Samsung SDS-P5080 User manual

English _1
SAMSUNG ALL-IN-ONE SECURITY SYSTEM
SAMSUNG ALL-IN-ONE SECURITY SYSTEM
KIT MODEL
KIT MODEL
SDS-P3040
SDS-P3040
/
/
V4040
V4040
/
/
P4080
P4080
/
/
P5080
P5080
/
/
P5100
P5100
/
/
P5101
P5101
DVR MODEL
DVR MODEL
SDR-3100
SDR-3100
/
/
4100
4100
/
/
4101
4101
/
/
5100
5100
Quick Start Guide
Thank you for purchasing a Samsung DVR Security System.
Follow the simple steps in this guide to set up and start using your new system.
If you have any questions or need help installing your new product please contact our free technical support.
Internet: http://www.samsungsecurehome.eu/
INSTALLING YOUR SYSTEM
MImages may differ depending on the model.
❒4CH DVR
Front
Rear
1Connect a mouse 4Connect the DC adaptors
2Connect a camera 5Connect to a network router
3Connect a monitor
POWER REC
DIGITAL VIDEO RECORDER
1
1234G1 COM G
ALARM IN ALARM OUT
NETWORK
USB
CONSOLE
VGA
AUDIO IN
AUDIO OUT
VIDEO OUT
DC 12V
+ -
RS 485
2
3
4
5

2_ English
❒8CH DVR
Front
Rear
❒16CH DVR
Rear
GETTING STARTED
❒Connecting the DVR to Live monitoring
1
3 Connect the power code to the DVR.1 Connect the DVR to the monitor and
mouse.
2 Connect the DVR to the router.
CONSOLE
AUDIO IN
CH1 CH2 VGA OUT
DC 12V
NETWORK
AUDIO IN
VIDEO IN
VIDEO IN
1234
5678
CH3 CH4
AUDIO OUT
HDMI
+ -
RS 485
3
4
2
5
CONSOLE
AUDIO IN
CH1 CH2 VGA OUT
DC 12V
NETWORK
AUDIO IN
VIDEO IN
VIDEO IN
12345678
910 11 12 13 14 15 16
CH3 CH4
AUDIO OUT
HDMI
+ -
RS 485
3
4
2
5
1 2 3 4 G 1 COM G
ALARM IN ALARM OUT
NETWORK
USB
CONSOLE
VGA
AUDIO IN
AUDIO OUT
VIDEO OUT
DC 12V
12
34

English _3
VIEW THE LAUNCHER MENU
The Launcher menu appears on the bottom of the live screen.
1.
In Live mode, right-click to display the context menu and select
<Show Launcher>.
2.
Move the cursor to the bottom and click a desired item in the
Launcher menu.
MIf no input is entered for 10 seconds, the menu will disappear.
The Launcher menu can be accessed only by using the mouse.
Screen mode may vary depending on the DVR supported channel.
1Date/Time 5Zoom 9Play
2Screen Mode 6PTZ 0Record
3Menu Expansion Button 7Alarm
4Audio 8Freeze
SYSTEM SETTING
❒Time Setting
1.
Right click on the mouse and select main menu.
2.
In the login window, enter the password and click <OK>.
JThe initial administrator ID is “admin” and the password should be set
when logging in for the first time.
Set password for your wireless network if you use the product with a
wireless router. Being not protected with password or using the default
wireless router password may expose your video data to potential threat.
Please change your password every three months to safely protect
personal information and to prevent the damage of the information theft.
Please, take note that it’s a user’s responsibility for the security and any
other problems caused by mismanaging a password.
3.
Click on Date/Time/Language. Set time and date.
2013-01-01
01:10:25
2013-01-01
01:10:25
AlarmPTZ Freeze
1234567890

4_ English
4.
After filling in the information, Click <OK>.
Network Setting
❒Connection Mode
1.
Click on Network and select <Connection Mode>.
If there occur a problem with Connection Mode, check the connection
as “Installing your system” on page 1.
If you still have a problem, contact the nearest service center for more
information.
2.
Under <Connection> Tab.
Check <Connection Mode> is set to <Dynamic IP> as default.
If it connected successfully, you can see the success comment.
JIf you know Static IP information from your router, please select
<Static IP> and enter IP address, Gateway, and Subnet Mask etc.
M
Please refer to the Router Guide in provided CD when you use a static IP.
3.
Under <Protocol> Tab.
JWrite down your IP, Port(TCP) and Webviewer Port below.
1IP
2Port(TCP) 3Webviewer Port
4.
When completing the setting, click <OK>.
1
2
3

English _5
❒SETTING UP SAMSUNG iPOLiS DDNS
Since you will be accessing the DVR remotely, let’s setup your Samsung iPolis account first using the PC.
Go to Your PC
1.
Open your browser and go to http://www.samsungipolis.com and click
<LOGIN>.
2.
You first need to create an account.
Click <SIGN UP>.
3.
Follow-the account registration instructions on the website.
4.
After completing the account registration, login to your account.
JWrite down your User ID and Password below.
1ID 2Password
5.
Add your DVR to your account. Click <PRODUCT REGISTRATION>.
6.
Create a name (Product ID) for your DVR. Use 4 to 20 alphanumeric
characters without spaces. Select classification, model number of the
DVR and click <REGISTRATION>.
JModel Number
4CH DVR : SDR-3100 (SDS-P3040)
8CH DVR : SDR-4100 (SDS-P4080), SDR-4101 (SDS-V4040)
16CH DVR : SDR-5100 (SDS-P5080, SDS-P5100, SDS-P5101)
7.
After registration, you should see your product in the list.
JWrite down the product ID below.
3Product ID
8.
Click <LOGOUT> to close the Web Page.
1
2
sdr-3100HOME
sdr-3100
sdr-3100HOME sdr-3100
3

6_ English
Go back to DVR
1.
From network tab, click on <DDNS>.
2.
Under DDNS Site, select <iPOLiS>.
3.
Under Product ID, enter the product ID you created on the Samsung
iPOLiS website.
Under Quick Connect, select <Use> and click <OK>.
JWrite down the DDNS Host address:.
1DDNS Host Address
If the connection was not successful, your router may not be
supporting UPNP.
For more information on enabling UPNP on your router, please see
User manual.
1

English _7
REMOTE MONITORING
From a Windows computer
1.
Open Windows Internet Explorer and go to http://www.samsungipolis.
com and click <LOGIN>.
2.
Login with the user ID and password you wrote down earlier.
3.
Click < >.
4.
You will be asked to install the active X plug-in.
5.
Enter the user ID and password for the DVR.
JIf the screen to the bottom right does not appear, check if the DVR set is
connected properly with a valid IP address.
6.
Now, you can install the cameras and place the cameras where they are
needed.
sdr-3100HOME sdr-3100

8_ English
USING A SMARTPHONE
❒For Android Phone
1 Visit Play Store to Download the
Samsung iPOLiS mobile app.
SDR-3100
2 Search for Samsung iPOLiS. 3 Launch the iPOLiS mobile app add the
DVR.
Tap on the menu icon and tap <Add
Device>.
SDR-3100
www.samsungipolis.com/sdr-3100
80
4254
admin
4 Register the DVR to the iPOLiS mobile.
JName : Create a name for the DVR you are adding
Model : Select the DVR
Host : If you are using Samsung iPOLiS DDNS, enter the DDNS Host Address you
wrote down earlier. (Page 5, 6)
It should be www.samsungipolis.com/Product ID
HTTP Port : Enter the HTTP Port you wrote down earlier.
RTSP Port : Enter the last port number of Device Port you wrote down earlier.
ID : Default ID is <admin>. If you change before, please enter changed ID.
Password : If you changed before, please enter changed Password.
Camera : Select the cameras you want to view.
JThe initial administrator ID is “admin” and the password should be set when
logging in for the first time.
Set password for your wireless network if you use the product with a wireless
router. Being not protected with password or using the default wireless router
password may expose your video data to potential threat.
Please change your password every three months to safely protect personal
information and to prevent the damage of the information theft.
Please, take note that it’s a user’s responsibility for the security and any other
problems caused by mismanaging a password.

English _9
❒For iPhone
1 Visit App Store to Download the
Samsung iPOLiS mobile app.
Install
SAMSUNG TECHWIN C...
Utilities
2 Search for Samsung iPOLiS. 3 Launch the iPOLiS mobile app add the
DVR.
At the Add Device pop-up, tap <OK>.
SDR-3100
DVR
www.samsungipolis.com/s...
80
4254
4 Register the DVR to the iPOLiS mobile.
MFor more information of each item, refer to “For Android Phone”.
RECORDING AND PLAYBACK
1.
Press the [MENU] button on the remote control.
Use the left/right button (◄►) to select <Record>.
Use the up/down buttons (▲▼) to move to <Recording Schedule>,
and press [ENTER] button.
2.
Set each of the Record Schedule options.
To change the setting, set the channel then select the time and date you
when want to record.
Press the [ENTER] button while the cells are selected.
The record type will cycle through <No Recording>-<Continuous>-
<Event>-<Both(Cont&Evnt)>.
The default is as shown.

10_ English
3.
To change the record quality & resolution, select <REC Quality &
Resolution>.
JIf you change the setting of the resolution and the remaining rate, the
remaining count shows each available resolution.
System Record Size Possible FPS
NTSC
CIF 352 × 240
OFF, 1~302CIF 704 × 240
4CIF 704 × 480
PAL
CIF 352 × 288
OFF, 1~252CIF 704 × 288
4CIF 704 × 576
4.
In Live mode, click <Search> in the right-click menu.
Select <Time Search> in the <Search> menu.
Select a desired date in the calendar, and a desired timeline in the Time
bar, and press the <Play> button if you want to watch the recorded
video.
JThe colored line indicates types of the recording data.
If you want to play a time specific data, enter an exact time.
5.
If you have set the event recording, you can play a desired scene using
the <Event Search> function. In Live mode, click <Search> in the right-
click menu. Select <Event Search> in the <Search> Menu.
Set a desired date in the calendar and the result will be listed on the
table. Select one you wish to view and press the <Play> button.
6.
You can change the play speed or channel, or stop the playback using
the onscreen button bar.