Ruijie Reyee RG-ES106D-P V2 User manual

To better use the Ruijie device,
read this manual before installation and usage,
and save the manual for future reference.
User Manual
RG-ES106D-P V2

1
Package Contents
Item Quantity
RG-ES106D-P V2 Switch 1
Desiccant Bag 1
Power Adapter (1.2 m/3.94 ft) 1
KA3 x 25 mm Screw 2
Expansion Anchor 2
User Manual 1
Log in to the official website of Ruijie Networks (https://www.ruijienetworks.com) and enter
the corresponding product category to find the product and download the related
documentation.
1. Tabletop or Workbench Mounting
Step 1 Take out the switch from the packing materials.
Step 2 Place the switch on the tabletop or workbench and maintain a certain clearance
around the switch to ensure proper ventilation.
User Manual
Installation

2
2. Wall Mounting
Step 1 Take out two expansion anchors and two screws from the packing materials.
Step 2 Drill two holes on the wall. The holes should be level with each other and their
centers should be 112.6 mm (4.43 in) apart. Hammer the two expansion anchors into the
holes, and drive two screws into the expansion anchors.
Step 3 Place the two keyholes on the back of the switch over the two screws mounted on
the wall, and pull the switch down slightly to hang it on the screws.
Network Configuration
Connect the switch according to your networking needs. The switch does not need any
configuration after being connected.
Power Supply
PC
Printer
IP Camera
PoE Powered Device
Grounding Cable
IP TelephoneAP

3
②① ③ ④ ⑤
1. System Status LED
2. DIP Switch
3. 10/100Base-T Self-adaptive Ethernet
ports (Ports 1 to 4 are PoE ports)
4. 10/100Base-T Link/Act LED
5. PoE Status LED
LEDs and Ports
Specifications
Model
RG-ES106D-P V2
Standard & Protocol IEEE802.3i, IEEE802.3u, IEEE802.3x,
IEEE802.3az, IEEE802.3at, IEEE802.3af
Port
Six 10/100 Mbps self-adaptive Ethernet Ports (Auto
MDI/MDIX).
Ports 1-4 support PoE power supply.
PoE
IEEE802.af-compliant and 802.3at-compliant
Maximum PoE/PoE+ output power: 54 W
Maximum PoE/PoE+ output power per port: 30 W
Switching Capacity
1.6 Gbps
Maximum Power Consumption
60.6 W
Operating Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
4- -0ºC to 70ºC ( 40°F to 158°F)
Operating Humidity
10% to 90% RH (non-condensing)
Storage Humidity
5% to 90% RH (non-condensing)

4
Working Mode
Standard mode: Flow control is enabled and all
ports can communicate with each other.
Flow Control Off mode: Flow control is disabled and
all ports can communicate with each other.
VLAN mode: Ports 1 to 4 cannot communicate with
each other but they can communicate with ports 5
and 6.
Dimensions (W x D x H) 140 mm x 67 mm x 26 mm (5.51 in. x 2.64 in. x 1.02
in.)
The device may cause radio interference in the living environment.
CE Mark warning