3
RYOBI 18 VOLT POWER HANDLE− MODEL NUMBER P246
1 201469016 Handle Housing Assembly..................................1
2 660815002 Screw (M3.5 x 13.5 mm, T10 Torx).....................2
3 660031011 Screw (M3.5 x 16 mm, T10 Torx)........................6
4 940488315 Data Label...........................................................1
5 562801001 Rubber Plug........................................................2
6 303001045 Magnet Assembly ...............................................1
7 562822001 Motor Cushion (B)...............................................2
8 562821002 Motor Cushion (A)...............................................2
9 562408002 Gear Cap ............................................................1
10 230381001 Motor Assembly..................................................1
11 520485001 Motor Mount .......................................................1
12 670028003 Spring Washer (OD5.7 x ID3.1 x .8t)...................2
13 660211006 Screw (M3 x 6 mm, Pan Hd.)..............................2
14 520483001 Release Button ...................................................2
15 692526001 Compression Spring...........................................2
16 304676001 Switch Trigger Stop Assembly ...........................1
17 692450001 Compression Spring...........................................1
18 270015228 Switch w/Circuit Board Assembly ......................1
19 523631001 Switch Trigger.....................................................1
20 523630001 Forward/Reverse Button.....................................1
21 940114191 Logo Label..........................................................1
Not Shown:
988000580 Operator's Manual ..............................................1
8-1-11
(REV:02)
The model number will be found on a label attached to the motor housing. Always mention the model number in all correspondence regarding
your POWER HANDLE or when ordering repair parts.
PARTS LIST
Key Part
No. Number Description Qty Key Part
No. Number Description Qty
