Safe Fleet Prime Design VBC NV200 User manual

PRIME DESIGN, A SAFE FLEET BRAND 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪ Phone: [phone] ▪ 1.8.PRIME.RACK ▪ Fax: [phone] ▪ Email:[email protected] ▪ www.primedesign.net
TM & © 2014 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6,092,972, 6,099,231, 6,202,807, 6,427,889, 6,764,268, 6,971,563 AND OTHER PATENTS PENDING
2
2
3
5
6
7
8
1
4
9
10
End Caps (4X)
Foam Gasket (6X)Nylon Washer (6X)
M8 Bolt (6X)
Channels (2X)
Flex Channel Connector (6X)Brackets (4X)
VBC-NV200 ASSEMBLY INSTRUCTIONS–PACKAGING CONTENTS
1—FBM-0045 ........................................................ (Qty 1)
Channels w/Hardware
CONTENTS OVERVIEW
2—Rear Crossbar Assembly.................................. (Qty 1)
3—Front Crossbar Assembly ................................. (Qty 1)
4—Handle Latch Assembly ................................... (Qty 1)
Clamp Down, Right Hand

PRIME DESIGN, A SAFE FLEET BRAND 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪ Phone: [phone] ▪ 1.8.PRIME.RACK ▪ Fax: [phone] ▪ Email:[email protected] ▪ www.primedesign.net
TM & © 2014 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6,092,972, 6,099,231, 6,202,807, 6,427,889, 6,764,268, 6,971,563 AND OTHER PATENTS PENDING
3
VBC-NV200 ASSEMBLY INSTRUCTIONS–PACKAGING CONTENTS
7—Quick Clamp Tube Splice Assembly ................ (Qty 1)
5.00“
9—HD Front Hook Assembly ................................. (Qty 1)
6—Clamp Down Tube ............................................ (Qty 1)
80.00”
8—Removeable Horn............................................. (Qty 1)
With Cap, 15.00”
5—Clamp Down Handle Assembly ....................... (Qty 1)
11—ASZ-0101........................................................ (Qty 1)
Anti-Seize (not shown)
10—Ladder Stop Assembly................................... (Qty 2)
1.75”

PRIME DESIGN, A SAFE FLEET BRAND 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪ Phone: [phone] ▪ 1.8.PRIME.RACK ▪ Fax: [phone] ▪ Email:[email protected] ▪ www.primedesign.net
TM & © 2014 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6,092,972, 6,099,231, 6,202,807, 6,427,889, 6,764,268, 6,971,563 AND OTHER PATENTS PENDING
4
Rear
Front
Left
Right
Rear
Front
Left
Right
Rear
Front
Left
Right
12.50”
Channel Front
3.25”
Channel Rear
Fig. 1
Nylon Spacer
Foam Gasket
Right Rear
72.00”
6–3/8”
Left Rear
72.00”
6–3/8”
FBM-0045
CHANNELS TO ROOF
Slide Channel Connectors
into Channels as shown
0.6 Loosen bolts
0.7 Set to distances then torque Rear Bracket nuts to 90 in-lbs
Install Channels into roof Channel groove as shown
0.3
Position Channels as
shown below in Fig.1
0.1
0.2
0.4 Install fasteners into factory
roof rail mounting locations.
0.5
Torque to 150 in-lbs
VBC-NV200 ASSEMBLY INSTRUCTIONS–FBM MOUNTINGS

PRIME DESIGN, A SAFE FLEET BRAND 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪ Phone: [phone] ▪ 1.8.PRIME.RACK ▪ Fax: [phone] ▪ Email:[email protected] ▪ www.primedesign.net
TM & © 2014 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6,092,972, 6,099,231, 6,202,807, 6,427,889, 6,764,268, 6,971,563 AND OTHER PATENTS PENDING
5
Rear
Front
1
1
2
3
4
5
6
Even EvenRear
Even EvenFront
VBC-NV200 ASSEMBLY INSTRUCTIONS–RIGHT SIDE CLAMP DOWN
RIGHT CLAMP DOWN
ASSEMBLY SEQUENCE
CROSSBARS CROSSBAR ADJUSTMENT
1.1
Torque to
90 in-lbs 1.2

PRIME DESIGN, A SAFE FLEET BRAND 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪ Phone: [phone] ▪ 1.8.PRIME.RACK ▪ Fax: [phone] ▪ Email:[email protected] ▪ www.primedesign.net
TM & © 2014 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6,092,972, 6,099,231, 6,202,807, 6,427,889, 6,764,268, 6,971,563 AND OTHER PATENTS PENDING
6
VBC-NV200 ASSEMBLY INSTRUCTIONS–RIGHT SIDE CLAMP DOWN
CLAMP DOWN HANDLE CLAMP DOWN TUBE
2
3.2
3.1
3.3
3.4
Torque to 90 in-lbs
Torque to 90 in-lbs
HANDLE LATCH FRONT LADDER HOOK
SEE USER GUIDE FOR ADJUSTMENTS
4.2 Torque to 90 in-lbs
4.1
5.2
Torque to 90 in-lbs
5.1

PRIME DESIGN, A SAFE FLEET BRAND 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪ Phone: [phone] ▪ 1.8.PRIME.RACK ▪ Fax: [phone] ▪ Email:[email protected] ▪ www.primedesign.net
TM & © 2014 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6,092,972, 6,099,231, 6,202,807, 6,427,889, 6,764,268, 6,971,563 AND OTHER PATENTS PENDING
7
6
6
ADDITIONAL INFORMATION
For additional information regarding your VBC-NV200 Ladder Rack,
please visit the Prime Design Technical Communications website at:
http://pdtechcomm.com/us/
From your computer, click on the “Products“ tab on the toolbar, then
nd your rack model according to your vehicle manufacturer, vehicle
model, then rack type.
Using a QR code reader in your smart phone or tablet, read the QR
Code shown below and follow the same steps as you would from your
laptop or computer.
If you’re viewing this document as an interactive PDF, you may simply
click on the QR Code below to access the Prime Design Technical
Communications website.
LADDER STOPS
VBC-NV200 ASSEMBLY INSTRUCTIONS–LADDER STOPS
6.2
Torque to 90 in-lbs
6.1
Loosen nuts
LADDER STOPS

USAM-VBCNV200-US01 Rev-A 0515