
225415-ED1.-22/04/2022
All contents current at timeof publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
©
2022 SALTO Systems S.L. 1/4
The mounting with other spindles voids the guaranty.
Le montage d'autres carrés annulera le garantie.
El montaje de otros cuadradillos anula la garantia.
NOTE: Screws and spindles are included in the box of the reader.
NOTE: Les vis et les carrés sont inclus dans la boite du lecteur.
NOTA:Los tornillos y cuadradillos están incluidos en la caja del lector.
Eng
E
F
Installation guide
Guide d'installation
Guía de instalación
OUTSIDE
EXTÉRIEUR
EXTERIOR
INSIDE
INTÉRIEUR
INTERIOR
Only SALTO spindle.
Seulement carrés SALTO.
Solo cuadradillos SALTO.
SALTO .
7"
(178mm)
6"
(152mm)
O
1-25/32"
(
O
45mm)
21/64"
(8mm)
AF i
2
xx.. series
AF i
7
xx.. series
1-3/4" (45mm)<Door thickness<4-15/16" (125mm).
1-3/4" (45mm)<Épaisseur d' porte<4-15/16" (125mm).
1-3/4" (45mm)<Espesor de puerta<4-15/16" (125mm).
1-3/4" (45mm)<⻔
<4-15/16" (125mm).
Mortise lock not included
Serrure à mortaiser non inclusa
Cerradura de embutir no incluida
Recommendation for Customer’s lever set installation on SALTO
AElement. See : 4AN01299
*
(*) Only for door thickness > 2-9/16" (65mm).
(*) Seulement pour portes de épaisseur > 2-9/16" (65mm).
(*) Solo para grosor de puerta > 2-9/16" (65mm).
(*)
门
2-9/16“ (65mm)
SALTO LA1T0770F2
SALTO LA1T0770F7
SALTO LA1T1770F2
SALTO LA1T1770F7
Inside lever
Outside spindle
Reader
Reader cover
Batteries
(LR06 AA)
Fixing screws
Control
Outside lever
Inside
Intérieur
Interior
Outside
Extérieur
Exterior
PZ2 (X2)
PZ2 (X2)
BOLT (Depending
on door thickness)
(
⻔
)
PZ2 (X2)
PZ2 (X2)
ALLEN 3(X2)
Control front plate
CABLE CLAMP(X2)
夹
Recommandation pour l’installation des béquilles client sur
Salto AElement. Voir: 4AN01299
SALTO
Aelement
For door preparation see: 221373 or 4DS00020.
Pour préparation de la porte, voir: 221373 ou 4DS00020.
Para mecanizado de puerta, ver: 221373 ó 4DS00020.
⻔
221373-4DS00020.
Installation guide
AElement Fusion for ANSI mortise locks
11/16" min.
(17mm)
4-15/16" max.
(125mm)
2-1/8" max.
(55mm)
Lock and control must be aligned.
La serrure et le contrôleur doivent être alignés.
Cerradura y control alineados.
(
⻔
)
Optional
Opcional
Optionnel
Privacy thumbturn
Inside spindle
*****
ZH
Recomendaciones para la instalación de manillas Cliente en
SALTO AElement. Ver: 4AN01299