Ryobi R36XPWS20 User manual

FRONT PAGE
R36XPWS20
R36XPWS26

2
Original Instructions
IMPORTANT!
It is essential that you read the instructions
in this manual before assembling, operating,
and maintaining the product.
Subject to technical modication.
Safety, performance, and dependability have
been given top priority in the design of your
cordless high pressure cleaner.
INTENDED USE
The cordless high pressure cleaner is intended
only for outdoor use. For safety reasons, the
product must be adequately controlled by a
two-handed operation. The product should be
used in well-illuminated conditions.
The product is designed for home or domestic
use. It is intended to clean machines, vehicles,
buildings, oors, tools, facades, terraces,
oors, and concrete walkways by removal of
stubborn dirt using clean water with or without
cleaning detergent.
Do not use the product for any other purpose.
WARNING! The product is designed for
use with a neutral cleaning agent supplied or
recommended by the manufacturer. The use
of other cleaning agents or chemicals may
adversely a󰀨ect the safety of the product. If
using detergent, refer to the Material Safety
Data Sheet of the detergent.
GENERAL SAFETY WARNINGS
WARNING! Read all safety warnings and
all instructions. Failure to follow the warnings
and instructions may result in electric shock,
re, and/or serious injury.
■The product is not intended for use by
children or persons with reduced physical,
sensory, or mental capabilities, or lack of
experience and knowledge. Children should
be adequately supervised to ensure that
they do not play with the product.
■Wear a complete personal protective
equipment when operating the product,
such as boots, safety gloves, safety helmets
with visor, and hearing protection. Use
high-impact visors only with liquid splash
protection.
■To reduce the risk of injury, keep children
and bystanders away. All bystanders should
wear safety glasses and be kept at a safe
distance from the work area.
■Ensure that the safety devices are in good
working condition. Make sure that all safety
devices are operating properly before each
use.
■Do not use the product if the important parts
are damaged, such as safety devices or
spray wand.
WARNING! During use of high pressure
cleaners, aerosols may be formed. Inhalation
of aerosols can be hazardous to health.
Depending on the application, shielded nozzles
can be used for high pressure cleaning, which
will reduce the emission of hydrous aerosols.
However, not all applications allow the use
of such a device. If shielded nozzles are not
applicable for the protection against aerosols,
a respiratory mask of class FFP 2 or equivalent
may be needed, depending on the cleaning
environment.
WARNING! Do not turn the nozzle while
pulling the trigger. If the water is owing while
the nozzle is turned, the relief channel releases
the water. This is not a leak, but allows the
water to escape without damaging the tool.
■High pressure jets can be dangerous if
misused. Do not direct the jet to people, live
electrical equipment, or the product itself.
■To avoid a risk of explosion, do not spray
ammable liquids.
■Do not direct the jet against yourself or
others to clean clothes or footwear.
■Do not use the product to clean electronic
devices, clothes, or footwear.
■High pressure hoses, ttings, and couplings
are important for the safety of the product.
Use only hoses, ttings, and couplings
recommended by the manufacturer.
CAUTION! The product must not be used
on the drinking water supply without a backow
preventer being installed that corresponds to
EN 12729 Type BA. Water owing through a
backow preventer is considered nondrinkable
Always observe the regulations of your local
water utility company when connecting the
product to a water supply line.
BATTERY PACK SAFETY WARNINGS
■Recharge the battery pack only with the
charger specified by the manufacturer.
A charger that is suitable for one type of

3
Original Instructions
battery pack may create a risk of fire when
used with another battery pack.
■When the battery pack is not in use, keep
it away from other metal objects, such as
paper clips, coins, keys, nails, screws, or
other small metal objects that can make a
connection from one terminal to another.
Shorting the battery pack terminals may
cause burns or a fire.
■Keep the battery pack and the charger away
from wet and damp conditions.
■Use the product only with battery packs
specified in this manual. Use of any other
battery packs may create a risk of injury and
fire.
■Under abusive conditions, liquid may be
ejected from the battery pack; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, seek medical
help. Liquid ejected from the battery pack
may cause irritation or burns.
■Do not dispose of battery packs together
with household waste material. They must
be collected separately and returned to
an environmentally compatible recycling
facility. Check with your local authority or
retailer for recycling advice and collection
point
ADDITIONAL SAFETY WARNINGS
■Some regions have regulations that restrict
the use of the product in some operations.
Check with your local authority for advice.
■Before each use, check the product for
damage. A damaged high-pressure hose
must be replaced immediately. Ensure that
all connections, such as high-pressure hose
and nozzle, are secure. Unwind the hose
properly so that they may not get twisted or
kinked.
■Do not allow children or untrained individuals
to use the product.
■Before starting any cleaning operation,
close doors and windows. Clear the area to
be cleaned of debris, toys, outdoor furniture,
or other objects that could create a hazard.
■Never pick up or carry the product while the
motor is running.
■Do not use the product in temperatures
below 0°C.
■Do not use acids, alkalines, solvents,
flammable material, bleaches, or industrial
grade solutions in the product. These
products can cause physical injuries to the
operator and irreversible damage to the
product.
■Always operate the product on a level
surface.
WARNING! High pressure jet can be
dangerous if subject to misuse. The jet must
not be directed to people, animals, electrical
devices, or the product itself.
■Hold the trigger handle securely with both
hands. Expect the trigger handle to move
when the trigger is pulled due to reaction
forces. Failure to do so could cause loss of
control and injury to yourself and others.
■Make sure that the air in the hose and pump
is released before you turn on the product.
To remove the air in the hose and pump,
connect the water supply to the pump using
a garden hose, connect the trigger handle
to the pump using the high-pressure hose,
disengage the trigger handle lock, and
press the trigger until there is a steady flow.
■Exercise caution to avoid slipping or falling.
■Keep firm footing and balance. Do not
overreach. Overreaching can result in loss
of balance.
■Use only accessories that are recommended
by the manufacturer. The use of improper
accessories may cause injury.
■Never leave the product running unattended.
Turn off the product. Do not leave the
product until it comes to a complete stop.
■Be familiar with the controls. Know how to
turn off the product and bleed the pressure
quickly.
■Stay alert, and exercise control. Watch what
you are doing, and use common sense.
■Do not use the product while tired, ill, or
under the influence of drugs, alcohol, or
medication. A moment of inattention while
operating the product may result in serious
personal injury.
■Do not use the product if the switch does not
turn it on and off. Any product that cannot
be controlled with a switch is dangerous
and must be repaired.
■Keep a minimum distance of 30 cm when
cleaning vehicles. The high pressure jet
may damage or burst vehicle tires and/or
tire valves.

4
Original Instructions
■Injuries may be caused, or aggravated, by
prolonged use of the product. When using
the product for prolonged periods, ensure to
take regular breaks.
ADDITIONAL BATTERY SAFETY
WARNINGS
To reduce the risk of re, personal injury,
and product damage due to a short circuit,
never immerse the product, battery pack, or
charger in uid or allow uid to ow inside
them. Corrosive or conductive uids, such as
seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc., can
cause a short circuit.
TRANSPORTATION AND STORAGE
■Mind the weight of the product when
selecting the storage location and during
transportation to prevent accidents or
injuries.
■Turn off the product, remove the battery
pack, and allow both to cool down.
Disconnect the product from the water
supply before storing or transporting. Never
place the product in any position other than
upright.
■Remove water from all hoses and the pump,
and empty the detergent tank before storing
the product.
■Remove all foreign materials from the
product. Store the product in a cool, dry, and
well-ventilated place that is inaccessible
to children. Keep the product away from
corrosive agents such as garden chemicals
and de-icing salts. Do not store the product
outdoors.
■For transportation in a vehicle, secure the
product against movement or falling to
prevent injury to persons or damage to the
product.
TRANSPORTING LITHIUM BATTERIES
Transport the battery pack in accordance with
local and national provisions and regulations.
Follow all special requirements on packaging
and labelling when transporting batteries by a
third party. Ensure that no batteries can come
in contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
batteries that are cracked or leaking. Check
with the forwarding company for further advice.
MAINTENANCE
■Use only original manufacturer’s
replacement parts, accessories, and
attachments. Failure to do so can cause
possible injury, can contribute to poor
performance, and may void your warranty.
■Servicing requires extreme care and
knowledge and should be performed only
by a qualified service technician. Have the
product serviced by an authorised service
centre only.
■Turn off the product, remove the battery
pack, and allow both to cool down. Make
sure that all moving parts have come to a
complete stop:
●before cleaning the product
●before maintaining the product
■You may make adjustments or repairs
described in this manual. For other repairs,
have the product serviced by an authorised
service centre only.
■Regularly inspect and maintain the product
for safe operation. RYOBI recommend
inspecting the product every 6 months.
■Check all nuts, bolts, and screws at frequent
intervals for proper tightness to ensure that
the product is in safe working condition. Any
part that is damaged should be properly
repaired or replaced by an authorised
service centre.
SAFETY DEVICES
■Handle grip
–The handle grip has a gripping surface
that provides added control of the spray
wand and helps reduce fatigue.
■Lock-out button
–The lock-out button locks the switch
trigger and prevents unintentional
opening of the high-pressure jet.

5
Original Instructions
SYMBOLS ON THE PRODUCT
Safety alert
Read and understand
all instructions before
operating the product. Follow
all warnings and safety
instructions.
Never point the gun to
human, animals, the product,
power supply or any electric
appliances.
Wear appropriate respiratory
mask.
Do not spray ammable
liquids to avoid the risk
of explosion. Flammable
liquids and their vapours are
explosive and can cause
severe burns or death.
Kickback. To reduce the risk of
injury from kickback, hold the
trigger handle securely with
both hands when the product
is on.
Failure to use the product in
dry conditions and to observe
safe practices can result in
electric shock.
Do not direct spray at any
person or animal to avoid
the risk of injection or severe
injury.
The product is not suitable for
a connection to the drinking
water supply without backflow
preventer.
Do not expose the product to
rain or damp conditions.
Regulatory Compliance
Mark (RCM). Product
meets applicable regulatory
requirements.
Waste electrical products
should not be disposed of
with household waste. Please
recycle where facilities exist.
Check with your local authority
or retailer for recycling advice.
SYMBOLS IN THIS MANUAL
Parts or accessories sold
separately
Note
Warning

6

7
Know your product
R36XPWS20
x4
R36XPWS26
Battery cover
Power select
Wand
Handle
Gun
Trigger gun lock
Trigger
On/off switch
Hose strap
Water inlet
Wheel
Detergent tank cap
Water outlet
Detergent tank
Detergent nozzle
Turbo nozzle
Water inlet adapter
15-degree nozzle
High pressure hose
Siphon hose
Battery pack
Detergent
Charger
Operator’s manual
Quick connector
Floater
Filter
Screw

8
Getting started
1
2
1 2 3
1
2
1
2
2
1
2
7
12
8
13
9
14
Connect the high pressure hose to the
gun inlet coupler. Turn the hose collar
clockwise to secure the hose.
Open the battery cover.
Connect the collar of the high pressure
hose to the threaded nipple on the
pump. Turn the collar clockwise to
tighten the hose securely to the pump.
Insert the battery pack until the latch
clicks into place.
Connect the inlet coupler to the water
inlet port. Turn the coupler clockwise to
tighten and secure it in place.
Close the battery cover.
Wear full eye and ear protection,
protective gloves, substantial footwear,
and long trousers at all times while
operating the product. Do not operate
the product when barefoot or wearing
open sandals.
Insert the handle into the wheel
assembly until it clicks into place.
Secure the handle using the screws.
Attach the handle and wheel assembly
to the product.
NOTE: Align and insert the tabs on the
handle and wheel assembly into the
slots on the product.

9
Getting started
15
Press the on/o󰀨 switch to the on
position to turn on the product.
1
2
4 5
1
2
6
1
2
3
4
30 sec
1
2
10 11
Unlatch the trigger gun lock. Press the
trigger for 30 seconds to release air
pressure within the product until water
ows normally.
Pull down the quick connector and insert it into the water inlet. Push the quick
connector to secure the siphon hose. Place the other end of the siphon hose with
the oater and lter into the water container.
Attach the handle cover using screws. Push the preferred nozzle into the
quick-connect collar of the wand until
the nozzle clicks into place and is
secured properly.
Connect the threaded end of the
wand to the gun. Turn the connector
clockwise to secure the wand.
12
7
1
2
2
1
16
Unlatch the trigger gun lock. Squeeze
the trigger to operate the product.
NOTE: Hold the product with both
hands to start operating the product.

10
p.12 p.13p.11p.11
p.15p.14 p.16
Moving the product
Using the turbo
nozzle
Cleaning the
product
Using the detergent
nozzle
Using the siphon
hose
Using the
15-degree nozzle
Storing the product

11
Operation
1
2
3
1
2
3
1
2
USING THE TURBO NOZZLE
1. Pull back the quick-connect collar. Push
the turbo nozzle into the quick-connect
collar until it clicks into place and is
secured properly.
2. Squeeze the trigger to begin using the
product.
USING THE 15-DEGREE NOZZLE
1. Pull back the quick-connect collar. Push
the 15-degree nozzle into the quick-
connect collar until it clicks into place and
is secured properly.
2. Squeeze the trigger to begin using the
product.

12
Operation
1
2
1
1
2
3
2
2
1
3
4
USING THE DETERGENT NOZZLE
1. Pull back the quick-connect collar.
Remove the nozzle from the spray wand.
2. Pull back the quick-connect collar. Push
the detergent nozzle into the quick-
connect collar until it clicks into place and
is secured properly.
3. Open the detergent tank cap. Pour the
detergent into the detergent tank. Close
the detergent tank cap.
4. Squeeze the trigger to begin using the
product.
NOTE: In case of contact with leaking
detergent, rinse with water. For more
information, refer to the Material Safety Data
Sheet of the detergent.

13
Operation
1
1
2
1
2
3
4
3
USING THE SIPHON HOSE
1. Press the on/off switch to the off position.
2. Connect the inlet coupler to the water
inlet port. Turn the coupler clockwise to
tighten and secure it in place.
3. Pull down the quick connector and insert
it into the water inlet. Push the quick
connector to secure the siphon hose.
Place the other end of the siphon hose
with the oater and lter into the water
container.

14
Operation
1
2
1
2
1
2
3
4
MOVING THE PRODUCT
1. Press the latch on the battery pack and
remove the battery pack.
2. Push the handle release knob to unlock
the handle. Pull up the handle to adjust
the height until the handle release knob
clicks into place.
3. Tilt the product backwards before moving
the product.
4. Balance the product on the wheels and
roll the product to the intended location.

15
Maintenance
2
1
3
3
2
1
1
2
CLEANING THE PRODUCT
1. Turn off the product. Press the latch on
the battery pack and remove the battery
pack.
2. Clean the product with a stiff brush.
WARNING! Do not use water to clean the
product.

16
Storage
2
1
2
2
1
3
3
2
1
3
4
1
2
1
5
STORING THE PRODUCT
1. Remove the siphon hose with the oater
and lter from the water container.
2. Install the battery pack until the latch
clicks into place. Press the on/off switch
to the on position to turn on the product.
3. Press the trigger to release air pressure
within the system until no water flows out.
4. Turn off the product. Press the latch on
the battery pack and remove the battery
pack.
5. Pull the quick connector and disconnect
the siphon hose from the inlet coupler.

17
Storage
20220908v1
1
2
6
2
1
7
8
6. Turn the high pressure hose collar
counterclockwise and remove the hose
from the gun.
7. Remove the spray wand from the gun.
NOTE: Place the parts in their corresponding
storage slots.
8. Store the product in a cool, dry, and well-
ventilated place that is inaccessible to
children.

PRODUCT SPECIFICATIONS
Cordless high pressure cleaner
Model R36XPWS20 / R36XPWS26
Rated voltage 36 V d.c.
Dimension (L x W x H) 378 mm x 425 mm x 575 mm
Siphon hose length 3.0 m
Max. siphon hose inner diameter 8.3 mm
Maximum pressure 14.0 MPa (140 bar / 2030 psi)
Rated pressure (Performance) 12.4 MPa (124 bar / 1800 psi)
Rated pressure (Standard) 10.0 MPa (100 bar / 1450 psi)
Rated pressure (ECO) 6.0 MPa (60 bar / 870 psi)
Max. ow 6.2 L/min
Rated ow (Performance) 4.6 L/min
Rated ow (Standard) 4.1 L/min
Rated ow (ECO) 3.3 L/min
Weight 11.7 kg
Weight (with 2 heaviest battery
packs)
17 kg
IPX rating IPX5
Max. input water pressure 1.0 MPa (10 bar / 145 psi)
Max. input water temperature 40°C
Noise emission values determined according to IEC 60335-2-79
Annex CC
A-weighted sound pressure level L
PA
= 73.2 dB (A)
Uncertainty K
PA
= 3.0 dB
A-weighted sound power level L
WA
= 86.4 dB (A)
Uncertainty K
WA
= 3.0 dB
Guaranteed sound power level L
WA
+ K
WA
= 90 dB (A)
Vibration total values determined according to IEC 60335-2-79
Annex BB
Vibration emission value a
h
= 1.0 m/s2
Uncertainty K = 1.5 m/s2
BATTERY AND CHARGER
Model R36XPWS20 R36XPWS26
Battery pack -BPL3660D
Charger -R36CHA4A0
Compatible battery
packs
BPL3626D2, BPL3640D2, BPL3650D2,
BPL3660D, BPL3690D, BPL3612D,
R36BTY2, R36BTY4, R36BTY5, R36BTY6,
R36BTY8, R36BTY12
NOTE: Visit your local special orders desk or contact RYOBI
customer service for replacement parts.
WARNING! The declared vibration total
values and the declared noise emission values
given in this instruction manual have been
measured in accordance with a standardised
test and may be used to compare one tool with
another. They may be used for a preliminary
assessment of exposure.
The declared vibration and noise emission
values represent the main applications of the
tool. However, if the tool is used for di󰀨erent
applications, used with di󰀨erent accessories,
or poorly maintained, the vibration and noise
emission may di󰀨er. These conditions may
signicantly increase the exposure levels over
the total working period.
An estimation of the level of exposure to
vibration and noise should take into account
the times when the tool is turned o󰀨 or when
it is running idle. These conditions may
signicantly reduce the exposure level over
the total working period.
Identify additional safety measures to protect
the operator from the e󰀨ects of vibration and
noise, such as maintaining the tool and the
accessories, keeping the hands warm (in case
of vibration), and organising work patterns.

TROUBLESHOOTING
If these solutions do not solve the problem, contact an authorised service centre.
Problem Possible cause Solution
The product does not
start when the start
button is pressed.
The battery pack is not installed. Install the battery pack.
The battery charge is low. Recharge the battery pack.
There is high water pressure in the hose. Squeeze the trigger to relieve water pressure.
Pump does not
produce pressure.
There is inadequate water supply. Ensure that the tap is fully open when using a pressure washer.
The trigger handle leaks. Ensure that all connections are tightly secured. If leaking persists,
check O-rings as they could be cracked or damaged.
The nozzle is clogged. Clean the nozzle.
The pump is faulty. Contact an authorised service centre.
There is air in the hose. Ensure the product is turned o󰀨 and squeeze the trigger on the
trigger handle to remove air from the hose.
The water inlet lter is clogged or dirty. Remove the water inlet lter, rinse with warm water, then reinstall
the water inlet lter.
The product does not
reach high pressure.
The diameter of garden hose is too small. Replace with the 3/4 in. garden hose.
The water supply is restricted. Check garden hose for kinks, leaks, and blockages.
There is not enough inlet water. Open the water source in full force.
The hose is leaking. Replace the hose.
There is kink in the hose. Eliminate kinks in the hose.
There is no detergent.
The soap tank is empty. Add additional detergent to the tank.
The water supply is inadequate or
clogged.
Check the garden hose for kinks, leaks, and blockages.
The wrong nozzle is attached. Attach the blue or black soap nozzle.
The wand leaks. The O-ring needs to be replaced. Replace the O-ring. If this does not correct the problem, contact an
authorised service centre to purchase a new wand.

BACK PAGE
Imported by:
Techtronic Industries Australia Pty Ltd
31 Gilby Road, Mount Waverley, VIC 3149
Melbourne, Australia
Techtronic Industries N.Z. Limited
Unit C, 70 Business Parade South,
Highbrook, Auckland 2013, New Zealand
RYOBI is a trade mark of Ryobi Limited, and is used under license.
961479077-02