-X_RGOS12.6(2)B1302_09192208_install.bin This file
name serves as an example.
The upgrade operation starts after the above address and file name were set.
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
147M 100 147M 0 0 1902k 0 0:01:19 0:01:19 --:--:-- 1968k
100 147M 100 147M 0 0 1902k 0 0:01:19 0:01:19 --:--:-- 1902k
Upgrading, keep power on and wait please ...
Select Y as prompted to continue the next step until it prompts “upgrade success”
(the upgrade file is copied successfully).
Determined to upgrade? [Y/N]: Y
Mount File System ...
Copy file to Flash ...
Upgrade Rootfs Success.
Upgrade Success
After the upgrade file is copied successfully, it automatically returns to the
Rboot menu interface. Press Ctrl+Z to exit the menu item for reboot. (You can
also directly power off and restart the device.)
====== Rboot Menu(Ctrl+Z to upper level) ======
Tftp utilities.
************************************************
0. Upgrade uboot program.
1. Upgrade rboot program.
2. Upgrade main program.
3. Burn the total FlashROM by this downloaded file.
************************************************
Press a key to run the command:
====== Rboot Menu(Ctrl+Z to upper level) ======
TOP menu items.
************************************************
0. Tftp utilities.
1. XModem utilities.
2. Run main. Select Run main, and the switch will automatically restart.
3. SetMac utilities.
4. Scattered utilities.