Ruijie RG-S5750-H Series Installation and operating manual

Ruijie RG-S5750-H Series Switches
Hardware Installation and Reference Guide
Document Version: V1.16
Date: 2023.09.06
Copyright © 2023 Ruijie
Networks

Copyright
Copyright © 2023 Ruijie Networks
All rights are reserved in this document and this statement.
Any reproduction, excerption, backup, modification, transmission, translation or commercial
use of this document or any portion of this document, in any form or by any means, without the
prior written consent of Ruijie Networks is prohibited.
Trademark and are owned by Ruijie Networks.
All other trademarks or registered trademarks mentioned in this document are owned by their
respective owners.
Disclaimer
The products, services, or features you purchase are subject to commercial contracts and
terms. Some or all of the products, services or features described in this document may not be
within the scope of your purchase or use. Unless otherwise agreed in the contract, Ruijie
Networks does not make any express or implied statement or guarantee for the content of this
document.
Due to product version upgrades or other reasons, the content of this document will be
updated from time to time. Ruijie Networks reserves the right to modify the content of the
document without any notice or prompt.
This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy and
will not shoulder any responsibility for losses and damages caused due to content omissions,
inaccuracies or errors.

I
Preface
Intended Audience
This document is intended for:
Network engineers
Technical support and servicing engineers
Network administrators
Technical Support
Ruijie Networks Website: https://www.ruijienetworks.com/
Technical Support Website: https://ruijienetworks.com/support
Case Portal: https://caseportal.ruijienetworks.com
Community: https://community.ruijienetworks.com
Technical Support Email: [e-mail]
Live Chat: https://www.ruijienetworks.com/rita
Conventions
1. Conversions
Convention
Description
Bold font
Commands, command options, and keywords are in bold
font.
Italic font
Arguments for which you supply values are in italic font.
[ ]
Elements in square brackets are optional.
{ x | y | z }
Alternative keywords are grouped in braces and separated
by vertical bars.
[ x | y | z ]
Optional alternative keywords are grouped in brackets and
separated by vertical bars.
&<1-n>
The argument before the sign (&) can be input for
consecutive 1- n times.
//
Double slashes at the beginning of a line of code indicate
a comment line.

II
2. Signs
The signs used in this document are described as follows:
Warning
An alert that calls attention to important rules and information that if not understood or followed
can result in data loss or equipment damage.
Caution
An alert that calls attention to essential information that if not understood or followed can result
in function failure or performance degradation.
Note
An alert that contains additional or supplementary information that if not understood or
followed will not lead to serious consequences.
Specification
An alert that contains a description of product or version support.
3. Note
The manual offers configuration information (including model, port type and command line
interface) for indicative purpose only. In case of any discrepancy or inconsistency between the
manual and the actual version, the actual version prevails.

Hardware Installation and Reference Guide Product Overview
1
1 Product Overview
Ruijie RG-S5750H series switches are the next-generation Layer 3 switches. Featuring high performance,
reliable security, and multiple services, RG-S5750H series switches are mainly applicable to the
convergence layer of large-scale networks to provide full line-rate exchanging. Complete QoS features
differentiate services according to business needs to ensure the prompt transmission of key data. The
RG-S5750H series switches provide various interfaces to meet the requirement for interfaces in network
constructions.
RG-S5750H Series Switches
Model
10/100/100
0
Base-T
Ethernet
Port
1000M
SFP
Port
10G
SFP+
Port
MGM
T
Port
US
B
Por
t
Min
i
US
B
Por
t
Consol
e Port
Expansi
on
Module
Slot
RPS
RG-S5750C-
28GT4XS-H
28
4
(4
Combo)
4
1
1
1
1
2
Dual
RG-S5750C-
48GT4XS-H
48
N/A
4
1
1
1
1
2
Dual
RG-S5750C-
28SFP4XS-H
8
28
(8
combo)
4
1
1
1
1
2
Dual
RG-S5750C-
48SFP4XS-H
N/A
48
4
1
1
1
1
2
Dual
RG-S5750-
48GT4XS-HP-
H
48
N/A
4
1
1
1
1
N/A
Dual
RG-S5750-
24GT4XS-HP-
H
24
N/A
4
1
1
N/A
1
N/A
Dual
Combo port consists of one 1000Base-X SFP port and one10/100/1000Base-T Ethernet port. That
is, only one port of them is available at a particular time.
SFP+ port supports both 10Gbase-R and 1000base-X.
RG-S5750-24GT4XS-HP-H will be delivered with two RG-M5000E-AC500P modules by default.
RG-S5750H series switches have the following external ports:
MGMT port: This port is a 10/100/1000M management port. It is used to connect with an Ethernet
port of a PC to perform program. It also supports Data Center Manageability Interface (DCMI)

Hardware Installation and Reference Guide Product Overview
2
protocol, and users can do remote management and maintenance for the switch through the port.
Use standard network cables when the port is connected with an Ethernet port.
USB port: The Universal Serial Bus (USB) port is used to connect with USB memory to save logs,
host versions, warnings and other diagnostic messages.
Console port: This port applies RS-232 interface electrical level and standard RJ45 connectors. It
is used to connect the serial ports of the terminal PC to perform tasks including system
commissioning, configuration, maintenance, management, and software loading.
Mini USB port: This port can be used as a serial port for installing the software driver. For detail,
see Appendix F.
The RG-S5750H series supports both Console and Mini USB ports to conduct commissioning,
configuration, maintenance, management, and software loading. However, these functions are
activated on only one of them at a particular time.
The RG-S5750H series switch is a class A product. In a domestic environment, this product may
cause radio interference in which case the user may be required to take adequate measures.
1.1 RG-S5750C-28GT4XS-H
Technical Specifications
Model
RG-S5750C-28GT4XS-H
CPU
Dual-core with each 1.0 GHz
BOOTROM
8 MB
Flash Memory
512 MB
SDRAM
1 GB
Optical Module
See Appendix B.
The supported module type may update without prior notification. Consult
Ruijie Networks for the latest information.
Expansion
Module Slot
2 slots
Power Module
Slot
2 slots
Supported power module: RG-PA70I
AC input:
Rated voltage: 100V to 240V
Maximum voltage: 90V to 264V
Frequency: 50/60 Hz
Rated current per input: 2A
HVDC input:
Rated voltage: 240VDC

Hardware Installation and Reference Guide Product Overview
3
Maximum voltage: 192V to 288V
Rated current per input: 2A
The HVDC input of the RG-PA70I power module is only applicable to the
Chinese region.
Supported power module: RG-PD70I
DC input:
Rated voltage: -36V to -72V
Rated current per input: 3.15A
The RG-PD70I power module is only suitable for use in the Chinese region.
SFP Port
1000Base-X
100Base-X
SFP+ Port
10GBase-R
1000Base-X
Power
Consumption
<45W (without expansion modules)
Temperature
Operating temperature: 0 ºC to 50ºC
Storage temperature: -40 ºC to 70ºC
Humidity
Operating humidity: 10% to 90% RH
Storage humidity: 5% to 95% RH
Altitude
0 to 5000m
Fan
Speed adjustment and fault alarm
Temperature
Alarm
Supported
EMI Standard
GB/T 9254.1
Safety
Standard
GB 4943.1
Dimensions
(W x D x H)
440 mm x 280 mm x 44 mm
Weight
3.9 kg
Product Appearance
The RG-S5750C-28GT4XS-H Ethernet switch provides 28 10/100/1000Base-T Ethernet ports, 4 GE
SFP combo ports, 4 10GE SFP+ ports, 1 MGMT port, 1 USB port, 1 Mini USB port, and 1 Console port
on the front panel, as well as 2 power module slots and 2 expansion module slots on the back panel
(The Console and Mini USB ports are a combo Console port. When they are connected meanwhile, the
Mini USB port takes the precedence).
Figure 1-1 Appearance of RG-S5750C-28GT4XS-H

Hardware Installation and Reference Guide Product Overview
4
Front Panel
Figure 1-2 Front Panel of RG-S5750C-28GT4XS-H
Note:
1. System status LED
2. Power status LED (PWR1)
3. Power status LED (PWR2)
4. MGMT port status LED
5. Console port
6. 10/100/1000 Base-T Ethernet port
7. Switch port status LED
8. USB port
9. Mini USB port
10. MGMT port
11. GE SFP port
12. 10GE SFP+ port
Back Panel
Figure 1-3 Back Panel of RG-S5750C-28GT4XS-H
Note:
1. Grounding stud
2. Expansion module slot 1
3. Expansion module slot 2
4. Power module slot 1
5. Power module slot 2
Power Supply

Hardware Installation and Reference Guide Product Overview
5
RG-S5750C-28GT4XS-H supports 2 power modules. For details, see the section “Power Modules”.
Dual-power input: The switch can be powered by one power module, or two power modules. When both
two modules are available, the switch is powered in current sharing mode.
When the switch is powered by the dual-power modules, if the system working power is greater
than the capacity of single power module, power redundancy cannot work; if one power module
fails, the switch system will be affected.
Heat Dissipation
The RG-S5750C-28GT4XS-H is designed with left and right fans for heat dissipation, thereby ensuring
the normal function of the device in the specified environment. Maintain a minimum clearance of 10cm
around the chassis to allow air circulation.
Figure 1-4 Flow Scheme of Heat Dissipation
LED
LED
Panel
Identification
State
Meaning
System status
LED
Status
Off
The switch is not receiving power.
Blinking green
(3 Hz)
The switch is being initialized with 3Hz
blinking.
Continuous blinking indicates errors.
Blinking green
(10Hz)
Supports remote on/off to locate the
switch.
Solid green
The switch is operational.
Solid yellow
Temperature alarm:

Hardware Installation and Reference Guide Product Overview
6
LED
Panel
Identification
State
Meaning
1. Temperature of inlet/outlet air
exceeds the normal operating
temperature range.
2. The power supplies cannot support
the whole system.
Check the working environment of the
switch and power supplies immediately.
Solid red
The switch is faulty. For details, see the
chapter “Troubleshooting”.
Power status LED
PWR1/PWR2
Off
The power module is not in place or not
receiving power.
Solid green
The power module is connected and
can supply power.
Solid yellow
The power model is identified but not
recognized.
Solid red
The redundant power is faulty or the
AC power cord is not connected.
MGMT port status
LED
MGMT
Off
The port is not connected.
Solid green
The port is connected at 1000 Mbps.
Blinking green
The port is receiving or transmitting
traffic at 1000 Mbps.
Solid yellow
The port is connected at 10/100 Mbps.
Blinking yellow
The port is receiving or transmitting
traffic at 10/100 Mbps.
10GE SFP+ port
status LED
29F-32F
Off
The port is not connected.
Solid green
The port is connected at 1/10 Gbps.
Blinking green
The port is receiving or transmitting
traffic at 1/10 Gbps.
GE SFP port
status LED
25F-28F
Off
The port is not connected.
Solid green
The port is connected at 1000 Mbps.
Blinking green
The port is receiving or transmitting
traffic at 1000 Mbps.
Solid yellow
The port is connected at 100 Mbps.
Blinking yellow
The port is receiving or transmitting
traffic at 100 Mbps.
10/100/1000Base-
T Ethernet port
status LED
1-28
Off
The port is not connected.
Solid green
The port is connected at 1000 Mbps.
Blinking green
The port is receiving or transmitting
traffic at 1000 Mbps.
Solid yellow
The port is connected at 10/100 Mbps.
Blinking yellow
The port is receiving or transmitting
traffic at 10/100 Mbps.

Hardware Installation and Reference Guide Product Overview
7
1.2 RG-S5750C-48GT4XS-H
Technical Specifications
Model
RG-S5750C-48GT4XS-H
CPU
Dual-core with each 1.0 GHz
BOOTROM
8 MB
Flash Memory
512 MB
SDRAM
1 GB
Optical Module
See Appendix B.
The supported module type may update without prior notification. Consult
Ruijie Networks for the latest information.
Expansion
Module Slot
2 slots
Supported expansion module:
M5000H-04XS (for expansion module slot 1)
If expansion module slot 1 is installed with the M5000H-04XS module,
expansion module sot 2 does not support any expansion modules.
Power Module
Slot
2 slots
Supported power modules: RG-PA70I
AC input
Rated voltage: 100V to 240V
Maximum voltage: 90V to 264V
Frequency : 50/60 Hz
Rated current per input: 2A
HVDC input
Rated voltage: 240V
Maximum voltage: 192V to 288V
Rated current per input: 2A
The HVDC input of the RG-PA70I power module is only applicable to the
Chinese region.
Supported power module: RG-PD70I

Hardware Installation and Reference Guide Product Overview
8
DC input:
Rated voltage: -36V to -72V
Rated current per input: 3.15A
The RG-PD70I power module is only suitable for use in the Chinese region.
SFP Port
Not supported
SFP+ Port
10GBase-R
1000Base-X
Power
Consumption
<45W (without expansion modules)
Temperature
Operating temperature: 0 ºC to 50ºC
Storage temperature: -40 ºC to 70ºC
Humidity
Operating humidity: 10% to 90% RH
Storage humidity: 5% to 95% RH
Altitude
0 to 5000m
Fan
Speed adjustment and fault alarm
Temperature
Alarm
Supported
EMI Standard
GB/T 9254.1
Safety
Standard
GB 4943.1
Dimensions
(W x D x H)
440 mm x 300 mm x 44 mm
Weight
4.2 kg
Product Appearance
The RG-S5750C-48GT4XS-H Ethernet switch provides 48 10/100/1000Base-T Ethernet ports, 4 10GE
SFP+ ports, 1 MGMT port, 1 USB port, 1 Mini USB port, and 1 Console port on the front panel, as well
as 2 power module slots and 2 expansion module slots on the back panel (The Console and Mini USB
ports are a combo Console port. When they are connected meanwhile, the Mini USB port takes the
precedence).
Figure 1-5 Appearance of RG-S5750C-48GT4XS-H

Hardware Installation and Reference Guide Product Overview
9
Front Panel
Figure 1-6 Front Panel of RG-S5750C-48GT4XS-H
Note:
1. System status LED
2. Power status LED (PWR1)
3. Power status LED (PWR2)
4. MGMT port status LED
5. Console port
6. 10/100/1000Base-T Ethernet port
7. Switch port status LED
8. USB port
9. Mini USB port
10. MGMT port
11. 10GE SFP+ port
Back Panel
Figure 1-7 Back Panel of RG-S5750C-48GT4XS-H
Note:
1. Grounding stud
2. Expansion module slot 1
3. Expansion module slot 2
4. Power module slot 1
5. Power module slot 2
Power Supply

Hardware Installation and Reference Guide Product Overview
10
The RG-S5750C-48GT4XS-H supports two power modules. For details, see the section “Power
Modules”.
Dual-power input: The switch can be powered by one power module, or two power modules. When both
two modules are available, the switch is powered in current sharing mode.
When the switch is powered by the dual-power modules, if the system working power is greater
than the capacity of single power module, power redundancy cannot work; if one power module
fails, the switch system will be affected.
Heat Dissipation
RG-S5750C-48GT4XS-H adopts left and right fans for heat dissipation, thereby ensuring the normal
function of the device in the specified environment. Sufficient space (10 cm distance from both sides
and the back panel of the cabinet) should be reserved around the cabinet to allow air circulation.
Figure 1-8 Flow Scheme of Heat Dissipation
LED
LED
Panel
Identification
State
Meaning
System status
LED
Status
Off
The switch is not receiving power.
Blinking green
(3 Hz)
The switch is being initialized with 3Hz
blinking.
Continuous blinking indicates errors.
Blinking green
(10Hz)
Supports remote on/off to locate the
switch.
Solid green
The switch is operational.
Solid yellow
Temperature alarm:

Hardware Installation and Reference Guide Product Overview
11
LED
Panel
Identification
State
Meaning
1. Temperature of inlet/outlet air
exceeds the normal operating
temperature range.
2. The power supplies cannot support
the whole system.
Check the working environment of the
switch and power supplies immediately.
Solid red
The switch is faulty. For details, see the
chapter “Troubleshooting”.
Power status LED
PWR1/PWR2
Off
The power module is not in place or not
receiving power.
Solid green
The power module is connected and
can supply power.
Solid red
The redundant power is faulty or the
AC power cord is not connected.
MGMT port status
LED
MGMT
Off
The port is not connected.
Solid green
The port is connected at 1000 Mbps.
Blinking green
The port is receiving or transmitting
traffic at 1000 Mbps.
Solid yellow
The port is connected at 10/100 Mbps.
Blinking yellow
The port is receiving or transmitting
traffic at 10/100 Mbps.
10GE SFP+ port
status LED
49F-52F
Off
The port is not connected.
Solid green
The port is connected at 1/10 Gbps.
Blinking green
The port is receiving or transmitting
traffic at 1/10 Gbps.
10/100/1000Base-
T Ethernet port
status LED
1-48
Off
The port is not connected.
Solid green
The port is connected at 1000 Mbps.
Blinking green
The port is receiving or transmitting
traffic at 1000 Mbps.
Solid yellow
The port is connected at 10/100 Mbps.
Blinking yellow
The port is receiving or transmitting
traffic at 10/100 Mbps.
1.3 RG-S5750C-28SFP4XS-H
Technical Specifications
Model
RG-S5750C-28SFP4XS-H
CPU
Dual-core with each 1.0 GHz

Hardware Installation and Reference Guide Product Overview
12
BOOTROM
8 MB
Flash Memory
512 MB
SDRAM
1 GB
Optical Module
See Appendix B.
The supported module type may update without prior notification. Consult the
Ruijie Networks for the latest information.
Expansion
Module Slot
2 slots
Power Module
Slot
2 slots
Supported power module: RG-PA70I
AC input:
Rated voltage: 100V to 240V
Maximum voltage: 90V to 264V
Frequency: 50/60 Hz
Rated current per input: 2 A
HVDC input:
Rated voltage: 240V
Maximum voltage: 192V to 288V
Rated current per input: 2A
The HVDC input of the RG-PA70I power module is only applicable to the
Chinese region.
Supported power module: RG-PD70I
DC input:
Rated voltage: -36V to -72V
Rated current per input: 3.15A
The RG-PD70I power module is only suitable for use in the Chinese region.
SFP Port
100Base-X
1000Base-X
SFP+ Port
10GBbase-R
1000Base-X
Power
Consumption
<55W (without expansion modules)
Temperature
Operating temperature: 0 ºC to 50ºC

Hardware Installation and Reference Guide Product Overview
13
Storage temperature: -40ºC to 70ºC
Humidity
Operating humidity: 10% to 90% RH
Storage humidity: 5% to 95% RH
Altitude
0 to 5000m
Fan
Speed adjustment and fault alarm
Temperature
Alarm
Supported
EMI Standard
GB/T 9254.1
Safety
Standard
GB 4943.1
Dimensions
(W x D x H)
440 mm x 300 mm x 44 mm
Weight
4.2kg
Product Appearance
The RG-S5750C-28SFP4XS-H Ethernet switch provides 28 GE SFP ports, 8 10/100/1000Base-T GE
combo ports, 4 10GE SFP+ ports, 1 MGMT port, 1 USB port, 1 Mini USB port, and 1 Console port on
the front panel, as well as 2 power module slots and 2 expansion module slots on the back panel.
Figure 1-9 Appearance of RG-S5750C-28SFP4XS-H
Front Panel
Figure 1-10 Front Panel of RG-S5750C-28SFP4XS-H

Hardware Installation and Reference Guide Product Overview
14
Note:
1. System status LED
2. Power status LED (PWR1)
3. Power status LED (PWR2)
4. MGMT port status LED
5. Console port
6. 10/100/1000Base-T Ethernet port
7. GE SFP port
8. Switch port status LED
9. USB port
10.Mini USB port
11. MGMT port
12.10GE SFP+ port
Back Panel
Figure 1-11 Back Panel of RG-S5750C-28SFP4XS-H
Note:
1. Grounding stud
2. Expansion module slot 1
3. Expansion module slot 2
4. Power module slot 1
5. Power module slot 2
Power Supply
The RG-S5750C-28SFP4XS-H supports two power modules. For details, see the section “Power
Modules”.
Dual-power input: The switch can be powered by one power module, or two power modules. When both
two modules are available, the switch is powered in current sharing mode.
When the switch is powered by the dual-power modules, if the system working power is greater
than the capacity of single power module, power redundancy cannot work; if one power module
fails, the switch system will be affected.
Heat Dissipation
The RG-S5750C-28SFP4XS-H is designed with left and right fans for heat dissipation, thereby ensuring
the normal function of the device in the specified environment. Maintain a minimum clearance of 10 cm
around the device for proper air circulation.
Figure 1-12 Flow Scheme of Heat Dissipation

Hardware Installation and Reference Guide Product Overview
15
LED
LED
Panel
Identification
State
Meaning
System status
LED
Status
Off
The switch is not receiving power.
Blinking green
(3 Hz)
The switch is being initialized with 3Hz
blinking.
Continuous blinking indicates errors.
Blinking green
(10Hz)
Supports remote on/off to locate the
switch.
Solid green
The switch is operational.
Solid yellow
Temperature alarm:
1. Temperature of inlet/outlet air
exceeds the normal operating
temperature range.
2. The power supplies cannot support
the whole system.
Check the working environment of the
switch and power supplies immediately.
Solid red
The switch is faulty. For details, see the
chapter “Troubleshooting”.
Power status LED
PWR1/PWR2
Off
The power module is not in place or not
receiving power.
Solid green
The power module is in place and can
supply power.
Solid red
The redundant power is faulty or the
AC power cord is not connected.

Hardware Installation and Reference Guide Product Overview
16
LED
Panel
Identification
State
Meaning
MGMT port status
LED
MGMT
Off
The port is not connected.
Solid green
The port is connected at 1000 Mbps.
Blinking green
The port is receiving or transmitting
traffic at 1000 Mbps.
Solid yellow
The port is connected at 10/100 Mbps.
Blinking yellow
The port is receiving or transmitting
traffic at 10/100 Mbps.
10GE SFP+ port
status LED
29F-32F
Off
The port is not connected.
Solid green
The port is connected at 1/10 Gbps.
Blinking green
The port is receiving or transmitting
traffic at 1/10 Gbps.
GE SFP port
status LED
1F-28F
Off
The port is not connected.
Solid green
The port is connected at 1000 Mbps.
Blinking green
The port is receiving or transmitting
traffic at 1000 Mbps.
Solid yellow
The port is connected at 100 Mbps.
Blinking yellow
The port is receiving or transmitting
traffic at 100 Mbps.
10/100/1000Base-
T Ethernet port
status LED
1-8
Off
The port is not connected.
Solid green
The port is connected at 1000 Mbps.
Blinking green
The port is receiving or transmitting
traffic at 1000 Mbps.
Solid yellow
The port is connected at 10/100 Mbps.
Blinking yellow
The port is receiving or transmitting
traffic at 10/100 Mbps.
1.4 RG-S5750C-48SFP4XS-H
Technical Specifications
Model
RG-S5750C-48SFP4XS-H
CPU
Dual-core with each 1.0 GHz
BOOTROM
8 MB
Flash Memory
512 MB
SDRAM
1 GB
Optical Module
See Appendix B.
The supported module type may update without prior notification. Consult the
Ruijie Networks for the latest information.