SAFAVIEH COUTURE Rumi SFV4704 User manual

CARE AND MAINTENANCE
NOTICE
Weight Capacity: 275 lbs
WARNING: DO NOTSTAND ON BENCH
WARNING: DO NOTOVER TORQUE BOLTS/SCREWS
DMetal Gasket(M6) 12X
BLEGS 4X
CSpring washer(M6) 12X
Part List and Hardware List
PIECE DESCRIPTION PICTURE
QUANTITY
SAFAVIEH
C O U T U R E
The legs and hardware are located underneath the
bench in the zipper compartment
EBolt(M6*30mm)12X
FAllen key 1X
ASEAT 1X
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening SFV4704
Dimensions:48.43"WX18.31"DX15.75"H

PREPARATION
STEP3 INSERT THE LEGS AND SCREW IN THE BOLTS
BUT DON'T TIGHTEN COMPLETELY. STEP4 CLOSE THE ZIPPER ON THE UNDERSIDE OFTHE
SEAT
The legs and hardware are located underneath the bench in the
zipper compartment.
STEP5 PUT THE BENCH UPRIGHT AND MAKE SURE ALL
LEGS ARE LEVEL, THEN FIRMLY TIGHTEN BOLTS WITH
ALLEN KEY WHILE THE BENCH IS UPRIGHT AS
PICTURED ABOVE(IF THE BENCH WOBBLY, YOU CAN
EASY ADJUST LEG BOTTOM PLASTIC SCREW)
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen key
STEP1 OPEN THE ZIPPER ON THE UNDERSIDE OF THE
SEAT AND TAKE OUT LEGS AND HARDWARE STEP2 PUT THE WASHERS ON THE BOLT IN THE ORDER SHOWN IN THE PICTURE
D C E
A
F
B
B
B
B
B
C
D
E