Ruijie RG-S5300-E Series Installation and operating manual

Ruijie RG-S5300-E Series Switches
Hardware Installation and Reference Guide
Document Version: V1.0
Date: 2022.05.19
Copyright © 2022 Ruijie Networks

Copyright
Copyright © 2022 Ruijie Networks
All rights are reserved in this document and this statement.
Any reproduction, excerption, backup, modification, transmission, translation or commercial use of this document
or any portion of this document, in any form or by any means, without the prior written consent of Ruijie Networks
is prohibited.
Trademark and are owned by Ruijie Networks.
All other trademarks or registered trademarks mentioned in this document are owned by their respective owners.
Disclaimer
The products, services, or features you purchase are subject to commercial contracts and terms. Some or all of
the products, services or features described in this document may not be within the scope of your purchase or
use. Unless otherwise agreed in the contract, Ruijie Networks does not make any express or implied statement
or guarantee for the content of this document.
Due to product version upgrades or other reasons, the content of this document will be updated from time to
time. Ruijie Networks reserves the right to modify the content of the document without any notice or prompt.
This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy and will not shoulder
any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

I
Preface
Intended Audience
This document is intended for:
Network engineers
Technical support and servicing engineers
Network administrators
Technical Support
Ruijie Networks Website: https://www.ruijienetworks.com/
Technical Support Website: https://ruijienetworks.com/support
Case Portal: https://caseportal.ruijienetworks.com
Community: https://community.ruijienetworks.com
Technical Support Email: [email protected]
Skype: [email protected]
Conventions
1. Conversions
Convention
Description
Bold font
Commands, command options, and keywords are in bold font.
Italic font
Arguments for which you supply values are in italic font.
[ ]
Elements in square brackets are optional.
{ x | y | z }
Alternative keywords are grouped in braces and separated by vertical
bars.
[ x | y | z ]
Optional alternative keywords are grouped in brackets and separated
by vertical bars.
&<1-n>
The argument before the sign (&) can be input for consecutive 1- n
times.
//
Double slashes at the beginning of a line of code indicate a comment
line.
2. Signs
The signs used in this document are described as follows:

II
Warning
An alert that calls attention to important rules and information that if not understood or followed can result in
data loss or equipment damage.
Caution
An alert that calls attention to essential information that if not understood or followed can result in function
failure or performance degradation.
Note
An alert that contains additional or supplementary information that if not understood or followed will not lead to
serious consequences.
Specification
An alert that contains a description of product or version support.
3. Note
The manual offers configuration information (including model, port type and command line interface) for indicative
purpose only. In case of any discrepancy or inconsistency between the manual and the actual version, the actual
version prevails.

Hardware Installation and Reference Guide Product Overview
1
1 Product Overview
The RG-S5300-E series switches are new generation layer 3 switches, providing high performance, consolidated security
and multiple services. The switches are mainly applied to the access layer to provide line-rate switching and complete QoS
policies, prioritizing some traffic over others to ensure important data transmission without lantency. The switches also
support a wide variety of Ethernet interfaces with flexible media options for network construction.
There are 4 models available now.
Model
10/100/1000Base-T
Adaptive Ethernet
Port
GE
SFP
Port
10GE
SFP+
Port
Management
Port
USB
Port
Console
Port
RPS
RG-S5300-24GT4XS-E
24
N/A
4
1
1
1
Fixed
Power
Supply
RG-S5300-48GT4XS-E
48
N/A
4
1
1
1
Fixed
Power
Supply
RG-S5310-24GT4XS-P-
E
24 (PoE+ Capable)
N/A
4
1
1
1
Dual
Power
Supplies
RG-S5310-48GT4XS-P-
E
48 (PoE+ Capable)
N/A
4
1
1
1
Dual
Power
Supplies
This is a Class A product. In a domestic environment this product may cause radio interference. In this case, users are
advised to take proper measures against the interference.
An SFP+ port supports both 10GBase-R and 1000Base-X.
The PoE+ port is backward compatible with the PoE standard.
Management port: The management port is a 10/100/1000Base-T Ethernet port that uses an RJ-45 connector. This
port is connected to an Ethernet port of a PC with an Ethernet cable for program downloading. You can manage and
maintain the switch remotely by connecting the management port to the Ethernet port of a PC with an Ethernet cable.
USB port: The USB port is the interface into which you plug your USB storage device for online upgrade or log storage.
Console port: The console port is an RS-232 port that uses an RJ45 connector. The console port is used to connect a
PC directly to the management system for debugging, configuration, maintenance, management and program loading.
1.1 RG-S5300-24GT4XS-E
Specifications
Model
RG-S5300-24GT4XS-E
CPU
Dual-core CPU with the clock speed of 1.2 GHz

Hardware Installation and Reference Guide Product Overview
2
BOOTROM
16 MB
Flash Memory
2 GB
SDRAM
1 GB
SFP Module Type
SFP+ Port:
SFP Modules and SFP BIDI Modules
SFP+ Modules, SFP+ Cables and SFP+ BIDI Modules.
See Chapter 7 for details.
The module types may update without prior notification. Please contact Ruijie Networks
for details.
Built-in Power Supply
AC Input
Rated Voltage Range: 100 V AC to 240 V AC
Maximum Voltage Range: 90 V AC to 264 V AC
Frequency: 50 Hz/60 Hz
Rated Current Per Circuit: 1.5 A
SFP+ Port
10GBase-R Capable
1000Base-X Capable
RTC
Supported
PoE
Not supported
Power Consumption
< 40 W
Operating
Temperature
0ºC to 45ºC (32ºF to 113 ºF ) at a height below 1800 m (1.12 miles) above the sea level
At a height ranging from 1800 m (1.12 miles) to 5000 m (3.11 miles) above the sea level, the
maximum operating temperature decreases by 1°C (1.8°F) every time the altitude increases
by 220 m (721.78 ft.).
Storage Temperature
-40ºC to 70ºC (-40ºF to 158ºF )
Operating Humidity
10% to 90% RH (non-condensing)
Operating Height
0 to 5000 m (3.11 miles) above the sea level
Storage Humidity
5% to 95% RH (non-condensing)
Fan
Fan Speed Control
Fan Fault Alarming
Temperature
Alarming
Supported
EMI Certification
GB9254-2008CLASS A
Safety Regulation
Compliance
GB4943-2011
Dimensions
(W x D x H)
442 mm x 220 mm x 43.6 mm (17.40 in. x 8.66 in. x 1.72 in.)
Weight
2.7 kg (5.95 lbs.)
Appearance
The front panel of the RG-S5300-24GT4XS-E switch provides 24 10/100/1000Base-T Ethernet ports, four 10GE SFP+ ports,
one management port, one Console port and one USB port. The back panel has an AC power plug.

Hardware Installation and Reference Guide Product Overview
3
Figure 1-1 RG-S5300-24GT4XS-E Switch Appearance
Front Panel
Figure 1-2 Front Panel of RG-S5300-24GT4XS-E
1. System Status LED
2. Management Port LED
3. USB Port
4. Console Port
5. Management Port
6. 10/100/1000Base-T Ethernet Port
7. 10GE SFP+ Port
8. Port LED
Back Panel
Figure1-3 Back Panel of RG-S5300-24GT4XS-E
1. Grounding Stud
2. AC Power Plug
Power Supply
The RG-S5300-24GT4XS-E switch has a built-in power supply module. The back panel has an an AC power plug.
Cooling

Hardware Installation and Reference Guide Product Overview
4
The RG-S5300-24GT4XS-E switch adopts a left-to-right and front-to-right airflow to ensure normal operation. Maintain a
minimum clearance of 100 mm (3.94 in.) around the device for air circulation.
Figure 1-4 Airflow Direction
LED
Function
Panel ID
Color
Status
System Status LED
Status
Off
System is not powered on.
Blinking Green
(3 Hz)
System is being initialized. Continuous blinking
indicates a fault.
Blinking Green
(10 Hz)
System is being located.
Solid Green
System is operating normally.
Solid Yellow
The temperature at the air intake and exhaust
vents exceeds the threshold.
Solid Red
1. The temperature at the air intake and exhaust
vents well exceeds the threshold.
2. The system is not functioning properly.
Management Port LED
MGMT
Off
No link is detected for this port.
Solid Green
The port has made a successful 1000 Mbps link.
Blinking Green
The port is sending and receiving traffic at 1000
Mbps.
Solid Yellow
The port has made a successful 10/100 Mbps link.
Blinking Yellow
The port is sending and receiving traffic at 10/100
Mbps.
10GE SFP+ Port LED
25F to 28F
Off
No link is detected for this port.
Solid Green
The port has made a successful 1/10 Gbps link.
Blinking Green
The port is sending and receiving traffic at 1/10
Gbps.
10/100/1000Base-T
Ethernet Port LED
1F to 24F
Off
No link is detected for this port.
Solid Green
The port has made a successful 10/100/1000
Mbps link.
Blinking Green
The port is sending and receiving traffic at
10/100/1000 Mbps.

Hardware Installation and Reference Guide Product Overview
5
1.2 RG-S5300-48GT4XS-E
Specifications
Model
RG-S5300-48GT4XS-E
CPU
Dual-core CPU with the clock speed of 1.2 GHz
BOOTROM
16 MB
Flash Memory
2 GB
SDRAM
1 GB
SFP Module Type
SFP+ Port:
SFP Modules and SFP BIDI Modules
SFP+ Modules, SFP+ Cables and SFP+ BIDI Modules.
See Chapter 7 for details.
The module types may update without prior notification. Please contact Ruijie Networks
for details.
Built-in Power Supply
AC Input
Rated Voltage Range: 100 V AC to 240 V AC
Maximum Voltage Range: 90 V AC to 264 V AC
Frequency: 50 Hz/60 Hz
Rated Current Per Circuit: 2 A
SFP+ Port
10GBase-R Capable
1000Base-X Capable
RTC
Supported
PoE
Not Supported
Power Consumption
< 55 W
Operating
Temperature
0ºC to 45ºC (32ºF to 113 ºF ) at a height below 1800 m (1.12 miles) above the sea level
At a height ranging from 1800 m (1.12 miles) to 5000 m (3.11 miles) above the sea level, the
maximum operating temperature decreases by 1°C (1.8°F) every time the altitude increases
by 220 m (721.78 ft.).
Storage Temperature
-40ºC to 70ºC (-40ºF to 158ºF )
Operating Humidity
10% to 90% RH (non-condensing)
Operating Height
0 to 5000 m (3.11 miles) above the sea level
Storage Humidity
5% to 95% RH (non-condensing)
Fan
Fan Speed Control
Fan Fault Alarming
Temperature
Alarming
Supported
EMI Certification
GB9254-2008CLASS A
Safety Regulation
Compliance
GB4943-2011

Hardware Installation and Reference Guide Product Overview
6
Dimensions
(W x D x H)
442 mm x 220 mm x 43.6 mm (17.40 in. x 8.66 in. x 1.72 in.)
Weight
3 kg (6.61 lbs.)
Appearance
The front panel of the RG-S5300-48GT4XS-E switch provides 48 10/100/1000Base-T Ethernet ports, four 10GE SFP+ ports,
one management port, one Console port and one USB port. The back panel has an AC power plug.
Figure 1-5 RG-S5300-48GT4XS-E Switch Appearance
Front Panel
Figure 1-6 Front Panel of RG-S5300-48GT4XS-E
1. System Status LED
2. Management Port LED
3. USB Port
4. Console Port
5. Management Port
6. 10/100/1000Base-T Ethernet Port
7. 10GE SFP+ Port
8. Port LED
Back Panel
Figure 1-7 Back Panel of RG-S5300-48GT4XS-E